Sonos Module

Snille

Hi @Atreo do you have the http-sonos-api installed on your mirror or on another device?
I had problems before I ran on a raspberry Pi when I ran the mirror in Server mode. Don’t know why though. :)

Atreo

Hi @Snille Thx for the reply.

Yes i have sonos-http-api installed on my mirror,
This is making me crazy, i like the ide to have the information on the mirror.
Banging my head against the wall…

Wedee

I have the Sonos mod running on my Mirror. I get the same thing when I run more than one speaker as a group. If I run each speaker as separate it will load each speaker fine. I haven’t bothered looking into it much as I rarely use the speakers in group mode…

Atreo

Thx for the info @Wedee, I only have one and i am stuck… = /
Any one have any tips ?

Snille

@Atreo Do you get the “zones” up if you do: http://192.168.0.79:5005/zones ?
You should get a list of all the zones and stuff. :)

Atreo

@Snille Yes i can my kitchen zone and i hole lot information what the sonos is playing.

Snille

@Atreo Hmm… Then it should be all good. Can you post your “MMM-Sonos” part of the config?

Snille

@Atreo This is my “MMM-Sonos” config part…

		{
			module: "MMM-Sonos",
			header: "Spelas på SONOS",
			position: "top_center",
			classes: "",
			config: {
				// The API is not om my RPi. It's on another server...
				apiBase: "http://ip-of-the-api",
				apiPort: 5005,
				showAlbumArt: true,
				showRoomName: true,
				showPausedZone: false,
				showStoppedRoom: false,
				preRoomText: 'Rum: ',
				preArtistText: 'Artist: ',
				preTrackText: 'Spår: ',
				preTypeText: 'Källa: ',
				animationSpeed: 1000,
				apiEndpoint: "zones",
				exclude: ["Living-Room-SUB"]
			}
		},

Atreo

@Snille Thx. I will check your setting vs my.

Trevligt att du har det på svenska = )
Tack återkommer strax

Snille

@Atreo Hehe, yes. But let’s keep it to English anyway. :)
You are using my “fork” of the “MMM-Sonos” right, if not some of the config-stuff will not work. :)
This is my fork: https://github.com/Snille/MMM-Sonos