Problem with MMM-ValuesByNotification and MMM-CommandToNotification

[Jimmy1502]

@sdetweil No sadly not, still getting “timeout”. I try to implement the codewrapper. Im new to this sry.

[sdetweil]

@Jimmy1502 said in Problem with MMM-ValuesByNotification and MMM-CommandToNotification:

I try to implement the codewrapper. Im new to this sry.

np, we all learn about it…

[wishmaster270]

@Jimmy1502 Hi and thanks to @sdetweil for trying to help.

I will try to update the readme of the module in the next days.

The timeout is set in milliseconds. Your config looks like it is set to 5ms. The script will not be able to respond in this time.
Please increase it to a value much higher especially for the dht sensor. Let’s say something like 1000ms.

[Jimmy1502]

@wishmaster270 Hi! This explains the “Timeout” and i changed it. But now i just gut “0.00” as values. Do i have other mistakes in the code? Can i use all GPIO Pins or just special ones? I tried 18,21,25.

[wishmaster270]

@Jimmy1502
The script uses GPIO 4 in default but accepts any GPIO number as first argument.
At least GPIO 25 has no double function on raspberries and should work.

You can call the script directly in the shell and check the output for debug purposes.
And make sure to check the comments in the first lines of the script if you need to. install any dependencies.

Edit: Looks like you use GPIO 12 in your config which should work, too

[Jimmy1502]

@wishmaster270 this advice really helped. I tried using the script and saw, that the adafruit library was outdated. Updated it and now it kinda works. The script and my sensor is working. I get good reasonable values if i use the script manually. But the Mirror is kinda weird.
When i measured the temperature manually it said sth. around 21°C but ValuesByNotification outputs: “NaN” so Not a Number?
Humidity is kinda working. The majority of the time it is giving me a value of 47%rH but sometimes after the module is blinking (I think it is refreshing), it suddenly changes to 0.00%rH. But the next blink changes it back to a real value.

Thx for your help

[Jimmy1502]

@wishmaster270 Oh i could sworn i just submitted sth. but i cant see it in the notifications…

Well for a second time:

It kinda works now. I tried using the script as u said manually and the dependencies (adafruit library) wasnt up to date. I got reasonable outputs.
But the ValuesByNotification Module isnt working as intended. I Just get a “NaN” (“not a number”?) for the temperature. The Humidity is kinda working giving me a reasonable output. But sometimes after a blink (i think a refresh?), the value changes to “0.00%rH” but after another one it is good again.

[sdetweil]

@Jimmy1502 all.posts for users with reputation below 2 are reviewed by me before posting.

so… sometimes you have to wait til i get back to the forum

you can see your pendkngmpodts.in tye pending queue under your user icon top right

[Jimmy1502]

@sdetweil i have seen thath. But usually it shows me in the notifications that its not approved yet. But i couldnt find it. Thats why i was confused.

[sdetweil]

@Jimmy1502 I have seen the pending g list be empty when it’s not. maybe your side has the same problem