Can MagicMirror run on other similarily priced hardware?

MMRIZE

I prefer Khadas VIM series, Just one of the thinnest form factors(11.5mm), which has enough ports. There definitely exist so many smaller SBCs but they do have not enough connectivities and power as Khadas VIM series.
You can make your MagicMirror thinner. (as long as you need it…)

https://www.khadas.com/

mumblebaj

@MMRIZE They are a bit pricey I would say but looks good.

plainbroke

@sdetweil
Will MM run on Libre Computer Board AML-S905X-CC (Le Potato) 2GB 64-bit Mini Computer they are only $55 on amazon. I think they will run Debian pretty easily.
I am going to try a few other projects with it that I have been wanting to do on a RPi, but they are pretty pricey right now. I thought this was worth a try. If it doesn’t work out, I will try a few of the projects on the support forum they have.

sdetweil

@plainbroke if they run debian, then you should have everything.

need a browser and nodejs.

looks like they are fairly stagnant tho, last os updates in 2019

https://libre.computer/products/s905x/

Ubuntu 18.04, where current is 22.04

plainbroke

@sdetweil
It only runs a patched version of stretch right now. I am able to do the project I was wanting to do with it… at $55 it is a little pricey and a LOT more work to get running debian, but it is doing the job. Finally found a wireless adapter for the Libre and it is rock steady… Only thing I do not like is I can not seem to get it to boot from a usb drive has to be from sd card…
Fun little learning experience…