Thank you @ezraholm50 :-)
Sorry for the late answer, didnt check the notifications.

So far, i have not noticed any effect on humidity. after a long shower, the system temperature is 3-4 degrees clecius higher, but that is not a problem in my eyes. But i also have ventilation holes at the top of the mirror and a vent in the bathroom.

Kwaeksler

@Blauenfeldt Thank you :-)
I am not 100% sure because i bought it by a local dealer and i dont have this informations on the invoice. But i think it is ~20% light transmission.
I also ordered some test pieces by glastroesch.ch and my mirror is about like the 20% from this dealer:
glastroesch.ch - Spionspiegel

I am using an old 24" BenQ-Screen which i bought on eBay - I can see tonight if I can find a more detailed description.

Hope this will help you :-)

@Snille Yes i am controlling the strip with the I/O-Pins :-)
I have taken these instructions as a help: Raspberry Pi & RGB LED-Strips

@Snille Thank you :-)
Its a simple script to fade in/fade out the LEDs when the PIR-Sensor is triggered.
I can post it later if you want.

Hi Everyone,

it is done! I replaced my boring mirror in the bathroom by a MagicMirror and i am super happy with the result :-)
First of all, here some photos from the creation:

The finished product:

Used Modules:

• General:
  – MMM-PIR-Sensor
  – MMM-pages
  – MMM-Buttons
  – MM-hide-all
• First Page:
  – Clock
  – Calender
  – Calendar_monthly
  – Currentweather
  – Weatherforecast
  – Newsfeed
  – MMM-SystemTemperature
  – MMM-Spotify
• Second Page:
  – MMM-HTMLSnippet
  – Selfmade Python Script to get my local club standings
  – MMM-NFL

Thanks for all the help here in the forum especially from the developers!
Hope you like my Mirror and greetings from Germany

Kwaeksler :-)

@CloudWalker that sounds good :-) Have you already tried it?

Clean Setup, i like it :-)
Did you glue the circuit boards?

@Sean said in MMM-Spotify:

updated

1.1.0 (2019-03-25)

• Added: touch(click) interface
• Device Limitation : Now you can allow or limit devices to display its playing on MM.
• Some CSS structure is changed.
• Now this module can emit SPOTIFY_* notifications for other module.

@Sean that sounds very great. I will update it later, thank you very much! :-)

@Cr4z33 thats true. That was one of my feature request on page one. I only wanted to see the information about the song on the mirror when i play it on it. Because for other familie members the information about my playing songs arent very interessting when i am not at home. :-D

@Sean That sounds great :-) Thank you!

Hello,

i installed this module today. Works perfect, thanks for this great work :-) I just overwrited the css a little bit, hope this is ok for you!

And now my question: is it possible to show this module only on my mirror when i play music on it? Because when i am not at home i think my music selection isnt very interessting for my girlfriend :-D

Thank you
Kwaeksler

Hey Guys,

well i have a question about the Calendar Module. Is it possible to use an other calander instead of icould?
I already tried it but it doesnt work…
I use with my girlfriend a community calendar called TimeTree. Started with just an app but now there have also a web access. Is it possible to use this one?

Would be very cool because then i can see all appointments in the mirror.

Maybe someone have some experience with that.

Thanks :-)
Kwaeksler

@ostfilinchen i had the nodejs Version 6.9.4.

So i updated the version with:

curl -sL https://deb.nodesource.com/setup_7.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo npm install -g npm

Now i have Version v7.4.0 but still the same error like before :-(

@ostfilinchen

Yes, i updated the pi yesterday with:

sudo apt-get update
sudo apt-get dist-upgrade
sudo reboot

after a long time of waiting the same warning sign :-(

@ostfilinchen No :-(
i still get a small warning sign and an “unknown error”

the incoming call shows me a number, not a name.

@ostfilinchen my current config looks like this:

	{
        module: 'MMM-FRITZ-Box-Callmonitor',
        position: 'top_right', 
        header: "Anrufliste", 
        config: {
        	maximumCallDistance: 7200,
			username: "***********",
			password: "********************",
			showContactsStatus: true,
			vCard: false
        }
	},

i think it looks good?

@ostfilinchen
i tried the vCard option first, but actually it should be disabled…
i think so. with git pull in “/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor” i get “Already up-to-date”.

@ostfilinchen said in MMM-FRITZ-Box-Callmonitor:

@kwaeksler if you start the mirror with pm2, what says the pm2 logs mm?

in mm-error-0.log i searched for “callmonitor” and got this error:

TypeError: path must be a string or Buffer
at TypeError (native)
at Object.fs.readFile (fs.js:303:11)
at Object.fs.readFile (ELECTRON_ASAR.js:451:25)
at Object.parseVcardFile (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_modules/vcard-json/lib/vcard-json.js:65:6)
at Class.parseVcardFile (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_helper.js:107:9)
at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-FRITZ-Box-Callmonitor/node_helper.js:56:10)
at Socket. (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:98:10)
at emitTwo (events.js:106:13)
at Socket.emit (events.js:191:7)
at Socket.onevent (/home/pi/MagicMirror/node_modules/socket.io/lib/socket.js:335:8)
Missing error handler on socket.

@ostfilinchen said in MMM-FRITZ-Box-Callmonitor:

The Best way to find errors is to Start the mirror with npm start dev directly on the pi. On the right side you find Infos about the error.

Mhm… i dont get any warnings or errors in the console