ERROR:gbm_wrapper.cc(253) Failed to export buffer to dma_buf: No such file or directory

sdetweil · Nov 13, 2023, 5:51 PM

@rrslssr you can ignore them,

OR add

export ELECTRON_DISABLE_GPU=1

before the npm start line in

~/MagicMirror/installers/mm.sh

rrslssr · Nov 13, 2023, 6:16 PM

@sdetweil said in ERROR:gbm_wrapper.cc(253) Failed to export buffer to dma_buf: No such file or directory:

export ELECTRON_DISABLE_GPU=1

@sdetweil That did not work for those errors, but it did eliminate other errors further down.
I’ll just ignore these.
Thanks

dathbe

@sdetweil

Is this still the right way to address these errors? This is what my ~/MagicMirror/installers/mm.sh file looks like:

#!/bin/bash
cd /home/mmuser/MagicMirror
'''
if [ $(ps -ef | grep -v grep | grep -e wayfire -e labwc | wc -l) -ne 0 ]; then 
   WAYLAND_DISPLAY=wayland-1   
   export ELECTRON_DISABLE_GPU=1
   npm run start:wayland
else
   export ELECTRON_DISABLE_GPU=1
   DISPLAY=:0 npm start
fi 
'''
export ELECTRON_DISABLE_GPU=1
DISPLAY=:0 npm start

And I’m still getting the following errors:

0|mm  | [2154:0415/185345.685943:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.686603:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.689774:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.690194:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.690550:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.690714:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.690957:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.691151:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.692895:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.693152:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.693449:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.693628:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.693878:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.694076:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.694390:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.694612:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.696528:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.696838:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.697254:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.697494:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.697824:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.698209:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.698617:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.698851:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.699185:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.699426:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.699753:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.700002:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.700357:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.700604:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)
0|mm  | [2154:0415/185345.701001:ERROR:gbm_wrapper.cc(79)] Failed to get fd for plane.: No such file or directory (2)
0|mm  | [2154:0415/185345.701225:ERROR:gbm_wrapper.cc(261)] Failed to export buffer to dma_buf: No such file or directory (2)

sdetweil

@dathbe I tried to make it dynamically select, but that didn’t work, so its commented out
‘’’ is a bash block comment

someone posted that npm run start:wayland worked for them to clear those errors…

sdetweil

@dathbe said in ERROR:gbm_wrapper.cc(253) Failed to export buffer to dma_buf: No such file or directory:

export ELECTRON_DISABLE_GPU=1

the default now is disabled…

and the env var has changed to
export ELECTRON_ENABLE_GPU=1
to turn it on

dathbe

@sdetweil
No luck. with DISPLAY=:0 npm start, I get the long list of errors, but everything seems to work ok with the mirror. with

WAYLAND_DISPLAY=wayland-1   
   npm run start:wayland

It throws other errors and gets stuck in what seems to be a restart loop.

0|mm  | [3351:0415/211257.942494:ERROR:wayland_connection.cc(199)] Failed to connect to Wayland display: No such file or directory (2)
0|mm  | [3351:0415/211257.942729:ERROR:ozone_platform_wayland.cc(276)] Failed to initialize Wayland platform
0|mm  | [3351:0415/211257.942774:ERROR:env.cc(257)] The platform failed to initialize.  Exiting.
0|mm  | /home/mmuser/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV

sdetweil

@dathbe yeh, thats what I found too…
maybe its labwc display now?

from the labwc doc,
https://labwc.github.io/labwc-config.5.html

it sounds like DISPLAY is the correct variable

The autostart file is executed as a shell script after labwc has read its configuration and set variables defined in the environment file. Additionally, the environment variables WAYLAND_DISPLAY and (when labwc is built with Xwayland support) DISPLAY will be defined

dathbe

@sdetweil

I tried all three options in raspi-config > Advanced > Wayland (those being 1) X11, 2) Wayfire, and 3) Labwc), and was getting the same error on all of them. I went back to Labwc because my understanding is that is the current recommended.

I’ve tried many different combinations. Anything having to do with start:wayland seems to truly fail and get stuck in a restart loop. npm run start:wayland technically works, but throws about 20 ugly error messages on start.

Various options I’ve tried:

# Work with error messages 
DISPLAY=:0 npm start

export ELECTRON_DISABLE_GPU=1
DISPLAY=:0 npm start

export ELECTRON_ENABLE_GPU=1
DISPLAY=:0 npm start 

# Cause endless start loop

npm run start:wayland

export ELECTRON_DISABLE_GPU=1
npm run start:wayland

export ELECTRON_ENABLE_GPU=1
npm run start:wayland

WAYLAND_DISPLAY=wayland-1
npm run start:wayland

DISPLAY=wayland-1
npm run start:wayland

sdetweil

@dathbe restart loop is pm2, its job is to keep the app running

dathbe

@sdetweil Ok. When I have some time, I’m going to test an install with 32-bit PiOS.