i resolved it, the problem was the wrong relative path

Here is my build.
I wanted my MM more like a dashboard, so i choose an old imac because of the space behind the screen to fit everything in.

I reused the atx and the speakers.
bought on ebay a display controller to hook the display up with the Raspberry.
Connect a PIR sensor and 12v to 5v converter.
Also used a max9744 amp to power the speakers.

hi,

i tried all the wallpaper modules but not any of them worked,
i don’t get any error’s but the wallpapers don’t display.

is this because MM OS has a different path?
i tried relative and absolute paths but no help.

Regards,

i resolved it, the problem was the wrong relative path

hi,

i tried all the wallpaper modules but not any of them worked,
i don’t get any error’s but the wallpapers don’t display.

is this because MM OS has a different path?
i tried relative and absolute paths but no help.

Regards,

@keaghoul first of all you need check the model nr. of the screen. its probably an LG screen, but i don’t know the model nr.
with that you can look on Ebay for a display controller for that particular screen.

if the PSU is still oke you kan use that one. you have to check which outlet is 12V+ continue is. and you can power the screen with that.
also you need a inverter from 12v to 5v for the Raspberry.

if you wan’t to use the the speakers u need also en simple AMP i use the TDA7297, i used a other one before but that one gives a white noise.

@karsten13 said in MMM-Remote-control all working except for monitor on and off:

docker-compose up -d

thank you!, that works.
i only run the command first ‘cp rpi.yml docker-compose.yml’ without the ‘:’.
can i run in trouble now? it looks like everything works fine.

kind regards

i made a fresh install with MMos because i bricked my SD card.
but now i installed Remote-control everything works except monitor off and on.
when i manually type the command “vcgencmd display_power 0” by SSH it works fine.
i tried removing the module and installing again but that was no help.

after i corrupting my sd card i made a new install with MMos.
but i can’t figure out how to update the screen after making updates to the config.js file.
i only get it by restarting the raspberry.

@banbutcher
And the calander module with the colors?!

@sonicgoose i think this is the one you need.

https://www.ebay.com/itm/HDMI-DVI-VGA-LCD-Lvds-Driver-Controller-Board-for-LM201W01-SLC1-LM201W01-SL-C1/313112850369?hash=item48e6faefc1:g:FakAAOSww2he4gaG

Here is my build.
I wanted my MM more like a dashboard, so i choose an old imac because of the space behind the screen to fit everything in.

I reused the atx and the speakers.
bought on ebay a display controller to hook the display up with the Raspberry.
Connect a PIR sensor and 12v to 5v converter.
Also used a max9744 amp to power the speakers.