MMM-Netatmo updated

Mitch_66

@Laz
Will do but you’ll need to wait a bit. Currently far away from home, back in a week

Mitch_66

@Laz
Here’s my config that works. The name for the rooms in Netatmo are as specified in the Netatmo App. It’s a quite ‘old’ Netatmo module, talking about 8 years or so hence for sure not the latest hardware.

            {
                    module: 'MMM-Netatmo',
                    disabled: false,
                    position: 'bottom_bar', // the location where the module should be displayed
                    header: 'Netatmo',
                    config: {
                            clientId: 'clientID', // your app id
                            clientSecret: 'clientSecret', // your app secret
                            refreshToken: 'refresh|token', // your generated refresh token
                            accessToken: 'access|token',
                            location: "germany/badenwurttemberg/stuttgart-arnulf-klett-platz",  //for AirQuality
                            updateIntervalAirQuality: 300, // in secondes = every 30 minutes
                            updatesIntervalDisplay: 60, //refresh internal
                            lastMessageThreshold: 600, // in seconds (10 minutes)
                            horizontal: true,
                            horizontalOverflow: false,
                            windUnit: "KMH",
                            showLastMessage: true,
                            showDataIcon: true,
                            showDataHeader: true,
                            showModuleStatus: true,
                            showModuleFirmware: true,
                            refreshInterval: 3,
                            moduleOrder: ["Wohnzimmer", "Schlafzimmer", "Terrasse" ],
                    }
            },

Laz

@Mitch_66
Thank you!
I’ll try to check. Unfortunately, I have already left the city where my MM is standing. I will try through VNC access.

Laz

@Mitch_66
Good afternoon!
Do you use what module of Netatmo of the author?
I use the module from CFenner
In July the module ceased to become authorized. In August the author finished it, but after completion (some files were replaced), at restart of a mirror all modules ceased to be started. If to rename the folder of the module of Netatmo, then other modules are started.

I tried to return the kept folder of the module of their archive, with the old version of this module all other modules are started. Except the module of Netatmo. I tried also your config (with my data), but all the same the module isn’t started… (((

Mitch_66

@Laz
Nope, using this one: https://github.com/RaymondMolenaar/MMM-Netatmo/blob/master/README.md

Couldn‘t make the Renner module work again. Good luck!

Laz

@Mitch_66 said in MMM-Netatmo updated:

@Laz

Couldn‘t make the Renner module work again. Good luck!

And what is this “Rener module”?

Mitch_66

@Laz Auto-correction at work - the CFenner module

Laz

@Mitch_66
Unfortunately, I did not understand your answer… (
What does “autocorrection” mean…?

sdetweil

@Laz phone auto correction, changing the text you type to what it thinks is the right word

Laz

@sdetweil
Thank you ))
When I sent the message, I already understood))
But you can only delete it when it is published… (