Are you tired of editing config.js, or have trouble doing it, see my new module

[SteakExpert]

Any chance this is still being worked on? Read through this entire thread in hopes I’d be able to solve my problem without bugging (see what I did there?) you, but alas, I did not.

Simply returning the “builder encountered a problem, see MagicMirror messages for info” when I navigate via the QR code.

Would appreciate any help you might be able to supply.

Thank you!

[sdetweil]

@SteakExpert yes , so you need to look in the output of npm start

[SteakExpert]

@sdetweil The only feedback it produces is:

[WARN] You're using a full whitelist configuration allow for all IPs

[sdetweil]

@SteakExpert are you using pm2?

if so, pm2 logs --lines=xxx

xxx is the most recent lines

there should be a lot more output

[sdetweil]

@SteakExpert this is my startup

(base) sam@sams:~/MagicMirror.old$ npm start 

> magicmirror@2.31.0-develop start
> npm run start:x11


> magicmirror@2.31.0-develop start:x11
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[2025-01-03 17:46:17.197] [LOG]   Starting MagicMirror: v2.31.0-develop 
[2025-01-03 17:46:17.209] [LOG]   Loading config ... 
[2025-01-03 17:46:17.209] [LOG]   config template file not exists, no envsubst 
[2025-01-03 17:46:17.348] [INFO]  Checking config file /home/sam/MagicMirror.old/config/config.js ... 
[2025-01-03 17:46:17.382] [INFO]  Your configuration file doesn't contain syntax errors :) 
[2025-01-03 17:46:17.382] [INFO]  Checking modules structure configuration ... 
[2025-01-03 17:46:17.409] [INFO]  Your modules structure configuration doesn't contain errors :) 
[2025-01-03 17:46:17.409] [LOG]   Loading module helpers ... 
[2025-01-03 17:46:17.462] [LOG]   Initializing new module helper ... 
[2025-01-03 17:46:17.463] [LOG]   Module helper loaded: MMM-Wallpaper 
[2025-01-03 17:46:17.463] [LOG]   No helper found for module: clock. 
[2025-01-03 17:46:17.463] [LOG]   Initializing new module helper ... 
[2025-01-03 17:46:17.463] [LOG]   Module helper loaded: MMM-EmbedURL 
[2025-01-03 17:46:17.527] [LOG]   Initializing new module helper ... 
[2025-01-03 17:46:17.527] [LOG]   Module helper loaded: MMM-Config 
[2025-01-03 17:46:17.534] [LOG]   Initializing new module helper ... 
[2025-01-03 17:46:17.534] [LOG]   Module helper loaded: MMM-HomeAssistantDisplay 
[2025-01-03 17:46:17.534] [LOG]   No helper found for module: MMM-CalendarExt3. 
[2025-01-03 17:46:17.534] [LOG]   No helper found for module: MMM-page-indicator. 
[2025-01-03 17:46:17.535] [LOG]   init module helper SampleModule 
[2025-01-03 17:46:17.535] [LOG]   Module helper loaded: SampleModule 
[2025-01-03 17:46:17.535] [LOG]   No helper found for module: MMM-pages. 
[2025-01-03 17:46:17.572] [LOG]   Initializing new module helper ... 
[2025-01-03 17:46:17.572] [LOG]   Module helper loaded: calendar 
[2025-01-03 17:46:17.572] [LOG]   All module helpers loaded. 
[2025-01-03 17:46:17.574] [LOG]   Starting server on port 8090 ...  
[2025-01-03 17:46:17.575] [WARN]  You're using a full whitelist configuration to allow for all IPs 
[2025-01-03 17:46:17.867] [LOG]   Server started ... 
[2025-01-03 17:46:17.867] [LOG]   Connecting socket for: MMM-Wallpaper 
[2025-01-03 17:46:17.867] [LOG]   Starting node helper for: MMM-Wallpaper 
[2025-01-03 17:46:17.867] [LOG]   Connecting socket for: MMM-EmbedURL 
[2025-01-03 17:46:17.867] [LOG]   Connecting socket for: MMM-Config 
[2025-01-03 17:46:17.868] [INFO]  MMM-Config restart parm ='none' 
[2025-01-03 17:46:17.868] [LOG]   command =/home/sam/MagicMirror.old/modules/MMM-Config/test_convert.sh override 
[2025-01-03 17:46:17.868] [LOG]   Starting module helper:MMM-Config 
[2025-01-03 17:46:17.868] [LOG]   execing /home/sam/MagicMirror.old/modules/MMM-Config/test_convert.sh override 
[2025-01-03 17:46:17.875] [LOG]   Connecting socket for: MMM-HomeAssistantDisplay 
[2025-01-03 17:46:17.875] [LOG]   Connecting socket for: SampleModule 
[2025-01-03 17:46:17.875] [LOG]   Starting module helper:SampleModule 
[2025-01-03 17:46:17.876] [LOG]   Connecting socket for: calendar 
[2025-01-03 17:46:17.876] [LOG]   Starting node helper for: calendar 
[2025-01-03 17:46:17.876] [LOG]   Sockets connected & modules started ... 
[2025-01-03 17:46:17.876] [LOG]    got port=8300 
[2025-01-03 17:46:18.047] [LOG]   Launching application. 
[2025-01-03 17:46:18.224] [INFO]  System information:
### SYSTEM:   manufacturer: System manufacturer; model: System Product Name; virtual: false
### OS:       platform: linux; distro: Ubuntu; release: 22.04.5 LTS; arch: x64; kernel: 5.15.0-125-generic
### VERSIONS: electron: 32.2.7; used node: 20.18.1; installed node: 20.18.1; npm: 10.8.2; pm2: 5.4.3
### OTHER:    timeZone: America/Chicago; ELECTRON_ENABLE_GPU: undefined 
[3484285:0103/174618.683913:ERROR:nss_util.cc(345)] After loading Root Certs, loaded==false: NSS error code: -8018
[2025-01-03 17:46:18.707] [ERROR] (node:3484285) electron: Failed to load URL: https://dummy:3000/temperaturen?orgId=2&from=1666840963687&to=1666862563687&panelId=6 with error: ERR_NAME_NOT_RESOLVED
(Use `electron --trace-warnings ...` to show where the warning was created) 
[2025-01-03 17:46:18.708] [ERROR] (node:3484285) electron: Failed to load URL: https://dummy:3000/temperaturen?orgId=2&from=1666840776401&to=1666862376402&panelId=2 with error: ERR_NAME_NOT_RESOLVED 
[2025-01-03 17:46:18.711] [ERROR] (node:3484285) electron: Failed to load URL: https://dummy:3000/temperaturen?orgId=2&from=1666840667772&to=1666862267772&panelId=4 with error: ERR_NAME_NOT_RESOLVED 
[2025-01-03 17:46:18.799] [INFO]  [MMM-HomeAssistantDisplay] [ 'HomeAssistant connected for module_13_MMM-HomeAssistantDisplay' ] 
[2025-01-03 17:46:18.830] [INFO]  [MMM-HomeAssistantDisplay] [ 'HomeAssistant connected for module_7_MMM-HomeAssistantDisplay' ] 
[2025-01-03 17:46:18.833] [LOG]   Create new calendarfetcher for url: https://ics.calendarlabs.com/76/mm3137/US_Holidays.ics - Interval: 120000 
[2025-01-03 17:46:18.834] [LOG]   Create new calendarfetcher for url: https://calendar.google.com/calendar/ical/sdetweil%40gmail.com/private-b01395933cda72021e36fae98c07a186/basic.ics - Interval: 120000 
[2025-01-03 17:46:18.834] [LOG]   SampleModule received a socket notification: CONFIG - Payload: [object Object] 
[2025-01-03 17:46:18.844] [ERROR] (node:3484285) electron: Failed to load URL: https://dummy:3000/temperaturen?orgId=2&from=1666840667772&to=1666862267772&panelId=4 with error: ERR_NAME_NOT_RESOLVED 
[2025-01-03 17:46:18.862] [INFO]  [MMM-HomeAssistantDisplay] [
  'Conected to Home Assistant for module_13_MMM-HomeAssistantDisplay after 0 retries'
] 
[2025-01-03 17:46:18.865] [INFO]  [MMM-HomeAssistantDisplay] [
  'Conected to Home Assistant for module_7_MMM-HomeAssistantDisplay after 0 retries'
] 
[2025-01-03 17:46:18.873] [LOG]   connection started = connect 
[2025-01-03 17:46:18.874] [LOG]   path=/home/sam/MagicMirror.old/modules/MMM-Config/schema3_16467085098090.json 
[2025-01-03 17:46:19.102] [INFO]  Calendar-Fetcher: Broadcasting 25 events from https://ics.calendarlabs.com/76/mm3137/US_Holidays.ics. 
[2025-01-03 17:46:19.635] [INFO]  Calendar-Fetcher: Broadcasting 156 events from https://calendar.google.com/calendar/ical/6/basic.ics. 
[2025-01-03 17:46:20.749] [LOG]   stdout: completed

I have MMM-Config debug enabled

[sdetweil]

@SteakExpert said in Are you tired of editing config.js, or have trouble doing it, see my new module:

“builder encountered a problem, see MagicMirror messages for info”

yeh, that message was put there to tell you what to do instead of being dead

that means the error trap worked…

[SteakExpert]

@sdetweil Just emailed you the log! Thanks, Sam.

[sdetweil]

@SteakExpert there is more after that that I need…

[sdetweil]

@SteakExpert we are looking for content in the MagicMirror runtime messages (from npm start ) that might look like this (forced an error just to get the content)

 [LOG]   stdout: --------------------MMM-Config
module MMM-Carousel has an error in the construction of its defaults section
the error line is     transitionTimeout: somevalue,
please change it to the literal value of the referenced defaults variable
and restart MagicMirror
--------------------MMM-Config

the browser message is the last part setup of the error handler

[DarkV]

I am a noob at this, how do I set the port to use the browser and how do I show the QR code on my MM?