Further development of the MMM-Swipe module

[thobach]

@nawak86 Unfortunately, it is probably one of the most difficult modules as it consists of two sensors and an Arduino connected to the Pi. The wiring is described at https://github.com/thobach/MMM-Gestures/blob/master/Arduino/MagicMirror2/MagicMirror2.ino#L31 (Arduino) and https://github.com/thobach/MMM-Gestures/blob/master/README.MD. I don’t have a wiring picture.

You can see it in action though on https://www.youtube.com/watch?v=V8a6UgeoYOU.

[nawak86]

@thobach f*ck i dont see hardware who is required before !! so i must buy an arduino one can you tell me if it is that : https://www.amazon.fr/Elegoo-Carte-ATmega328P-ATMEGA16U2-Arduino/dp/B01N91PVIS/ ??? infact just plug sensor on arduino send library by software and connect to the raspberry with usb and git clone module et npm install ? for the movement it works with MMM-Pages ? sorry i’m a noob with that ;)

[nowis]

Hi @nawak86, after setting up the two HC-SR04 sensors, I am not very happy with its performance. It basically works, also with the Pages module.
It sounds like @thobach is pretty happy with his gestures module (even you need an Arduino besides the Pi, right?).
Here is a picture of how I integrated the sensors into my mirror, I could maybe upload a video in the next days.
For connecting everything you need the two sensors, jumper wires, 2 times a 1k Ohm resistance, a breadboard.

[nawak86]

hello thank you for your answer @nowis I can try both solutions and make a choice. I’m not against a small video, I’m waiting for @thobach confirms me that the arduino product on amazon is the good. MMM-Swipe works with MMM-Pages but I do not know how MMM-Gesture changes page

[nawak86]

Allo ? ? :p no answer ? :(