Raspberry Pi Zero W for Magic Mirror

sdetweil

when you run on a device that doesn’t have electron support, it doesn’t get installed via MM as expected…

then my install script changes the startup to use my run-start.sh script

which launches MagicMirror in server mode
and waits for the ready message

>>>   Ready to go! Please point your browser to: http://0.0.0.0:8080   <<<

and then launches midori like this (with whatever the port number is in the message)

midori http://localhost:8080 -e Fullscreen -e Navigationbar

just for grins can you do

cd ~/MagicMirror
npm start server

to see if that message appears

sdetweil

@funkdafied I think we solved this on discord

Mayank Arora

@sdetweil

I made a magic mirror in my college time using Raspberry pi 3b+

Integrated google assistant with youtube play also in it.

Now i am graduated and doing job from past 2 years, i am thinking to build one for my home.

Raspberry pi 4 and 5 are expensive, does raspberry pi zero works?

Will google assistant work on it? And youtube also will work on it?

If not youtube, will spotify work on it using pi zero

Which raspberry pi zero will you recommend me

sdetweil

@Mayank-Arora you need the pi0-2w at minimum and a fast sd card

The google assistant module is no longer available
Most of the MagicMirror modules for Spotify are display only,
You need the raspotify system service to play ON the PI
YouTube might work, but you have no voice control without GA

roberto84

Hi,

i’m new to magicmirror,but i’m not able to install it on my raspberry pi zero 2w.
What i did:
-Flashed sd with raspberry pi image, choosing the desktop 64 bit version of raspberry pi os
-Inserted sd to raspberry pi zero 2w
-Installed dphys-swapfile to increase swap to 1 gb
-rebooted raspberry pi zero 2w
-Without any apt-update, i just ran the raspberry.sh script from sdetweil repo here
https://github.com/sdetweil/MagicMirror_scripts

Unfortunately,it tooks lot of time installing dependencies,more or less 1 hour, this sometimes cause my wifi connection to drop also, due to high i/o.
Is this a normal scenario?could be this due to a bad sd card?
thanks!

sdetweil

@roberto84 I do not know. I just installed 64 bit on 02w last week. It is fragile due to the low memory and increased swapping

I can get the surf browser up, but it doesn’t update clock tick on seconds

So I think the 32bit image is the only choice, maybe back to legacy

roberto84

@sdetweil thanks for reply!
So at the end ,retrying several times,I was able to install everything with your script.
I installed pm2 also when asked,then I was able to see the default magic mirror display with calendar and so on.
Unfortunately this occurred only first time,then at first reboot ,I see from pm2 logs that everything starts,but what I obtain its only a black screen with no modules loaded…
Those are some error logs on ps2 when I run ps2 Magic mirror start

[4086:0104/075509.190939:ERROR:content/browser/network_service_instance_impl.cc:613] Network service crashed, restarting service.
[4086:0104/075554.525130:ERROR:content/browser/network_service_instance_impl.cc:613] Network service crashed, restarting service.
[1381:0104/082529.351804:ERROR:content/browser/network_service_instance_impl.cc:613] Network service crashed, restarting service.
[1381:0104/082634.504111:ERROR:content/browser/network_service_instance_impl.cc:613] Network service crashed, restarting service.

But at the end it starts as you can notice from out logs

[2026-01-04 08:24:33.145] [LOG] [app] Sockets connected & modules started …
[2026-01-04 08:24:39.175] [LOG] [electron] Launching application.
[2026-01-04 08:26:37.186] [INFO] [utils]

System Information

SYSTEM: manufacturer: Raspberry Pi Foundation; model: Raspberry Pi Zero 2 W Rev 1.0; virtual: false; MM: 2.34.0
OS: platform: linux; distro: Debian GNU/Linux; release: 13; arch: arm64; kernel: 6.12.47+rpt-rpi-v8
VERSIONS: electron: 39.2.7; used node: 22.21.1; installed node: 22.21.1; npm: 10.9.4; pm2: 6.0.14
ENV: XDG_SESSION_TYPE: tty; MM_CONFIG_FILE: undefined
WAYLAND_DISPLAY: wayland-0; DISPLAY: undefined; ELECTRON_ENABLE_GPU: undefined
RAM: total: 416.15 MB; free: 173.97 MB; used: 242.18 MB
OTHERS: uptime: 4 minutes; timeZone: Europe/Rome

this is output of pm2 show MagicMirror

Divergent env variables from local env
┌────────────────┬────────────────────────────────────┐
│ PWD │ /home/pi │
│ SSH_CONNECTION │ 192.168.1.14 47702 192.168.1.27 22 │
│ TERM │ screen.xterm-256color │
│ SHLVL │ 3 │
│ XDG_SESSION_ID │ 16 │
│ SSH_CLIENT │ 192.168.1.14 47702 22 │
└────────────────┴────────────────────────────────────┘

Also ps2 status report MagicMirror online.
One important thing is that I can see MagicMirror contents correctly via the IP on Port 8080
What else can I try?
I also run your fixuppm.sh script ,but nothing changed.
Thanks in advance!

sdetweil

@roberto84

The fixuppm2 script just adds pm2 to start if you didn’t do it at install time

as I said it fragile.

I think you have to try using s smaller browser
Like surf

See the section of the readme at the bottom

But I think the only solution is going back to the 32 bit pi os image