Is adding Home Assistant the right way to go?

British_Kiwi

Hey Sam

Hope you are having a good week! I’m back! I have had a fun week playing with MM and HA and with a few issues with permissions which I finally fixed I am certainly getting there. So have a couple of questions for you (or anyone else reading along)

So my set-up is RPi5 with Bookwork. MM is on there and I have used MMM-pages - first page is things like my calendars, weather etc. Second page is currently my testing page, and am going to put the HA on there.

I have used Docker and Portainer on the RPi for HA. I have created a Dashboard for our solar and batteries etc. I followed the “Home Assistant - Recreate Synergy ‘Home’ Card #184” on here https://github.com/TypQxQ/Sigenergy-Local-Modbus/discussions/184.

I tried to add iFrame which is now read only so tried MMM-iFrame-Ping. As a basic test I tried to display our (Australia) ABC news site and it couldn’t be displayed. I even just tried google in case it couldn’t go in an iFrame and that didn’t pop up either.

I then tried MMM-HomeAssistantDisplay and have managed to get the title Home Assistant up but of course the templates on my code don’t exist, but I wanted to clarify something. For this module, can I display a dashboard, or do I have to build the page with templates. Does each template act like a “card”? I haven’t tried to do anything with templates as yet.

Any pointers? I like the idea of doing both ways, but the first doesn’t work and the second I think I might need to know about templates more.

sdetweil

@British_Kiwi Did you add the iframe statement above to the HA config file? Mentioned in
https://forum.magicmirror.builders/post/128421

I dont have a lot of experience with either approach
I used the sample from HoneAssistantDisplay to build a table of settings

And I just put a dashboard on a pages page w MMM- EmbedUrl
I didn’t size it so it’s just a corner
It didn’t work before adding the iframe stmt to ha config

For the module. I use the programmatic approach
https://github.com/wonderslug/MMM-HomeAssistantDisplay?tab=readme-ov-file#programmatic-sections

Hilt

@British_Kiwi

Try the following :

In your HA configuration.yaml file, include the following

http:
  use_x_frame_options: false

Restart HA first, wait for it to finish, then restart your MM instance to see if the iFrame shows.

If not, give this this older MM module a shot. It’s more straight forward than iFrame Ping and it works with custom button cards ( i use them in my notification area ).

Within HA, you can also make use of the Kiosk Mode HACS add-on to hide the header and/or sidebars. Once installed, you simply add the following at the top of your dashboard YAML using the Raw configuration editor ( this step is shown in the vid ).

kiosk_mode:
  non_admin_settings:
    kiosk: true
    ignore_entity_settings: true

sdetweil

I did have to logon thru the iframe for the dashboard to appear instead of the HA logon panel
the logon persisted across MM startups, at least close in time

the HomeAssistantDisplay module use the api token

British_Kiwi

@sdetweil and @Hilt

I have made progress (sort of). Before when I was testing the various versions of iFrames I hadn’t even tried linking to HA and was using basic websites and just couldn’t see it.

I commented out the HA Display one for now in case it was all throwing a wobbly and I tested that I could access the HA login screen from the monitor using the browser.

I have used this to add an iFrame with the URL for the HA:

           {
			module: 'iFrame',
			position: "fullscreen_above" ,	// This can be any of the regions.
			classes: "testing",
			config: {
				// See 'Configuration options' for more information.
					url: "http://xxx.xxx.xx.xx:8123/",
					width: "100%", // Optional. Default: 100%
					height: "100vh", //Optional. Default: 100px
					border: "1px",
				},
		},

I can now see it, but I cannot get it to fill the page. It is a very thin window at the top. I have tried changing height to 100%, but found something on the forum about vh. I have tried fullscreen, fullscreen_below and other sections and nothing seems to make it particularly big.

The other thing I have noticed is that on my first page “home” my google calendar is missing, or at least the data has gone. I am using MMM-CalendarExt3 and my Todoist (MMM-Todoist2) list has all gone too. the title is there, but no tasks. I had noticed that the calendar and page indicators etc needed updating so I tried that afterwards, but no luck. Is it because I have multiple places using URLs? The calendar has 5 google calendar’s, though the Todoist is using an API.

Apart from that, it is going well 😂

sdetweil

@British_Kiwi you dont want full screen_above, that puts it on top of every other module, hiding them

Try mmm-embedurl, works for me

British_Kiwi

@sdetweil . I’ll try that tomorrow. Just about to head to bed.

I think I might know why I lost my google calendar in the meantime. I had seen there were updates which I had been ignoring, but in the end i updated the calendar, pages and page indicator. I have since seen that the new MM update has impacts on the calendar and looks like my nodjs was an old version. I followed your instructions from here https://forum.magicmirror.builders/topic/19770/nodejs-version-update-issue/2?_=1759892047767 and have updated nodejs to v 22.18, but I still don’t have any calendars showing.

A problem for another night!

sdetweil

@British_Kiwi if you had used the upgrade script it would have been done for you

Nothing in the MagicMirror upgrade should have affected calendar.

sdetweil

@British_Kiwi MagicMirror is a 3 layer design

Full screen_below on the bottom
Module positions. (These will hide parts of fs_below)
Fullscreen_above on top (this will hide anything below it), great for a security panel when no one is around, for example

Hilt

@British_Kiwi

You can also try placing it bottom right and sizing by pixel count, increasing gradually until you reach your monitors full(ish) resolution

I haven’t tried full screen. But one of my configs looks like this :

                {
                        module: "iFrame",
                        position: "bottom_right",
                        header: "HOUSE STATISTICS",
                        config: {
                                url: "http://192.168.1.4:8123/mm-dash-right",
                                        width: "410px",
                                        height: "215px"
                }
                },

If I increase width, the iframe expands to the left. If I increase height, it expands up. Worth a shot.