MMM-Bergfex doesent load respectively should be a valid spdx license expression

ReinerZ

This post is deleted!

ReinerZ

This post is deleted!

ReinerZ

This post is deleted!

binderth

strange. I thought i had replied to this already…

my Pi is connected (I’m getting info for every other module quite right!)
I’m using pm2
I just upgraded to 2.2 (in case that matters now - same Output though)
my pm2 log mm reads:

pi@MagicMirror2:~/MagicMirror $ pm2 log mm
[TAILING] Tailing last 15 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 15 lines:
0|mm       | there was a Wunderlist problem { error:
0|mm       |    { type: 'server_error',
0|mm       |      translation_key: 'api_error_unknown',
0|mm       |      message: 'An unknown server error occurred' } } 500
0|mm       | (node:931) MaxListenersExceededWarning: Possible EventEmitter memory leak detected. 11 message listeners added. Use emitter.setMaxListeners() to increase limit
0|mm       | SyntaxError: Unexpected end of JSON input
0|mm       |     at JSON.parse ()
0|mm       |     at Class.loadLogs (/home/pi/MagicMirror/modules/MMM-syslog/node_helper.js:60:21)
0|mm       |     at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-syslog/node_helper.js:45:9)
0|mm       |     at Socket. (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:113:11)
0|mm       |     at emitTwo (events.js:106:13)
0|mm       |     at Socket.emit (events.js:194:7)
0|mm       |     at /home/pi/MagicMirror/node_modules/socket.io/lib/socket.js:514:12
0|mm       |     at _combinedTickCallback (internal/process/next_tick.js:73:7)
0|mm       |     at process._tickCallback (internal/process/next_tick.js:104:9)

/home/pi/.pm2/logs/mm-out-0.log last 15 lines:
0|mm       | 1 snow reports from bergfex.at retrieved.
0|mm       | searching for Zell am Ziller - Zillertal Arena
0|mm       | searching for Gerlos - Zillertal Arena
0|mm       | searching for Hintertuxer Gletscher / Hintertux
0|mm       | Whoops! There was an uncaught exception...
0|mm       | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm       | If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
0|mm       | Starting access to FRITZ!Box...
0|mm       | retrieveAndUpdate()
0|mm       | Use existing news fetcher for url: http://rss.sueddeutsche.de/rss/Topthemen
0|mm       | 1 snow reports from bergfex.at retrieved.
0|mm       | searching for Zell am Ziller - Zillertal Arena
0|mm       | searching for Gerlos - Zillertal Arena
0|mm       | searching for Hintertuxer Gletscher / Hintertux
0|mm       | Access to FRITZ!Box finished.

(wunderlist and syslog working just fine - despite those Errors?)

but still:
0_1515770419968_17342978-e71c-459d-99ba-632ecab7a26c-image.png

marphi1602

@binderth what’s happening in case you would disable the whole wunderlist module and restart mm again?

binderth

@marphi1602
tried this one! :) - just reinstalled the whole 2.2.2 Version and now I don’t get any Errors:

pi@MagicMirror2:~ $ pm2 logs
[TAILING] Tailing last 15 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/pm2.log last 15 lines:
PM2        | 2018-01-12 18:39:38: Current arch         : arm
PM2        | 2018-01-12 18:39:38: PM2 home             : /home/pi/.pm2
PM2        | 2018-01-12 18:39:38: PM2 PID file         : /home/pi/.pm2/pm2.pid
PM2        | 2018-01-12 18:39:38: RPC socket file      : /home/pi/.pm2/rpc.sock
PM2        | 2018-01-12 18:39:38: BUS socket file      : /home/pi/.pm2/pub.sock
PM2        | 2018-01-12 18:39:38: Application log path : /home/pi/.pm2/logs
PM2        | 2018-01-12 18:39:38: Process dump file    : /home/pi/.pm2/dump.pm2
PM2        | 2018-01-12 18:39:38: Concurrent actions   : 2
PM2        | 2018-01-12 18:39:38: SIGTERM timeout      : 1600
PM2        | 2018-01-12 18:39:38: ===============================================================================
PM2        | 2018-01-12 18:39:38: Starting execution sequence in -fork mode- for app name:mm id:0
PM2        | 2018-01-12 18:39:38: [Watch] Start watching MagicMirror
PM2        | 2018-01-12 18:39:38: Starting execution sequence in -fork mode- for app name:MagicMirror id:1
PM2        | 2018-01-12 18:39:39: App name:mm id:0 online
PM2        | 2018-01-12 18:39:39: App name:MagicMirror id:1 online

/home/pi/.pm2/logs/MagicMirror-error-1.log last 15 lines:
1|MagicMir | (node:965) DeprecationWarning: sys is deprecated. Use util instead.

/home/pi/.pm2/logs/mm-error-0.log last 15 lines:
0|mm       |     at Object.exports._errnoException (util.js:1026:11)
0|mm       |     at exports._exceptionWithHostPort (util.js:1049:20)
0|mm       |     at Server._listen2 (net.js:1253:14)
0|mm       |     at listen (net.js:1289:10)
0|mm       |     at net.js:1399:9
0|mm       |     at _combinedTickCallback (internal/process/next_tick.js:77:11)
0|mm       |     at process._tickCallback (internal/process/next_tick.js:98:9)
0|mm       |     at Module.runMain (module.js:592:11)
0|mm       |     at run (bootstrap_node.js:402:7)
0|mm       |     at startup (bootstrap_node.js:157:9)
0|mm       |   code: 'EADDRINUSE',
0|mm       |   errno: 'EADDRINUSE',
0|mm       |   syscall: 'listen',
0|mm       |   address: '0.0.0.0',
0|mm       |   port: 8080 }

/home/pi/.pm2/logs/mm-out-0.log last 15 lines:
0|mm       | Connecting socket for: MMM-FRITZ-Box-Callmonitor
0|mm       | Starting module: MMM-FRITZ-Box-Callmonitor
0|mm       | Connecting socket for: MMM-DWD-WarnWeather
0|mm       | MMM-DWD-WarnWeather helper started...
0|mm       | Connecting socket for: MMM-mqtt
0|mm       | MMM-mqtt started ...
0|mm       | Connecting socket for: MMM-bergfex
0|mm       | Starting node helper: MMM-bergfex
0|mm       | Connecting socket for: newsfeed
0|mm       | Starting module: newsfeed
0|mm       | Sockets connected & modules started ...
0|mm       | Whoops! There was an uncaught exception...
0|mm       | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
0|mm       | If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
0|mm       | Launching application.

/home/pi/.pm2/logs/MagicMirror-out-1.log last 15 lines:
1|MagicMir | Create new news fetcher for url: http://rss.sueddeutsche.de/rss/Topthemen - Interval: 300000
1|MagicMir | 1 snow reports from bergfex.at retrieved.
1|MagicMir | searching for Zell am Ziller - Zillertal Arena
1|MagicMir | searching for Gerlos - Zillertal Arena
1|MagicMir | searching for Hintertuxer Gletscher / Hintertux
1|MagicMir | Access to FRITZ!Box finished.
1|MagicMir | No log file found.
1|MagicMir | Starting access to FRITZ!Box...
1|MagicMir | retrieveAndUpdate()
1|MagicMir | Use existing news fetcher for url: http://rss.sueddeutsche.de/rss/Topthemen
1|MagicMir | 1 snow reports from bergfex.at retrieved.
1|MagicMir | searching for Zell am Ziller - Zillertal Arena
1|MagicMir | searching for Gerlos - Zillertal Arena
1|MagicMir | searching for Hintertuxer Gletscher / Hintertux
1|MagicMir | Access to FRITZ!Box finished.

still - I get “1 snow reports from bergfex.at retrieved.” - but none show up…

PS: I always get the EADDRINUSE error, if I do pm2 restart mm.

marphi1602

@binderth mhhh are you sure that no other mm instance is parallel running or an additional app is also listening on the same port?

Kill all other pm instances before - pm2 delete all

Try the following and put only the bergfex module to your config and post your config.

binderth

@marphi1602
yes, I’m sure no other is running.

Got it figured out - after some debugging in node_helper.js I figured, it was strange, that I only found “1 sno report” - and after some annoying reloads (I’m not a developer, not to speak of JS), I found the only one issue for mmm-bergfex on github:
https://github.com/nebulx29/MMM-bergfex/issues/1#issuecomment-355083367

9days ago, Rainer added not only the deprecated “sys -> util” has to be changed, but also the “tbody var” - that did the trick for me! it worked!!

tl:dr>

add “private”: true, after “license”: “Apache 2.0”, inside package.json to avoid the license problem
change inside node_helper.js

var sys = require('sys'); to
//var sys = require('sys');
var util = require('util');

change inside node_helper.js

var tbody = $('.content').children().last(); to
var tbody = $('.content>table').children().last();

binderth

@binderth said in MMM-Bergfex doesent load respectively should be a valid spdx license expression:

yes, I’m sure no other is running.

I’m not so sure anymore! ;)
When I reinstalled MagicMirror2 from scratch, it seems, pm2 added another instance called “MagicMirror” - so I got two running - but that is another issue I’m currently working on - perhaps coming back to the Forum in a new thread.