MMM-Remote-control all working except for monitor on and off

[karsten13]

everything o.k., the : was a typo here …

[diemen112]

I had to reinstall my MM but now i have the same problem again.
but the last time solution doesn’t help.
I have the same error as the previous printscreen.
and when i run vcgencmd in the terminal it works fine.

[karsten13]

@diemen112

are there any errors in the logs?

Output of docker logs mm?

[diemen112]

@karsten13 said in MMM-Remote-control all working except for monitor on and off:

docker logs mm

this is the logs output of the error

[05.07.2022 14:31.43.589] [LOG] Error: Command failed: vcgencmd display_power 0
vcgencmd: error while loading shared libraries: libvchiq_arm.so.0: cannot open shared object file: No such file or directory

at ChildProcess.exithandler (node:child_process:408:12)
at ChildProcess.emit (node:events:526:28)
at maybeClose (node:internal/child_process:1092:16)
at Socket.<anonymous> (node:internal/child_process:451:11)
at Socket.emit (node:events:526:28)
at Pipe.<anonymous> (node:net:687:12) {

killed: false,
code: 127,
signal: null,
cmd: ‘vcgencmd display_power 0’
}

[karsten13]

@diemen112

I can’t test this myself at the moment because I have no pi left for a fresh install.

I had to reinstall my MM

what does this mean exactly? Did you setup MM-OS from scratch?

[diemen112]

@karsten13

yes completely from scratch, i used the latest MM-OS version:
(2022-03-08_2022-01-28-magicmirroros-bullseye-armhf-lite-0.3.0)
and reinstalled all the modules on a RP3b+

[karsten13]

@diemen112

you are using a nightly build which is not an official release.

I was not aware of a bullseye version and this setup was never tested with bullseye.

So I recommend to use a buster version.

[diemen112]

@karsten13
ah thank you for your help

[thobach]

@diemen112 @karsten13 For bullseye I needed to change the display driver to the fake kms one (dtoverlay=vc4-fkms-v3d in /boot/config.txt) to have any effect of vcgencmd.
Afterwards vcgencmd only worked from the host, but not from @karsten13’s docker container. There I ran into the same problem with my MMM-Gestures module:

[09.10.2022 17:54.49.927] [LOG]   Sun Oct 09 2022 17:54:49 GMT+0200 (Central European Summer Time): exec error: Error: Command failed: vcgencmd display_power 0
vcgencmd: error while loading shared libraries: libvchiq_arm.so.0: cannot open shared object file: No such file or directory

I fixed it by mounting two more files from the host, my volume mounts now are:

    volumes:
      - ../mounts/config:/opt/magic_mirror/config
      - ../mounts/modules:/opt/magic_mirror/modules
      - ../mounts/css:/opt/magic_mirror/css
      - /tmp/.X11-unix:/tmp/.X11-unix
      - /opt/vc:/opt/vc/:ro
      - /usr/bin/vcgencmd:/usr/bin/vcgencmd
      - /usr/lib/arm-linux-gnueabihf/libvchiq_arm.so.0:/usr/lib/arm-linux-gnueabihf/libvchiq_arm.so.0
      - /usr/lib/arm-linux-gnueabihf/libvcos.so.0:/usr/lib/arm-linux-gnueabihf/libvcos.so.0
      - /var/run/dbus/system_bus_socket:/var/run/dbus/system_bus_socket