Topics created by misk0

@magmar hey, you’ve done great detective work :) Yes, I removed the frame to be able to attach monitor as closest as possible to the glass.
As you know, casing could be very different from solid 1-3cm wide borders to frame-less with almost no edges.
I agree best solution would be to find the same monitor I checked local classifieds but I can’t find the same model so I’ll choose one which has closest dimension and give a try. If height is smaller than my wooden frame I’ll find a way to fix it. If it’s larger then I’ll have to sand down if it’s possible.

Hi to all,

I’m building MagicMirror and I’m using Samsung Syncmaster 2494 monitor. When I disassembled it I discovered this “bn96-10836c” Assy Board P Touch which is used to turn on monitor. Without it I can’t turn on monitor. It’s connected with 5 wires to the main board. So do you have any ideas how can use these wires or which I have to connect with a trigger to turn on monitor?

I would like to make always on when there is a power cable connected. How did you solve this problem?