V2.31.0 unable to start

htilburgs

@sdetweil said in V2.31.0 unable to start:

ps -ef | grep way
ps -ef | grep labwc

pi@mm:~/MagicMirror $ ps -ef | grep way
vnc          739       1  0 Apr09 ?        00:00:00 /bin/sh /usr/sbin/wayvnc-run.sh
vnc          759     739  0 Apr09 ?        00:00:00 wayvnc --render-cursor --detached --gpu --config /etc/wayvnc/config --socket /tmp/wayvnc/wayvncctl.sock
root        1605       1  0 Apr09 ?        00:02:02 python /usr/sbin/wayvnc-control.py
lightdm   801759  801726  0 19:20 ?        00:00:02 /usr/bin/rpi-connectd -socket /run/user/106/rpi-connect-wayvnc.sock
lightdm   801764  801648  0 19:20 ?        00:00:00 /usr/bin/wayfire -c /usr/share/greeter.ini
pi        810604     974  0 19:24 ?        00:00:02 /usr/bin/rpi-connectd -socket /run/user/1000/rpi-connect-wayvnc.sock
lightdm   870748       1  0 19:32 ?        00:00:00 /usr/bin/Xwayland -auth /home/lightdm/.Xauthority :0 -rootless -core -terminate 10 -listenfd 30 -listenfd 31 -displayfd 59 -wm 56
pi        878864  735951  0 21:00 pts/0    00:00:00 grep --color=auto way

pi@mm:~/MagicMirror $ ps -ef | grep labwc
pi        878897  735951  0 21:00 pts/0    00:00:00 grep --color=auto labwc
pi@mm:~/MagicMirror $

sdetweil

@htilburgs hm. so start:wayland should have worked

htilburgs

@sdetweil
I did the update, it didn’t work afterwards.
Then I’ve tried sudo apt-get update / upgrade, still no luck
Today I renamed MagicMirror to .org and did a new install of MagicMirror, same result.

So now I’m out of options…

sdetweil

@htilburgs hmm

ok. try this

rm -rf ~/.config/Electron

note the . (dot) in front of of config

restart MagicMirror

htilburgs

@sdetweil
Same error😔

npm run start
npm run start:wayland

htilburgs

I think I take a new SD Card and do an install from scratch to see what happens.

htilburgs

@htilburgs
I took a new SD Card and installed everything from fresh.
Some information:

cat /sys/firmware/devicetree/base/model
Raspberry Pi 4 Model B Rev 1.4

cat /etc/debian_version
12.10

cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

uname -a
Linux MagicMirror 6.12.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.20-1+rpt1~bpo12+1 (2025-03-19) aarch64 GNU/Linux

node -v
v22.14.0

npm -v
10.9.2

When I start MagicMirror with “npm run start”, then everything seems to work.

pm2 start MagicMirror works and seems to start MagicMirror in Wayland

npm run start:wayland still gives an error

pi@MagicMirror:~/MagicMirror $ npm run start:wayland

> magicmirror@2.31.0 start:wayland
> WAYLAND_DISPLAY="${WAYLAND_DISPLAY:=wayland-1}" ./node_modules/.bin/electron js/electron.js --enable-features=UseOzonePlatform --ozone-platform=wayland

[2025-04-15 21:25:47.140] [LOG]   Starting MagicMirror: v2.31.0 
[2025-04-15 21:25:47.175] [LOG]   Loading config ... 
[2025-04-15 21:25:47.179] [LOG]   config template file not exists, no envsubst 
[2025-04-15 21:25:47.752] [INFO]  Checking config file /home/pi/MagicMirror/config/config.js ... 
[2025-04-15 21:25:47.874] [INFO]  Your configuration file doesn't contain syntax errors :) 
[2025-04-15 21:25:47.876] [INFO]  Checking modules structure configuration ... 
[2025-04-15 21:25:47.988] [INFO]  Your modules structure configuration doesn't contain errors :) 
[2025-04-15 21:25:47.991] [LOG]   Loading module helpers ... 
[2025-04-15 21:25:47.992] [LOG]   No helper found for module: alert. 
[2025-04-15 21:25:48.002] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.004] [LOG]   Module helper loaded: updatenotification 
[2025-04-15 21:25:48.004] [LOG]   No helper found for module: clock. 
[2025-04-15 21:25:48.005] [LOG]   No helper found for module: MMM-CalendarExt3Agenda. 
[2025-04-15 21:25:48.005] [LOG]   No helper found for module: weather. 
[2025-04-15 21:25:48.061] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.061] [LOG]   Module helper loaded: MMM-Formula1 
[2025-04-15 21:25:48.099] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.100] [LOG]   Module helper loaded: MMM-MyGarbage 
[2025-04-15 21:25:48.225] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.225] [LOG]   Module helper loaded: calendar 
[2025-04-15 21:25:48.270] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.271] [LOG]   Module helper loaded: MMM-OnSpotify 
[2025-04-15 21:25:48.298] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.298] [LOG]   Module helper loaded: MMM-Bring 
[2025-04-15 21:25:48.487] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.487] [LOG]   Module helper loaded: MMM-Tado 
[2025-04-15 21:25:48.489] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.489] [LOG]   Module helper loaded: MMM-MyHomeWizard 
[2025-04-15 21:25:48.491] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.492] [LOG]   Module helper loaded: MMM-SystemMonitor 
[2025-04-15 21:25:48.523] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.523] [LOG]   Module helper loaded: MMM-network-signal 
[2025-04-15 21:25:48.525] [LOG]   Initializing new module helper ... 
[2025-04-15 21:25:48.526] [LOG]   Module helper loaded: MMM-Universal-Pir 
[2025-04-15 21:25:48.526] [LOG]   All module helpers loaded. 
[2025-04-15 21:25:48.536] [LOG]   Starting server on port 8080 ...  
[2025-04-15 21:25:49.396] [LOG]   Server started ... 
[2025-04-15 21:25:49.401] [LOG]   Connecting socket for: updatenotification 
[2025-04-15 21:25:49.407] [LOG]   Starting module helper: updatenotification 
[2025-04-15 21:25:49.409] [LOG]   Connecting socket for: MMM-Formula1 
[2025-04-15 21:25:49.414] [LOG]   Starting module: MMM-Formula1 
[2025-04-15 21:25:49.418] [LOG]   Connecting socket for: MMM-MyGarbage 
[2025-04-15 21:25:49.419] [LOG]   Starting node_helper for module: MMM-MyGarbage 
[2025-04-15 21:25:49.420] [LOG]   Connecting socket for: calendar 
[2025-04-15 21:25:49.422] [LOG]   Starting node helper for: calendar 
[2025-04-15 21:25:49.424] [LOG]   Connecting socket for: MMM-OnSpotify 
[2025-04-15 21:25:49.427] [LOG]   [MMM-OnSpotify] by Fabrizz >> Node helper loaded. 
[2025-04-15 21:25:49.428] [LOG]   Connecting socket for: MMM-Bring 
[2025-04-15 21:25:49.430] [LOG]   Connecting socket for: MMM-Tado 
[2025-04-15 21:25:49.438] [LOG]       - MMM-Tado: Refresh token loaded. 
[2025-04-15 21:25:49.440] [LOG]   Connecting socket for: MMM-MyHomeWizard 
[2025-04-15 21:25:49.443] [LOG]   Starting node_helper for: MMM-MyHomeWizard 
[2025-04-15 21:25:49.444] [LOG]   Connecting socket for: MMM-SystemMonitor 
[2025-04-15 21:25:49.446] [LOG]   Starting module helper: MMM-SystemMonitor 
[2025-04-15 21:25:49.450] [LOG]   Connecting socket for: MMM-network-signal 
[2025-04-15 21:25:49.452] [LOG]   MMM-network-signal helper started ... 
[2025-04-15 21:25:49.454] [LOG]   Connecting socket for: MMM-Universal-Pir 
[2025-04-15 21:25:49.457] [LOG]   Sockets connected & modules started ... 
[2025-04-15 21:25:50.513] [LOG]   Launching application. 
[2025-04-15 21:25:51.278] [INFO]  System information:
### SYSTEM:   manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 4 Model B Rev 1.4; virtual: false
### OS:       platform: linux; distro: Debian GNU/Linux; release: 12; arch: arm64; kernel: 6.12.20+rpt-rpi-v8
### VERSIONS: electron: 35.1.5; used node: 22.14.0; installed node: 22.14.0; npm: 10.9.2; pm2: 5.4.3
### OTHER:    timeZone: Europe/Amsterdam; ELECTRON_ENABLE_GPU: undefined 
/home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGTRAP
pi@MagicMirror:~/MagicMirror $

I was just wondering, couldn’t it have something to do with the WAYLAND_DISPLAY parameter?

 WAYLAND_DISPLAY="${WAYLAND_DISPLAY:=wayland-1

sdetweil

@htilburgs could be

when you open a terminal session and do

env

is the WAYLAND_DISPLAY variable set?

that code you referenced says use WAYLAND_DISPLAY, and if not set, set it to wayland-1

htilburgs

@sdetweil It seems it’s not set

pi@MagicMirror:~ $ env
SHELL=/bin/bash
NO_AT_BRIDGE=1
PWD=/home/pi
LOGNAME=pi
XDG_SESSION_TYPE=tty
MOTD_SHOWN=pam
HOME=/home/pi
LANG=en_GB.UTF-8
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=00:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.avif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:*~=00;90:*#=00;90:*.bak=00;90:*.old=00;90:*.orig=00;90:*.part=00;90:*.rej=00;90:*.swp=00;90:*.tmp=00;90:*.dpkg-dist=00;90:*.dpkg-old=00;90:*.ucf-dist=00;90:*.ucf-new=00;90:*.ucf-old=00;90:*.rpmnew=00;90:*.rpmorig=00;90:*.rpmsave=00;90:
SSH_CONNECTION=192.168.0.200 57994 192.168.0.47 22
XDG_SESSION_CLASS=user
TERM=xterm-256color
USER=pi
SHLVL=1
XDG_SESSION_ID=4
XDG_RUNTIME_DIR=/run/user/1000
SSH_CLIENT=192.168.0.200 57994 22
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
SSH_TTY=/dev/pts/0
OLDPWD=/home/pi/.config
TEXTDOMAIN=Linux-PAM
_=/usr/bin/env
pi@MagicMirror:~ $

How do I set this?

sdetweil

@htilburgs in terminal window no spaces between things…
this is like the windows set var=value (without the set prefix)

WAYLAND_DISPLAY=wayland-x

x is a number from 0 to …

we thought wayand-1 was default

htilburgs

@sdetweil said in V2.31.0 unable to start:

WAYLAND_DISPLAY=wayland-x

In terminal window I typed WAYLAND_DISPLAY=wayland-1
Then I did “env”, nothing changed.
npm run start:wayland still gives the same error.

sdetweil

@htilburgs said in V2.31.0 unable to start:

Then I did “env”, nothing changed.

you should have seen this in the env output

but our code says IF NOT SET, use wayland-1
which looks like an error

so if you set it to the same value it won’t improve

I’d try wayland-0

maybe the wlr_randr command will tell you what it is?

htilburgs

@sdetweil Maybe I don’t understand.
WAYLAND_DISPLAY=wayland-0 still gives wayland-1 in npm run start:wayland.

wlr_randr gives

pi@MagicMirror:~/MagicMirror $ wlr_randr
-bash: wlr_randr: command not found

By the way, my PIR command do work

onCommand: "WAYLAND_DISPLAY='wayland-1' wlr-randr --output HDMI-A-1 --on --transform 270 --mode='1920x1080'",

offCommand: "WAYLAND_DISPLAY='wayland-1' wlr-randr --output HDMI-A-1 --off",

htilburgs

When I give command

pi@MagicMirror:~ $ WAYLAND_DISPLAY='wayland-1' wlr-randr --output HDMI-A-1 
HDMI-A-1 "Samsung Electric Company SyncMaster 0x00000001 (HDMI-A-1)"
  Physical size: 700x390 mm
  Enabled: yes
  Modes:
    720x400 px, 70.082001 Hz
    640x480 px, 59.939999 Hz
    640x480 px, 60.000000 Hz
    640x480 px, 66.667000 Hz
    640x480 px, 72.808998 Hz
    640x480 px, 75.000000 Hz
    720x480 px, 59.939999 Hz
    720x480 px, 59.939999 Hz
    720x480 px, 60.000000 Hz
    720x480 px, 60.000000 Hz
    720x576 px, 50.000000 Hz
    800x600 px, 60.317001 Hz
    800x600 px, 72.188004 Hz
    800x600 px, 75.000000 Hz
    832x624 px, 74.551003 Hz
    1024x768 px, 60.004002 Hz
    1024x768 px, 70.069000 Hz
    1024x768 px, 75.028999 Hz
    1280x720 px, 50.000000 Hz
    1280x720 px, 50.000000 Hz
    1280x720 px, 59.939999 Hz
    1280x720 px, 60.000000 Hz
    1280x720 px, 60.000000 Hz
    1152x864 px, 75.000000 Hz
    1280x800 px, 59.910000 Hz
    1440x900 px, 59.901001 Hz
    1280x1024 px, 60.020000 Hz
    1280x1024 px, 75.025002 Hz
    1600x900 px, 60.000000 Hz
    1680x1050 px, 59.882999 Hz
    1920x1080 px, 23.976000 Hz
    1920x1080 px, 24.000000 Hz
    1920x1080 px, 25.000000 Hz
    1920x1080 px, 29.969999 Hz
    1920x1080 px, 30.000000 Hz
    1920x1080 px, 50.000000 Hz
    1920x1080 px, 50.000000 Hz
    1920x1080 px, 59.939999 Hz
    1920x1080 px, 60.000000 Hz
    1920x1080 px, 60.000000 Hz (preferred, current)
  Position: 0,0
  Transform: 270
  Scale: 1.000000

sdetweil

@htilburgs so wayland-1 seems to be correct

rkorell

@htilburgs said in V2.31.0 unable to start:

-bash: wlr_randr: command not found

shouldn’t it be wlr-randr ?

Regards,
Ralf

htilburgs

@rkorell
You’re correct, but then I get

rkorell

@htilburgs :-)
this is correct on console window.
console didn’t know about display unless you’re telling him what display to use.
As far as I know you can use

DISPLAY=:0.0

as a hint upfront your terminal command.
At least for xrandr this works and is necessary.

DISPLAY=:0.0 xrandr --output HDMI-1 --off

is my xrandr console equivalent for the “normal” command

xrandr --output HDMI-1 --off

I’m not THAT sure if this is true for wlr-randr .
(Because wlr-randr do have this environment variable “WAYLAND_DISPLAY” which is not the case for xrandr…)

HTH & regards,
Ralf

sdetweil

@rkorell xrandr needs DISPLAY

rkorell

@sdetweil yes :-)