MMM-CalendarExt3 and MMM-MonthlyCalendar blank

[sdetweil]

@Scott-M note this latest fix also changes MagicMirror.sh to detect which window manager is running (wayland or labwc) and use the different start command if detected

[Scott-M]

@sdetweil
I probably did add the code block after. Lesson learned! And this is partly why I am having more issues with this. It has been very frustating, after it worked last night, it isn’t now.

I think I know what the issue is but it is time consuming writing the SD image and running the script so if you can bear with me. I want to test it at least twice before I update here.

I suspect the 2 dashes before

--force-confdef
--force-confnew

have been replaced by a single dash of a different character type. Again, because I put the code block around the text after I copied it.

This should be the correct code but let me test again to make sure. It has worked once, just want to do it again and will update.

sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confnew" full-upgrade

In the mean time, the above code will auto select the default option if one is available and then answer Yes if there is no default. In the case of the prompt that was appearing, the old configuration file ‘/etc/xdg/labwc-greeter/autostart’ is kept. If you want the package maintainers file instead just remove the first option:

-o Dpkg::Options::="--force-confdef"

[sdetweil]

@Scott-M yes the double dash was replaced with single… new update pushed…

[Scott-M]

@sdetweil

It seemed to get through the upgrade stage very quickly and

apt-get upgrade  started
apt-get upgrade result =rc=0 Reading package lists...
Building dependency tree...

in the log seems to show the upgrade didn’t work. I will run the script locally on the pi and send the output to the termnial to see what is happening but it won’t be tonight, I have to go out now.

Update tomorrow…

[Scott-M]

@sdetweil

MagicMirror did run though…

[Scott-M]

@sdetweil
So, I have tried the following, each on a freshlly flashed OS.

1 - Copied

sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confnew" full-upgrade

directly from the raspberry.sh script, updated and then upgraded using the above and it worked.

2 - Modified the script as below and ran it locally so I can see the output in terminal during the upgrade part, and it worked, no errors durring the upgrade. And Magic Mirror Ran successfully.

	if [ $upgrade -eq $true ]; then
	   sudo apt-get install pv -y >>$logfile
	   echo "apt-get upgrade  started" >> $logfile
	   sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confnew" full-upgrade | tee -a $logfile
	   #upgrade_result=$(sudo apt-get -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confnew" full-upgrade | pv -l -p)
	   #upgrade_result=$(sudo apt-get --assume-yes full-upgrade  2>&1 | pv -l -p)
		 #upgrade_rc=$?
		 #echo apt-get upgrade result ="rc=$upgrade_rc $upgrade_result" >> $logfile
	fi

3 - Copied your raspberry.sh script to the home directory unmodified and ran it locally and it also works. Log file still reads

apt-get upgrade result =rc=0

But it worked, is the what you would expect in the log?

4 - Run the script again directly using.

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/v231/raspberry.sh)"

This works and the log file reads the same

apt-get upgrade result =rc=0

Running apg-get full-upgrade again show that there is nothing new to do.

Bottom line, it works!

Attempt no 2 running the modified script locally, the whole upgrade output went to the log file.

[sdetweil]

@Scott-M thanks. pv is a tool for showing progress on the commandline

it shows <=>
moving left to right or right to left as output goes thru

i put it in because others said they didnt know if it was still working or hung

ill make changes, new release coming

[sdetweil]

@Scott-M said in MMM-CalendarExt3 and MMM-MonthlyCalendar blank:

sudo apt-get -y -o Dpkg::Options::=“–force-confdef” -o Dpkg::Options::=“–force-confnew” full-upgrade | tee -a $logfile

updated script, removed pv , give it a try if you have time

[Scott-M]

@sdetweil

All good, works fine.

[sdetweil]

@Scott-M woohoo… thanks…