I’ll do some more research and let you know
Thank you very much. I’m starting to despair. :loudly_crying_face:
I take the balenaEtcher for witing the SDcard. What program are using you?
A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
P
Posts
-
RE: Install problemsposted in Troubleshooting
-
RE: Install problemsposted in Troubleshooting
soo i have tested on a ohter SD card, but its a similar error. (See in the terminal box.) The next attempt is, i load the Raspbian-image again form the Raspberry.org website and test it on a ohter Raspberry. I will report, if i try this.
Terminal Box
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ install log being saved to /home/pi/install.log Updating packages ... Installing helper tools ... Check current Node installation ... Node.js is not installed. Installing Node.js ... Warning: apt-key output should not be parsed (stdout is not a terminal) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden NEUEN Pakete werden installiert: nodejs 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 14,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 77,3 MB Plattenplatz zusätzlich benutzt. Holen:1 https://deb.nodesource.com/node_10.x buster/main armhf nodejs armhf 10.19.0-1nodesource1 [14,6 MB] Es wurden 14,6 MB in 6 s geholt (2.478 kB/s). Vormals nicht ausgewähltes Paket nodejs wird gewählt. (Lese Datenbank ... 93551 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_10.19.0-1nodesource1_armhf.deb ... Entpacken von nodejs (10.19.0-1nodesource1) ... nodejs (10.19.0-1nodesource1) wird eingerichtet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... node version is Node.js installation Done! version=v10.19.0 Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.13.4 No npm upgrade necessary. Cloning MagicMirror ... Klone nach 'MagicMirror' ... remote: Enumerating objects: 331, done. remote: Counting objects: 100% (331/331), done. remote: Compressing objects: 100% (295/295), done. remote: Total 331 (delta 42), reused 194 (delta 23), pack-reused 0 Empfange Objekte: 100% (331/331), 676.44 KiB | 1.71 MiB/s, Fertig. Löse Unterschiede auf: 100% (42/42), Fertig. Cloning MagicMirror Done! bash: Zeile 296: [: !-e: Einstelliger (unärer) Operator erwartet. Installing dependencies ... npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated rrule-alt@2.2.8: Please use rrule instead npm WARN deprecated left-pad@1.3.0: use String.prototype.padStart() npm WARN deprecated mkdirp@0.5.1: Legacy versions of mkdirp are no longer supported. Please update to mkdirp 1.x. (Note that the API surface has changed to use Promises in 1.x.) npm WARN deprecated webdriverio@4.14.4: outdated version, please use @next npm WARN deprecated mkdirp@0.5.3: Legacy versions of mkdirp are no longer supported. Please update to mkdirp 1.x. (Note that the API surface has changed to use Promises in 1.x.) npm WARN deprecated core-js@2.6.11: core-js@<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js@3. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/async-limiter npm ERR! dest /home/pi/MagicMirror/node_modules/.async-limiter.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/async-limiter' -> '/home/pi/MagicMirror/node_modules/.async-limiter.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-18T07_36_56_451Z-debug.log Unable to install dependencies! pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ install log being saved to /home/pi/install.log Updating packages ... Installing helper tools ... Check current Node installation ... Node currently installed. Checking version number. Minimum Node version: v10.1.0 Installed Node version: v10.19.0 No Node.js upgrade necessary. Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.13.4 No npm upgrade necessary. Cloning MagicMirror ... Klone nach 'MagicMirror' ... remote: Enumerating objects: 331, done. remote: Counting objects: 100% (331/331), done. remote: Compressing objects: 100% (295/295), done. remote: Total 331 (delta 42), reused 194 (delta 23), pack-reused 0 Empfange Objekte: 100% (331/331), 676.44 KiB | 1.56 MiB/s, Fertig. Löse Unterschiede auf: 100% (42/42), Fertig. Cloning MagicMirror Done! bash: Zeile 296: [: !-e: Einstelliger (unärer) Operator erwartet. Installing dependencies ... npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated rrule-alt@2.2.8: Please use rrule instead npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated mkdirp@0.5.1: Legacy versions of mkdirp are no longer supported. Please update to mkdirp 1.x. (Note that the API surface has changed to use Promises in 1.x.) npm WARN deprecated webdriverio@4.14.4: outdated version, please use @next npm WARN deprecated left-pad@1.3.0: use String.prototype.padStart() npm WARN deprecated mkdirp@0.5.3: Legacy versions of mkdirp are no longer supported. Please update to mkdirp 1.x. (Note that the API surface has changed to use Promises in 1.x.) npm WARN deprecated core-js@2.6.11: core-js@<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js@3. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/error-ex npm ERR! dest /home/pi/MagicMirror/node_modules/.error-ex.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/error-ex' -> '/home/pi/MagicMirror/node_modules/.error-ex.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-18T11_26_50_304Z-debug.log Unable to install dependencies! pi@raspberrypi:~ $ -
RE: Install problemsposted in Troubleshooting
Thank you for your help. I buy a new card and try it.
-
RE: Install problemsposted in Troubleshooting
:weary_face:
Its the same errors. Do you have an other idea please?pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ install log being saved to /home/pi/install.log Updating packages ... Installing helper tools ... Check current Node installation ... Node currently installed. Checking version number. Minimum Node version: v10.1.0 Installed Node version: v10.19.0 No Node.js upgrade necessary. Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.13.4 No npm upgrade necessary. Cloning MagicMirror ... Klone nach 'MagicMirror' ... remote: Enumerating objects: 331, done. remote: Counting objects: 100% (331/331), done. remote: Compressing objects: 100% (295/295), done. remote: Total 331 (delta 42), reused 194 (delta 23), pack-reused 0 Empfange Objekte: 100% (331/331), 676.44 KiB | 1015.00 KiB/s, Fertig. Löse Unterschiede auf: 100% (42/42), Fertig. Cloning MagicMirror Done! bash: Zeile 296: [: !-e: Einstelliger (unärer) Operator erwartet. Installing dependencies ... npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated rrule-alt@2.2.8: Please use rrule instead npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated left-pad@1.3.0: use String.prototype.padStart() npm WARN deprecated webdriverio@4.14.4: outdated version, please use @next npm WARN deprecated core-js@2.6.11: core-js@<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js@3. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/after npm ERR! dest /home/pi/MagicMirror/node_modules/.after.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/after' -> '/home/pi/MagicMirror/node_modules/.after.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-13T16_17_07_011Z-debug.log Unable to install dependencies! pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ install log being saved to /home/pi/install.log Updating packages ... Installing helper tools ... Check current Node installation ... Node currently installed. Checking version number. Minimum Node version: v10.1.0 Installed Node version: v10.19.0 No Node.js upgrade necessary. Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.13.4 No npm upgrade necessary. Cloning MagicMirror ... Klone nach 'MagicMirror' ... remote: Enumerating objects: 331, done. remote: Counting objects: 100% (331/331), done. remote: Compressing objects: 100% (295/295), done. remote: Total 331 (delta 42), reused 194 (delta 23), pack-reused 0 Empfange Objekte: 100% (331/331), 676.44 KiB | 1.56 MiB/s, Fertig. Löse Unterschiede auf: 100% (42/42), Fertig. Cloning MagicMirror Done! bash: Zeile 296: [: !-e: Einstelliger (unärer) Operator erwartet. Installing dependencies ... npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated rrule-alt@2.2.8: Please use rrule instead npm WARN deprecated left-pad@1.3.0: use String.prototype.padStart() npm WARN deprecated webdriverio@4.14.4: outdated version, please use @next npm WARN deprecated core-js@2.6.11: core-js@<3 is no longer maintained and not recommended for usage due to the number of issues. Please, upgrade your dependencies to the actual version of core-js@3. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: @types/node@10.17.17 (node_modules/@types/node): npm WARN enoent SKIPPING OPTIONAL DEPENDENCY: ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/@types/node' -> '/home/pi/MagicMirror/node_modules/@types/.node.DELETE' npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/ansi-styles npm ERR! dest /home/pi/MagicMirror/node_modules/.ansi-styles.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/ansi-styles' -> '/home/pi/MagicMirror/node_modules/.ansi-styles.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-13T16_19_14_063Z-debug.log Unable to install dependencies! pi@raspberrypi:~ $ -
RE: Install problemsposted in Troubleshooting
@Pielo said in Install problems:
. I have try the automatic installer and the manuell installer. The errors are the same. Can someone tell me, what I doing wrong?
thanks for your answer. I have install Raspbian a new. At next, i install all updates and at last the MagicMirro. But this is the same errors. What can i do now?
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)" $$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\ $$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\ $$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ | $$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ | $$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/ $$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ | $$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\ \__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________| $$\ $$ | \$$$$$$ | \______/ install log being saved to /home/pi/install.log Updating packages ... Installing helper tools ... Check current Node installation ... Node.js is not installed. Installing Node.js ... Warning: apt-key output should not be parsed (stdout is not a terminal) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden NEUEN Pakete werden installiert: nodejs 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 14,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 77,3 MB Plattenplatz zusätzlich benutzt. Holen:1 https://deb.nodesource.com/node_10.x buster/main armhf nodejs armhf 10.19.0-1nodesource1 [14,6 MB] Es wurden 14,6 MB in 13 s geholt (1.119 kB/s). Vormals nicht ausgewähltes Paket nodejs wird gewählt. (Lese Datenbank ... 93551 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_10.19.0-1nodesource1_armhf.deb ... Entpacken von nodejs (10.19.0-1nodesource1) ... nodejs (10.19.0-1nodesource1) wird eingerichtet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... node version is Node.js installation Done! version=v10.19.0 Check current NPM installation ... NPM currently installed. Checking version number. Minimum npm version: V6.0.0 Installed npm version: V6.13.4 No npm upgrade necessary. Cloning MagicMirror ... Klone nach 'MagicMirror' ... remote: Enumerating objects: 331, done. remote: Counting objects: 100% (331/331), done. remote: Compressing objects: 100% (295/295), done. remote: Total 331 (delta 42), reused 194 (delta 23), pack-reused 0 Empfange Objekte: 100% (331/331), 676.44 KiB | 1.12 MiB/s, Fertig. Löse Unterschiede auf: 100% (42/42), Fertig. Cloning MagicMirror Done! bash: Zeile 296: [: !-e: Einstelliger (unärer) Operator erwartet. Installing dependencies ... npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: inherits@2.0.4 (node_modules/inherits): npm WARN enoent SKIPPING OPTIONAL DEPENDENCY: ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/inherits' -> '/home/pi/MagicMirror/node_modules/.inherits.DELETE' npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/minimist npm ERR! dest /home/pi/MagicMirror/node_modules/.minimist.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/minimist' -> '/home/pi/MagicMirror/node_modules/.minimist.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-13T13_59_34_858Z-debug.log Unable to install dependencies! pi@raspberrypi:~ $ -
Install problemsposted in Troubleshooting
Hello,
I will install the MagicMirror on my Pi3b. But I become any errors. I have try the automatic installer and the manuell installer. The errors are the same. Can someone tell me, what I doing wrong?
Terminal:
pi@raspberrypi:~ $ curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash - ## Installing the NodeSource Node.js 10.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease Paketlisten werden gelesen... Fertig ## Confirming "buster" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_10.x/dists/buster/Release' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add - OK ## Creating apt sources list file for the NodeSource Node.js 10.x repo... + echo 'deb https://deb.nodesource.com/node_10.x buster main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src https://deb.nodesource.com/node_10.x buster main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease Holen:3 https://deb.nodesource.com/node_10.x buster InRelease [4.584 B] Holen:4 https://deb.nodesource.com/node_10.x buster/main armhf Packages [766 B] Es wurden 5.350 B in 2 s geholt (3.468 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 10.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add - echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn pi@raspberrypi:~ $ sudo apt install -y nodejs Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden NEUEN Pakete werden installiert: nodejs 0 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 14,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 77,3 MB Plattenplatz zusätzlich benutzt. Holen:1 https://deb.nodesource.com/node_10.x buster/main armhf nodejs armhf 10.19.0-1nodesource1 [14,6 MB] Es wurden 14,6 MB in 18 s geholt (813 kB/s). Vormals nicht ausgewähltes Paket nodejs wird gewählt. (Lese Datenbank ... 93551 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_10.19.0-1nodesource1_armhf.deb ... Entpacken von nodejs (10.19.0-1nodesource1) ... nodejs (10.19.0-1nodesource1) wird eingerichtet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... pi@raspberrypi:~ $ git clone https://github.com/MichMich/MagicMirror Klone nach 'MagicMirror' ... remote: Enumerating objects: 13803, done. remote: Total 13803 (delta 0), reused 0 (delta 0), pack-reused 13803 Empfange Objekte: 100% (13803/13803), 13.99 MiB | 907.00 KiB/s, Fertig. Löse Unterschiede auf: 100% (7998/7998), Fertig. pi@raspberrypi:~ $ cd MagicMirror/ pi@raspberrypi:~/MagicMirror $ npm install electron@6.0.12 npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/after npm ERR! dest /home/pi/MagicMirror/node_modules/.after.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/after' -> '/home/pi/MagicMirror/node_modules/.after.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-10T15_21_01_144Z-debug.log pi@raspberrypi:~/MagicMirror $ npm install npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically unmaintained. Move on to something better. This package will continue to work with Grunt v1, but it will not receive any updates. npm WARN deprecated @types/vfile-message@2.0.0: This is a stub types definition. vfile-message provides its own type definitions, so you do not need this installed. npm ERR! code ENOENT npm ERR! syscall rename npm ERR! path /home/pi/MagicMirror/node_modules/acorn npm ERR! dest /home/pi/MagicMirror/node_modules/.acorn.DELETE npm ERR! errno -2 npm ERR! enoent ENOENT: no such file or directory, rename '/home/pi/MagicMirror/node_modules/acorn' -> '/home/pi/MagicMirror/node_modules/.acorn.DELETE' npm ERR! enoent This is related to npm not being able to find a file. npm ERR! enoent npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2020-03-10T15_23_36_636Z-debug.log pi@raspberrypi:~/MagicMirror $Best regards
Pielo