Not again PIR

[xeroxu]

And again me ;). I can not see how my MagicMirror can work so far with my ignorance ok not really Ignorance but Noob, Noob, and for Luck I got Help from her e (THX Mykle1). But now I dont now what really happend, Ihave an PIR 501 and worked really fine with the Module MMM-PIR-Sensor. But now after I put all together in my Frame the Monitor goes off after 2 minuets but turns on b himself after ca. 30 seconds.That never happend befor I had it “free air”. Ok maybe its one or athe module wiche works not together. BTW. I am using a Raspbery PI 3. Edit the Monitor now doesnt turn off :(

[Damian]

@xeroxu

https://forum.magicmirror.builders/topic/2266/problem-with-my-pir-sensor

[xeroxu]

@Damian Thank you, now I got me a Ferrit Bead but it still dont not work. Maybe my coding or my cabling is wrong.

//		{
		module: 'MMM-PIR-Sensor',
		config: {
			// See 'Configuration options' for more information.
	sensorPIN: 22,
                                powerSaving: true
                        }
                },

[xeroxu]

Now that I deleted and reinstalled the module a new problem shows up . After I put the code In my config.js the Monitor stays black after the reboot. I testet the PIR its not broken.

[xeroxu]

Problem solved :)

[Damian]

@xeroxu

How did you manage the fix what was wrong? thank you

[xeroxu]

@Damian I did after i checked the PIR a new npm install in the MM-PIR-Sensor Folder and changed the Sensor Pin to 25 (its the GPIO PIN) wrong thinking thats why I am a Noob ;)

[Damian]

@xeroxu said in Not again PIR:

wrong thinking thats why I am a Noob

Me too but i learn here by reading everything and try to understand better. thank you for reply it will help me too

[xeroxu]

@Damian no prob. im learning from reading and asking?

[xeroxu]

And again after two days the mirror did what he wants . I was nearly at that Point to throw all away and start fom beginning. Baut then i tried a thing , I disabled Bluetooth AND WLAN. And did it that way:

//sudo nano /etc/modprobe.d/raspi-blacklist.conf

blacklist brcmfmac
blacklist brcmutil
blacklist cfg80211
blacklist rfkill
blacklist btbcm
blacklist hci_uart

And after that a Reboot and

//sudo systemctl disable hciuart

and another reboot .

This works, I hope longer then 2 Days ;)

Now I have to work with the Ethernetport and gonna try it with an USB Wlan Dongle