MMM-EnergyMonitor help

mayfield

Hello everyone

https://github.com/deg0nz/MMM-EnergyMonitor

I’m having no luck with this module and was wondering if anyone else has had any? I understand this module calls data from MMM-Fronius2 module which I have working., Below is a picture and you can see the data from the Fronius2 module on the left is working but nothing on the EnergyMonitor module.

I’m not sure where to begin troubleshooting this I think the problem is in how the two modules communicate any ideas?

alt text

sdetweil

@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red

mayfield

@sdetweil said in MMM-EnergyMonitor help:

@mayfield can you show the config if the two modules, and any messenger in the console output, or in the developers window console ctrl-shift-i on the keyboard, select the console tab and scroll up to see any messages in red

Here is a photo of the console screen.

alt text

sdetweil

@mayfield open a terminal window and do

touch ~/MagicMirror/css/custom.css

that will make the error go away on next load of mm, you can do that with ctrl-r

ctrl-shift-i to get out of developer mode

sdetweil

@mayfield how about messages where u start mm

if npm start
or of pm2, then
pm2 logs --lines=50

mayfield

@sdetweil Do I run npm start pm2 logs --lines=50?

sdetweil

@mayfield no

how do you start MM?

npm start

or

pm2

if pm2 then
pm2 logs --lines=50

in eaither case u may need to redirect the output to a file

npm start > somefile.txt
or
pm2 logs --liness=50 > somefile.txt

mayfield

@sdetweil Hear are somefile.txt and my config.js


> magicmirror@2.21.0 start
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[09.10.2022 09:14.04.452] [LOG]   Starting MagicMirror: v2.21.0
[09.10.2022 09:14.04.467] [LOG]   Loading config ...
[09.10.2022 09:14.04.483] [LOG]   Loading module helpers ...
[09.10.2022 09:14.04.487] [LOG]   No helper found for module: alert.
[09.10.2022 09:14.04.523] [LOG]   Initializing new module helper ...
[09.10.2022 09:14.04.526] [LOG]   Module helper loaded: updatenotification
[09.10.2022 09:14.04.529] [LOG]   No helper found for module: clock.
[09.10.2022 09:14.04.968] [LOG]   Initializing new module helper ...
[09.10.2022 09:14.04.977] [LOG]   Module helper loaded: calendar
[09.10.2022 09:14.05.125] [LOG]   Initializing new module helper ...
[09.10.2022 09:14.05.149] [LOG]   Module helper loaded: MMM-Fronius2
[09.10.2022 09:14.05.153] [LOG]   No helper found for module: MMM-EnergyMonitor.
[09.10.2022 09:14.05.156] [LOG]   No helper found for module: weather.
[09.10.2022 09:14.05.212] [LOG]   Initializing new module helper ...
[09.10.2022 09:14.05.213] [LOG]   Module helper loaded: newsfeed
[09.10.2022 09:14.05.215] [LOG]   All module helpers loaded.
[09.10.2022 09:14.05.439] [LOG]   Starting server on port 8080 ... 
[09.10.2022 09:14.05.470] [LOG]   Server started ...
[09.10.2022 09:14.05.472] [LOG]   Connecting socket for: updatenotification
[09.10.2022 09:14.05.474] [LOG]   Starting module helper: updatenotification
[09.10.2022 09:14.05.475] [LOG]   Connecting socket for: calendar
[09.10.2022 09:14.05.477] [LOG]   Starting node helper for: calendar
[09.10.2022 09:14.05.483] [LOG]   Connecting socket for: MMM-Fronius2
[09.10.2022 09:14.05.484] [LOG]   Starting module helper: MMM-Fronius2
[09.10.2022 09:14.05.486] [LOG]   Connecting socket for: newsfeed
[09.10.2022 09:14.05.488] [LOG]   Starting node helper for: newsfeed
[09.10.2022 09:14.05.489] [LOG]   Sockets connected & modules started ...
[09.10.2022 09:14.05.950] [LOG]   Launching application.
[09.10.2022 09:14.11.582] [LOG]   Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics - Interval: 300000
[09.10.2022 09:14.11.670] [LOG]   Create new calendarfetcher for url: https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics - Interval: 300000
[09.10.2022 09:14.11.687] [LOG]   Create new newsfetcher for url: https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000
[09.10.2022 09:14.11.696] [INFO]  Checking git for module: MMM-Fronius2
[09.10.2022 09:14.11.745] [INFO]  Checking git for module: MMM-EnergyMonitor
[09.10.2022 09:14.11.796] [INFO]  Checking git for module: default
[09.10.2022 09:14.12.782] [INFO]  Calendar-Fetcher: Broadcasting 14 events.
[09.10.2022 09:14.14.376] [INFO]  Newsfeed-Fetcher: Broadcasting 34 items.

/* MagicMirror² Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * see https://docs.magicmirror.builders/configuration/introduction.html
 * and https://docs.magicmirror.builders/modules/configuration.html
 */
let config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror² is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	locale: "en-AU",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
                        module: "calendar",
                        header: "Holidays",
                        position: "top_left",
                        config: {
                                calendars: [
                                        {
                                                symbol: "calendar-check",
                                                maximumEntries: '4',
                                                //url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"
                                                url: "https://www.vic.gov.au/sites/default/files/2019-02/Victorian-school-term-dates.ics"
                                        },
                                        {
                                                symbol: "birthday-cake",
                                                maximumEntries: "10",
                                                url: "https://www.vic.gov.au/sites/default/files/2021-09/Victorian-public-holiday-dates.ics",
                                        }
                                ]
                        }
                },
		{
                        module: 'MMM-Fronius2',
                        position: "top_left",
                        header: "Solar Panels",
                        hidden: false,
                        ip: "192.168.2.146",
                        updateInterval: 3000,
                        wattConversionOptions: {
                                enabled: true,
                                threshold: 1200,
                                numDecimalDigits: 2,
                        },
                        offlineDetectionOptions: {
                                numRequests: 5, // Converter is considered offline after this num of failed requests
                                offlineInterval: 1800000, // 30 Minutes
                        },
                        requestTimeout: 1000,
                        broadcastSolarPower: true,
                        broadcastGridPower: true,
                        broadcastBatteryPower: true,
                        dummyData: false,
                },

		{
            		module: 'MMM-EnergyMonitor',
			disabled: false,
            		position: 'middle_center',
			hidden: false,
       			updateInterval: 3000,
        		energyStorage: false,
        		width: "100px",
        		height: "100px",
        		lineWidth: "8px",
        		resetCycles: 3,
        		logNotifications: false,
			wattConversionOptions: {
           			enabled: true,
            			threshold: 1200,
            			numDecimalDigits: 2,
        		},
        		iconCssClasses: {
            			home: "fas fa-home",
            			grid: "fas fa-plug",
            			energyStorage: "fas fa-battery-half",
            			localPowerSource: "fas fa-solar-panel",
        		}
        	},
		
		{
			module: "compliments",
			disabled: true,
			position: "lower_third"
		},
		{
			module: "weather",
			position: "top_right",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "Fawkner, AU",
				locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "7e845e5fc36ce2a73900ec4152ca884c"
			}
		},
		{
			module: "weather",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "Fawkner, AU",
				locationID: "2166819", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "7e845e5fc36ce2a73900ec4152ca884c"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}