Sam,

Could you recommend a weather app?

Thanks,

Tim

Anyone having problems with their weather app?

Mine stopped working about a week ago, can’t get it back up and running.
Using Wunderground.

Thanks,

Tim

Thanks for the assist from this forum.
Finally finished mirror, with 24" monitor, pi zero w.

paddyhughes,

Had the exact same issue.

Had one calendar called “worK”, all the rest had the long UUID names.

I keep looking for the “work” calendar, of course it’s UUID was “work”.

Put that in and now it works.

Some lessons are learned the hard way.

Maestro-82

I have several reoccurring events on the same day, only one of each event is showing up. The number of events is set at 10 but it is going out at least 4 months with that set. It should only go out about 3 weeks with 10 events listed. I’ll try raising the number of events and limiting the time.

So I have three separate calendars linked to ical, running on my magic mirror. I see events from all three calendars, but many events are missing. Any ideas?

So . . . . . . restarted the mirror and now it works. Moving on to adding other calendars, wish us luck.

Trying to tighten up my weather module.
See picture.

Any hints on changing those areas/fonts?

Thanks

Solved this issue by using “http:” not “https:” in calendar url but now my calendar shows no events. I looked into the actual “modules/calendars/****.ics” file and it contains multiple events. Any suggestions?

@arthurgarzajr Being the newbie that I am I typed “bottom-bar” for location. Worked on it for an hour before the “-” was replaced with “_”. Amazing how one letter can use up your time. No the module is working fine now.

Any issues running this module lately?

Thanks

@Mykle1 thanx

Myke1

Can’t seem to figure out what controls font size of the forecasted precipitation % field. Any hints?

Thanks

@Mykle1
So by playing (I do mean playing as I am a newbie) with the MMM_WunderGround.css file, discovered:

.MMM-WunderGround .weather-icon (is the small forecast icon)
I was able to adjust size by changing the width.

.MMM-WunderGround .currentWeatherIcon (is large symbol next to current temp)
I was able to adjust the width and height % to change size.

@maestro82 Got it, a little trail and error.

What variables control the size of the large current weather icon and the small forecast icons? I was trying to make the current icon slightly smaller and have somehow managed to make the forecast icon micro sized. Can’t seem to get it back now.

Thanks,

Sorry the arrows didn’t post to pict.
Looking to make the sunrise/sunset icons orange.
Trying to increase size of EL PASO, TX at top (header)
Want to remove the total rainfall 0in column
Trying to reduce gap between high and low temps

Thanks

I finally have my Magic Mirror up and running on pi zero w. Now I have been searching for ways to customize the display. See attached pict and note the 4 items I am trying to fix, remove or change. Any assistance would be appreciated. Still a newbie so go gentle if possible. 

@maestro82 So I was able to get through the tutorial with no errors, all files discovered and synced. But when I run MagicMirror calendar says “Loading…” and never loads. I have changed interval to 5min in timer file. Any advise to troubleshoot?

Thanks,

Two run two calendars, would I need to adjust config.js file as well?

Thanks