V2.31.0 unable to start

[htilburgs]

@sdetweil
I did the update, it didn’t work afterwards.
Then I’ve tried sudo apt-get update / upgrade, still no luck
Today I renamed MagicMirror to .org and did a new install of MagicMirror, same result.

So now I’m out of options…

[sdetweil]

@htilburgs hmm

ok. try this

rm -rf ~/.config/Electron

note the . (dot) in front of of config

restart MagicMirror

[htilburgs]

@sdetweil
Same error😔

npm run start
npm run start:wayland

[htilburgs]

I think I take a new SD Card and do an install from scratch to see what happens.

[htilburgs]

@htilburgs
I took a new SD Card and installed everything from fresh.
Some information:

cat /sys/firmware/devicetree/base/model
Raspberry Pi 4 Model B Rev 1.4

cat /etc/debian_version
12.10

cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

uname -a
Linux MagicMirror 6.12.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.20-1+rpt1~bpo12+1 (2025-03-19) aarch64 GNU/Linux

node -v
v22.14.0

npm -v
10.9.2

When I start MagicMirror with “npm run start”, then everything seems to work.

pm2 start MagicMirror works and seems to start MagicMirror in Wayland

npm run start:wayland still gives an error

pi@MagicMirror:~/MagicMirror $ npm run start:wayland

> magicmirror@2.31.0 start:wayland
> WAYLAND_DISPLAY="${WAYLAND_DISPLAY:=wayland-1}" ./node_modules/.bin/electron js/electron.js --enable-features=UseOzonePlatform --ozone-platform=wayland

[2025-04-15 21:25:47.140] [LOG]   Starting MagicMirror: v2.31.0 
[2025-04-15 21:25:47.175] [LOG]   Loading config ... 
[2025-04-15 21:25:47.179] [LOG]   config template file not exists, no envsubst 
[2025-04-15 21:25:47.752] [INFO]  Checking config file /home/pi/MagicMirror/config/config.js ... 
[2025-04-15 21:25:47.874] [INFO]  Your configuration file doesn't contain syntax errors :) 
[2025-04-15 21:25:47.876] [INFO]  Checking modules structure configuration ... 
[2025-04-15 21:25:47.988] [INFO]  Your modules structure configuration doesn't contain errors :) 
[2025-04-15 21:25:47.991] [LOG]   Loading module helpers ... 
[2025-04-15 21:25:47.992] [LOG]   No helper found for module: alert. 
[2025-04-15 21:25:48.002] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.004] [LOG]   Module helper loaded: updatenotification 
[2025-04-15 21:25:48.004] [LOG]   No helper found for module: clock. 
[2025-04-15 21:25:48.005] [LOG]   No helper found for module: MMM-CalendarExt3Agenda. 
[2025-04-15 21:25:48.005] [LOG]   No helper found for module: weather. 
[2025-04-15 21:25:48.061] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.061] [LOG]   Module helper loaded: MMM-Formula1 
[2025-04-15 21:25:48.099] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.100] [LOG]   Module helper loaded: MMM-MyGarbage 
[2025-04-15 21:25:48.225] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.225] [LOG]   Module helper loaded: calendar 
[2025-04-15 21:25:48.270] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.271] [LOG]   Module helper loaded: MMM-OnSpotify 
[2025-04-15 21:25:48.298] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.298] [LOG]   Module helper loaded: MMM-Bring 
[2025-04-15 21:25:48.487] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.487] [LOG]   Module helper loaded: MMM-Tado 
[2025-04-15 21:25:48.489] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.489] [LOG]   Module helper loaded: MMM-MyHomeWizard 
[2025-04-15 21:25:48.491] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.492] [LOG]   Module helper loaded: MMM-SystemMonitor 
[2025-04-15 21:25:48.523] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.523] [LOG]   Module helper loaded: MMM-network-signal 
[2025-04-15 21:25:48.525] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.526] [LOG]   Module helper loaded: MMM-Universal-Pir 
[2025-04-15 21:25:48.526] [LOG]   All module helpers loaded. 
[2025-04-15 21:25:48.536] [LOG]   Starting server on port 8080 ...  
[2025-04-15 21:25:49.396] [LOG]   Server started ... 
[2025-04-15 21:25:49.401] [LOG]   Connecting socket for: updatenotification 
[2025-04-15 21:25:49.407] [LOG]   Starting module helper: updatenotification 
[2025-04-15 21:25:49.409] [LOG]   Connecting socket for: MMM-Formula1 
[2025-04-15 21:25:49.414] [LOG]   Starting module: MMM-Formula1 
[2025-04-15 21:25:49.418] [LOG]   Connecting socket for: MMM-MyGarbage 
[2025-04-15 21:25:49.419] [LOG]   Starting node_helper for module: MMM-MyGarbage 
[2025-04-15 21:25:49.420] [LOG]   Connecting socket for: calendar 
[2025-04-15 21:25:49.422] [LOG]   Starting node helper for: calendar 
[2025-04-15 21:25:49.424] [LOG]   Connecting socket for: MMM-OnSpotify 
[2025-04-15 21:25:49.427] [LOG]   [MMM-OnSpotify] by Fabrizz >> Node helper loaded. 
[2025-04-15 21:25:49.428] [LOG]   Connecting socket for: MMM-Bring 
[2025-04-15 21:25:49.430] [LOG]   Connecting socket for: MMM-Tado 
[2025-04-15 21:25:49.438] [LOG]       - MMM-Tado: Refresh token loaded. 
[2025-04-15 21:25:49.440] [LOG]   Connecting socket for: MMM-MyHomeWizard 
[2025-04-15 21:25:49.443] [LOG]   Starting node_helper for: MMM-MyHomeWizard 
[2025-04-15 21:25:49.444] [LOG]   Connecting socket for: MMM-SystemMonitor 
[2025-04-15 21:25:49.446] [LOG]   Starting module helper: MMM-SystemMonitor 
[2025-04-15 21:25:49.450] [LOG]   Connecting socket for: MMM-network-signal 
[2025-04-15 21:25:49.452] [LOG]   MMM-network-signal helper started ... 
[2025-04-15 21:25:49.454] [LOG]   Connecting socket for: MMM-Universal-Pir 
[2025-04-15 21:25:49.457] [LOG]   Sockets connected & modules started ... 
[2025-04-15 21:25:50.513] [LOG]   Launching application. 
[2025-04-15 21:25:51.278] [INFO]  System information:
### SYSTEM:   manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.4; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.12.20+rpt-rpi-v8
### VERSIONS: electron: 35.1.5; used node: 22.14.0; installed node: 22.14.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Amsterdam; ELECTRON_ENABLE_GPU: undefined 
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGTRAP
pi@MagicMirror:~/MagicMirror $ 

I was just wondering, couldn’t it have something to do with the WAYLAND_DISPLAY parameter?

 WAYLAND_DISPLAY="${WAYLAND_DISPLAY:=wayland-1

[sdetweil]

@htilburgs could be

when you open a terminal session and do

env

is the WAYLAND_DISPLAY variable set?

that code you referenced says use WAYLAND_DISPLAY, and if not set, set it to wayland-1

[htilburgs]

@sdetweil It seems it’s not set

pi@MagicMirror:~ $ env
SHELL=/bin/bash
NO_AT_BRIDGE=1
PWD=/home/pi
LOGNAME=pi
XDG_SESSION_TYPE=tty
MOTD_SHOWN=pam
HOME=/home/pi
LANG=en_GB.UTF-8
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=00:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.avif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:*~=00;90:*#=00;90:*.bak=00;90:*.old=00;90:*.orig=00;90:*.part=00;90:*.rej=00;90:*.swp=00;90:*.tmp=00;90:*.dpkg-dist=00;90:*.dpkg-old=00;90:*.ucf-dist=00;90:*.ucf-new=00;90:*.ucf-old=00;90:*.rpmnew=00;90:*.rpmorig=00;90:*.rpmsave=00;90:
SSH_CONNECTION=192.168.0.200 57994 192.168.0.47 22
XDG_SESSION_CLASS=user
TERM=xterm-256color
USER=pi
SHLVL=1
XDG_SESSION_ID=4
XDG_RUNTIME_DIR=/run/user/1000
SSH_CLIENT=192.168.0.200 57994 22
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
SSH_TTY=/dev/pts/0
OLDPWD=/home/pi/.config
TEXTDOMAIN=Linux-PAM
_=/usr/bin/env
pi@MagicMirror:~ $ 

How do I set this?

[sdetweil]

@htilburgs in terminal window no spaces between things…
this is like the windows set var=value (without the set prefix)

WAYLAND_DISPLAY=wayland-x

x is a number from 0 to …

we thought wayand-1 was default

[htilburgs]

@sdetweil said in V2.31.0 unable to start:

WAYLAND_DISPLAY=wayland-x

In terminal window I typed WAYLAND_DISPLAY=wayland-1
Then I did “env”, nothing changed.
npm run start:wayland still gives the same error.

[sdetweil]

@htilburgs said in V2.31.0 unable to start:

Then I did “env”, nothing changed.

you should have seen this in the env output

but our code says IF NOT SET, use wayland-1
which looks like an error

so if you set it to the same value it won’t improve

I’d try wayland-0

maybe the wlr_randr command will tell you what it is?