@bibaldo thank you :-)

@irich Hallo, das hab ich auch schon geschafft. Weiß denn jemand, wie ich die “,” durch “.” ersetzen kann. Will anstatt 434,595 das deutsche Format haben.
Danke für eventuelle Antworten.

Hello,
can someone tell me if it´s possible to sort the Output?
E.g. i see a call 3 days ago in the first line, then a call from 2 hours ago (second line), a call 2 day ago in 3rd line,…
I would like to see the youngest in the first line and the oldest in the last line.
Thanks for hints.

@yawns
Vielen Dank !!
Genau das war das Problem, jetzt klappte es :-)

@Mr.Sponti - thank you for your answer.
I now setup a second PI and installed Pimatic.
On both PI´s i installd socket.io and socket.io-Client.
My second pi works fine with pimatic and my first Pi works with MagicMirror.
I installed your modul as you described.

If i run a test on my MagicMirror-PI:

pi@raspberrypi3:~ $ node testpim.js
connected
[ { id: 'temperatur',
    name: 'Temperatur',
    template: 'device',
    attributes: [ [Object], [Object] ],
    actions: [],
    config:
     { class: 'HomeduinoRFWeatherStation',
       protocols: [Object],
       values: [Object],
       processingTemp: '$value',
       processingHum: '$value',
       xAttributeOptions: [],
       id: 'temperatur',
       name: 'Temperatur' },
...```
i see, that socket works too.
But on my MagicMirror is only get the message "Connecting to pimatic ..." 
 config.js:
*{
            module: 'MMM-M1-Pimatic',
            position: 'bottom_center',
            header: 'PIMATIC',
            host : 'xxx.xxx.xxx.xx',
            port : 80,
            user : 'user',
            passwd : 'passwort',
            config: {
                device: [
                    { 
                        name: 'Schrankschalter',
                        icon: 'icon-Default',
                        attributeName: 'schrankschalter.state',
                        defaultValue: false,
                        notification : 'Eingeschaltet'
                    },
                ],
            },
        },*
What am i doing wrong??
Thanks
P.S. are you german, because than it´s easier to talk about :-)

Hello,
please can someone tell me how i can install MagicMirror and Pimatic together.
If i install MagicMirror then i can´t install pimatic (needs a lower version of node).
If i install pimatic then i cant´t install MagicMirror (needs a higher version of node).
:-(
For MagicMirror i used the latest version.
For Pimatic is used the latest version.
For Raspberry i installed Raspberry stretch

Hello broberg,

yes i plugged the transmitter in my second pi and i received signals. Then i plugged it in my “mirror”-Pi and i can´t receive anything. On both Pi´s i installed the same OS.
I´m thinking that something i installed on my “mirror”-Pi is guilty for my problems.
I used the same Pins and sending is no problem.

Hello everybody,
first: my MagicMirror works fine.
second: sorry for my english.
third: my problem
But if i try to receive (via Shell) Information from 433 Mhz, i don´t get any responce.
Sending works without any problems.
All (receiver-modul and transmitter-modul) are connected correct.
On my second PI (without MagicMirror) sending and receiving works perfect.
Is there something special with receiving when MM is installed? I´m using standard-ports (GPIO27 and GPIO17) like most descriptions on the Internet.

@scarri said in Garmin Connect Integration:

Hi
First, i didn’t cleaned up my source code. At this point, userAccessToken and appAccessToken are useless.
But the way to get your activities history, make sure you have set the userGarmin variable, the one you use to log you in on garmin connect web site. And I think you have to set you activities “public” by PARAMETERS - “Privacy setting” section.
You can try with my garmin user : scarri77
All my activies are open to a public acces.
https://connect.garmin.com/proxy/activitylist-service/activities/scarri77?start=1&limit=10

Hey scarri,
thanks for the module.
I try to use it, but i don´t now what to write in “config.js”.
I tried:
…
{
module: ‘MMM-GarminActivities’,
header: ‘Fenix 3’,
position: ‘bottom_right’
},
…
but it don´t work.
In “MMM-GarminActivities.js” i added my userGarmin-ID.
If i send: “https://connect.garmin.com/proxy/activitylist-service/activities/[my userGarmin-ID]?start=1&limit=10” i get a correct Response.
Can you please send me your (anonymous) part of “config.js”?
Thanks Ralph