Sonos Module

[Atreo]

Hi Guys.

Hope that some of you can help me.
I have problems with my sonos module,
On the mirror it`s only saying loading music.
On my pi i get
Sonos Update
Failure Error: Connect Econnrefused 192.168.0.79

I can access 192.168.0.79:5005 and change song and change volym and so on.
Any ide why i can’t get any information on my mirror ???

Kind regards

Jonas

[Snille]

Hi @Atreo do you have the http-sonos-api installed on your mirror or on another device?
I had problems before I ran on a raspberry Pi when I ran the mirror in Server mode. Don’t know why though. :)

[Atreo]

Hi @Snille Thx for the reply.

Yes i have sonos-http-api installed on my mirror,
This is making me crazy, i like the ide to have the information on the mirror.
Banging my head against the wall…

[Wedee]

I have the Sonos mod running on my Mirror. I get the same thing when I run more than one speaker as a group. If I run each speaker as separate it will load each speaker fine. I haven’t bothered looking into it much as I rarely use the speakers in group mode…

[Atreo]

Thx for the info @Wedee, I only have one and i am stuck… = /
Any one have any tips ?

[Snille]

@Atreo Do you get the “zones” up if you do: http://192.168.0.79:5005/zones ?
You should get a list of all the zones and stuff. :)

[Atreo]

@Snille Yes i can my kitchen zone and i hole lot information what the sonos is playing.

[Snille]

@Atreo Hmm… Then it should be all good. Can you post your “MMM-Sonos” part of the config?

[Snille]

@Atreo This is my “MMM-Sonos” config part…

		{
			module: "MMM-Sonos",
			header: "Spelas på SONOS",
			position: "top_center",
			classes: "",
			config: {
				// The API is not om my RPi. It's on another server...
				apiBase: "http://ip-of-the-api",
				apiPort: 5005,
				showAlbumArt: true,
				showRoomName: true,
				showPausedZone: false,
				showStoppedRoom: false,
				preRoomText: 'Rum: ',
				preArtistText: 'Artist: ',
				preTrackText: 'Spår: ',
				preTypeText: 'Källa: ',
				animationSpeed: 1000,
				apiEndpoint: "zones",
				exclude: ["Living-Room-SUB"]
			}
		},

[Atreo]

@Snille Thx. I will check your setting vs my.

Trevligt att du har det på svenska = )
Tack återkommer strax

[Snille]

@Atreo Hehe, yes. But let’s keep it to English anyway. :)
You are using my “fork” of the “MMM-Sonos” right, if not some of the config-stuff will not work. :)
This is my fork: https://github.com/Snille/MMM-Sonos

[Dicous]

Can someone please share a working config? Please ^^

My following does not work:

module: 'MMM-Sonos',
	header: "Playing on SONOS",
	position: "top_left", 
	classes: "default everyone",
	config: {
				apiBase: "http://localhost",
				apiPort: 5005,
				showAlbumArt: true,
				showRoomName: true,
				showPausedZone: false,
				showStoppedRoom: false,
				preRoomText: 'Raum: ',
				preArtistText: 'Artist: ',
				preTrackText: 'Lied: ',
				preTypeText: 'Quelle: ',
				animationSpeed: 1000,
				apiEndpoint: "zones",
				exclude: []
				}

[Snille]

@Dicous What happens, what does not work?

[Dicous]

There is always the “Loading music …”

[Snille]

@Dicous Do you get the “zones” when you check the sonos-web-api? If you have it on the mirror: http://the-ip-to-your-mirror:5005/zones
You should get a list of all the zones and lot’s of data from the sonos-web-api.

[thymon]

This post is deleted!

[luisestrada]

This post is deleted!

[Thorn2910]

I had exactly the same issue!

MMM-Sonos Version v.0.0.1 released beginning of 2024

Chnged in MMM-Sonos.js th following part
from

apiBase: 'http://localhost',

to

apiBase: 'http://192.168.1.22',

Obviously change the IP addess accordingly

For additional info my MMM-Sonos part config.js in /MagicMirror/config/config.js

 {
                        module: 'MMM-Sonos',
                        //header: "Sonos",
                        position: 'top_center', // you may choose any location
                        config: {
                                                showStoppedRoom: false,
                                                albumArtLocation: "left",
                                }
                },

then it worked! With http://localhost I always got

[ERROR] Failure: Error: connect ECONNREFUSED ::1:5005

in the logs