MMM-Netatmo updated

[Laz]

@Mitch_66
Thank you!
I’ll try to check. Unfortunately, I have already left the city where my MM is standing. I will try through VNC access.

[Laz]

@Mitch_66
Good afternoon!
Do you use what module of Netatmo of the author?
I use the module from CFenner
In July the module ceased to become authorized. In August the author finished it, but after completion (some files were replaced), at restart of a mirror all modules ceased to be started. If to rename the folder of the module of Netatmo, then other modules are started.

I tried to return the kept folder of the module of their archive, with the old version of this module all other modules are started. Except the module of Netatmo. I tried also your config (with my data), but all the same the module isn’t started… (((

[Mitch_66]

@Laz
Nope, using this one: https://github.com/RaymondMolenaar/MMM-Netatmo/blob/master/README.md

Couldn‘t make the Renner module work again. Good luck!

[Laz]

@Mitch_66 said in MMM-Netatmo updated:

@Laz

Couldn‘t make the Renner module work again. Good luck!

And what is this “Rener module”?

[Mitch_66]

@Laz Auto-correction at work - the CFenner module

[Laz]

@Mitch_66
Unfortunately, I did not understand your answer… (
What does “autocorrection” mean…?

[sdetweil]

@Laz phone auto correction, changing the text you type to what it thinks is the right word

[Laz]

@sdetweil
Thank you ))
When I sent the message, I already understood))
But you can only delete it when it is published… (