Reverting to previous MM Release

sdetweil

@BKeyport it’s just a name. I picked something, could be anything except master and develop as those are already used

BKeyport

I’ll likely re-work my entire system(s) after tax season is over, but this will hold until then. Once I have time, I’m mulling a few changes that’ll break everything anyway.

mumblebaj

I have just reverted to the old version as well. Too many issues with electron. Breaking issues for me as well. And I am running Pi5 Trixie. Something about Pi5 Trixie and Electron 41 not playing well together. v2.34.0 ran just fine on Trixie and using Wayland. Now it is breaking.

sdetweil

@mumblebaj can you articulate the issues?

mumblebaj

@sdetweil Hi Sam. I upgraded using your upgrade script. Then I saw the following error, /home/pi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGTRAP. MM shows that it has started but browser does not launch, Electron failing. Tried a bunch of things but nothing seems to help. Switched back to X11 and still getting the dreaded error.

I have downgraded to 2.34.0 and still same issue now.

I am flashing a new SD card now and will try a fresh install and see how that goes

sdetweil

@mumblebaj
After downgrading, did you run
npm install again

mumblebaj

@sdetweil Yes sir. Just got in now. Will work on the new SD card now and advise in a bit.

sdetweil

@mumblebaj ok, thx

mumblebaj

@sdetweil Flashed the new card and installed trixie, Did a clean install. Ran your restore script and everything is running just fine.

sdetweil

@mumblebaj woohoo… at least thats something good!!

mumblebaj

@sdetweil For sure. I am suspecting the card may have been flaking. Now to fix my Docker image. 😮‍💨

jca2112

@sdetweil I ran your upgrade script as well and I also see electron errors in the pm2 logs. The system just loads to a blank/black screen (with cursor), but fails to load beyond that.

0|mm  | /home/dietpi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV

sdetweil

@jca2112 when did you run it? today?

can you look at ~/MagicMirror/installers/mm.sh

and see if
npm run start:x11

is present on line 9

also, can you do

pm2 stop all
cd ~/MagicMirror

and try either

npm start

or

npm run start:x11

is this really a dietpi? what OS version is running

lsb_release -a

also, can you send me ~/MagicMirror/installers/upgrade.log
same userid at gmail

jca2112

@jca2112 when did you run it? today?

I ran the script yesterday (04/05/2026).

can you look at ~/MagicMirror/installers/mm.sh

and see if
npm run start:x11

is present on line 9

Here is the mm.sh:

#!/bin/bash
cd /home/dietpi/MagicMirror

if [ $(ps -ef | grep -v grep | grep -i -e xway -e labwc | wc -l) -ne 0 ]; then 
   # if WAYLAND_DISPLAYis set, use it, else set to -0
   export WAYLAND_DISPLAY=${WAYLAND_DISPLAY:=wayland-0}
   npm run start:wayland
else
   DISPLAY=:0 npm start
fi 

#DISPLAY=:0 npm start

also, can you do
pm2 stop all
cd ~/MagicMirror
and try either
npm start 

npm output:

> magicmirror@2.35.0 start
> node --run start:wayland

[2026-04-06 09:08:03.511] [LOG]   [app] Starting MagicMirror: v2.35.0
[2026-04-06 09:08:03.549] [LOG]   [utils] Loading config ...
[2026-04-06 09:08:03.567] [INFO]  [utils] Checking config file /home/dietpi/MagicMirror/config/config.js ...
[2026-04-06 09:08:03.945] [INFO]  [utils] Your configuration file doesn't contain syntax errors :)
[2026-04-06 09:08:03.949] [INFO]  [utils] Checking modules structure configuration ...
[2026-04-06 09:08:04.360] [INFO]  [utils] Your modules structure configuration doesn't contain errors :)
[2026-04-06 09:08:04.369] [LOG]   [app] Loading module helpers ...
[2026-04-06 09:08:04.377] [LOG]   [app] No helper found for module: alert.
[2026-04-06 09:08:04.408] [LOG]   [node_helper] Initializing new module helper ...
[2026-04-06 09:08:04.413] [LOG]   [node_helper] Module helper loaded: updatenotification
[2026-04-06 09:08:04.417] [LOG]   [app] No helper found for module: clock.
[2026-04-06 09:08:05.284] [LOG]   [node_helper] Initializing new module helper ...
[2026-04-06 09:08:05.286] [LOG]   [node_helper] Module helper loaded: calendar
[2026-04-06 09:08:05.297] [LOG]   [node_helper] Initializing new module helper ...
[2026-04-06 09:08:05.300] [LOG]   [node_helper] Module helper loaded: weather
[2026-04-06 09:08:05.615] [LOG]   [node_helper] Initializing new module helper ...
[2026-04-06 09:08:05.619] [LOG]   [node_helper] Module helper loaded: newsfeed
[2026-04-06 09:08:06.334] [INFO]  [systeminformation] 
####  System Information  ####
- SYSTEM:   manufacturer: Raspberry Pi Foundation; model: Raspberry Pi 3 Model B Plus Rev 1.3; virtual: false; MM: v2.35.0
- OS:       platform: linux; distro: Debian GNU/Linux; release: 13; arch: arm64; kernel: 6.12.75+rpt-rpi-v8
- VERSIONS: electron: 41.1.0; used node: 25.2.1; installed node: 25.2.1; npm: 11.6.2; pm2: 6.0.14
- ENV:      XDG_SESSION_TYPE: undefined; MM_CONFIG_FILE: undefined
            WAYLAND_DISPLAY:  wayland-1; DISPLAY: undefined; ELECTRON_ENABLE_GPU: undefined
- RAM:      total: 905.98 MB; free: 524.54 MB; used: 381.45 MB
- OTHERS:   uptime: 1192 minutes; timeZone: America/New_York
[2026-04-06 09:08:06.353] [LOG]   [node_helper] Initializing new module helper ...
[2026-04-06 09:08:06.355] [LOG]   [node_helper] Module helper loaded: MMM-Sonos
[2026-04-06 09:08:06.356] [LOG]   [app] All module helpers loaded.
[2026-04-06 09:08:06.385] [LOG]   [server] Starting server on port 8080 ... 
[2026-04-06 09:08:06.415] [ERROR] [unknown] (node:605210) [DEP0040] DeprecationWarning: The `punycode` module is deprecated. Please use a userland alternative instead.
(Use `electron --trace-deprecation ...` to show where the warning was created)
[2026-04-06 09:08:06.477] [LOG]   [app] Server started ...
[2026-04-06 09:08:06.480] [LOG]   [node_helper] Connecting socket for: updatenotification
[2026-04-06 09:08:06.481] [LOG]   [node_helper] Starting module helper: updatenotification
[2026-04-06 09:08:06.483] [LOG]   [node_helper] Connecting socket for: calendar
[2026-04-06 09:08:06.485] [LOG]   [calendar] Starting node helper for: calendar
[2026-04-06 09:08:06.486] [LOG]   [node_helper] Connecting socket for: weather
[2026-04-06 09:08:06.488] [LOG]   [weather] Starting node helper for: weather
[2026-04-06 09:08:06.490] [LOG]   [node_helper] Connecting socket for: newsfeed
[2026-04-06 09:08:06.491] [LOG]   [newsfeed] Starting node helper for: newsfeed
[2026-04-06 09:08:06.493] [LOG]   [node_helper] Connecting socket for: MMM-Sonos
[2026-04-06 09:08:06.495] [LOG]   [MMM-Sonos] Sonos helper started ...
[2026-04-06 09:08:06.496] [LOG]   [app] Sockets connected & modules started ...
error: XDG_RUNTIME_DIR is invalid or not set in the environment.
[605210:0406/090806.501637:ERROR:ui/ozone/platform/wayland/host/wayland_connection.cc:202] Failed to connect to Wayland display: No such file or directory (2)
[605210:0406/090806.502006:ERROR:ui/ozone/platform/wayland/ozone_platform_wayland.cc:281] Failed to initialize Wayland platform
[605210:0406/090806.502155:ERROR:ui/aura/env.cc:246] The platform failed to initialize.  Exiting.
/home/dietpi/MagicMirror/node_modules/electron/dist/electron exited with signal SIGSEGV

is this really a dietpi? what OS version is running

DietPi v10.2.3 (I believe that is the latest version)

also, can you send me ~/MagicMirror/installers/upgrade.log
same userid at gmail

Email sent.

Thanks for all your help!

sdetweil

@jca2112 ok edit the mm.sh
and change

npm start

to

npm run start:x11

I know why… I fixed the script on saturday, but didn’t catch that on my mac I was on a different branch, so the master branch didn’t get updated til about 9pm central last night.
I drove all day yesterday, and fixed it again on master…

sdetweil

@jca2112 from the log,

saved translations/en.json

make sure you check on this change, as it was stashed but not re-applied…

jca2112

@sdetweil Yup, it’s working now. Awesome, thank you so much.

(The translations/en.json is just a single word change, so easy to fix manually without being stashed.)