Fitbit

Hellangel1987

good job buddy now it works but i dont get any numbers :(

olliewarren411

@Hellangel1987
No Problem.

When you run #sudo python setupAccess.py# on the python directory inside the MMM-fitbit folder does it redirect you to log into you fitbit account in an internet browser?

Also what fitbit model are you using? I tried this with a fitbit alta and it didn’t work. Then I tried with my fitbit ChargeHR and it works perfect* see attached. I changed the CSS to display vertically.

*i say it works perfect i just need a way to keep the connection to my fitbit account over a long period of time without having to re-run sudo python setupAccess.py on the python directory once a day.

Hellangel1987

@olliewarren411

Im using The Fitbit Charge HR

olliewarren411

@Hellangel1987
When you run #sudo python setupAccess.py# on the python directory inside the MMM-fitbit folder does it redirect you to log into you fitbit account in an internet browser?

Hellangel1987

@olliewarren411

yepp works perfect. i have the token and autorized that app in browser.
after that i startet mirror with sudo npm start. but only zero numbers are shown :(

Did i have to do this once a day? Any cronjob for that ?

olliewarren411

@Hellangel1987

Sorry I’m out of ideas then.

Cronjob? I’m pretty new to this.

Hellangel1987

@olliewarren411 can you describe your steps and your configs ? i think there is any missconfiguration in my credentials config i think soo.

olliewarren411

@Hellangel1987

I cant easily explain as I had to play around a lot to get it to work… and then it just did.

When setting up your app on the fitbit website did you get the below steps?

Check browser and personal for OAuth settings
Callback URL MUST BE http://127.0.0.1:8080/
Give your app read & write permissions (read-only untested)

I could not set the Personal and OAuth settings until I got my personal URL wrong. When the page reloaded these two extra options appeared.

Hellangel1987

@olliewarren411

i set it all on that page. exeption was my location. but all other options are set.

Hellangel1987

@olliewarren411

works! i sued your code. Delete the token. set it up new - start it with sudo npm start in MagicMirror directory. -> WORKS!

I think i missunterstand the fibit API page where you have some buttons tu push and autorize the app (i think i pushed them in the wrong way)…

You sayed something about your token.ini -> can you explain what exactly you have to to every day? i think about an cronjob for that - good chance to solve that together!

And another option is the weight of my fitbit ARIA, these data are also available - how can we bind them into the app ?

olliewarren411

@Hellangel1987
Glad to hear you got it working.

I’m just trying to get the module to refresh more often. Not sure how to go about it.

You probably could get your weight data in too, you’d need to contact the creator of the module for that.

kckndrgn

@olliewarren411 said in Fitbit:

Yes, you can change the refresh interval. In the script MMM-fitbit.js you’ll see

start: function() {
		Log.info('Starting module: ' + this.name);
		this.sendSocketNotification('SET CREDS',this.config.credentials)
		this.sendSocketNotification('GET DATA', 'intial');
		
		this.fadeSpeed = 500;
		
		// Schedule update interval.
		var self = this;
		setInterval(function() {
			self.updateData();
		}, 60*60*1000);
},

change the 60 x 60 x 1000 to an interval of your choosing. Just be careful to to refresh too often as you’ll get emails from FB telling you that you are pulling too much data. I think (and I’d have to check tonight) that I have mine set to 15 x 60 x 1000.

olliewarren411

@kckndrgn

Thanks! works perfect. I’ve copied your set up so it refreshes the data every 15 mins.

plumcraft

I was getting invalid redirect_uri during the setup process. (sudo python setupAccess.py)

But now It’s working for me, great module !

kckndrgn

Anyway to get around having to run the setupAccess.py everyday/every other day to keep the tokens fresh?
Since I have to stop the MM from running, run the script to get new token, start MM again, it gets kind of annoying. I also run my Pi w/o keyboard/mouse so when I need to refresh the tokens I have to connect them.
I thought about adding a cron job to stop the MM, run the script and start MM, thoughts? Since the script leaves a browser window open, can the cron job kill it or is there a way to have the python script close the window when done?

TIA

Hellangel1987

@kckndrgn

dont know exactly but im also interested in your cronjob solution, can you inform us about your steps ? im tired getting every day that setupaccess working :(

kckndrgn

@Hellangel1987 said in Fitbit:

@kckndrgn

dont know exactly but im also interested in your cronjob solution, can you inform us about your steps ? im tired getting every day that setupaccess working :(

I haven’t done it, yet, just thinking about it since it was mentioned. I think I’ve narrowed down the issue though:

{"message": {"401": {"errors": [{"message": "Access token expired: eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiI0NU5QMzUiLCJhdWQiOiIyMjdRVjkiLCJpc3MiOiJGaXRiaXQiLCJ0eXAiOiJhY2Nlc3NfdG9rZW4iLCJzY29wZXMiOiJ3aHIgd3BybyB3bnV0IHdzbGUgd3dlaSB3c29jIHdhY3Qgd3NldCB3bG9jIiwiZXhwIjoxNDcxNzAxNjYzLCJpYXQiOjE0NzE2NzI4NjN9.VvLWtyYYvVShgrWC4UOVMXfdv0uiy7Nic-WDj7RMiKA. Visit https://dev.fitbit.com/docs/oauth2 for more information on the Fitbit Web API authorization process.", "errorType": "expired_token"}], "success": false}}, "type": "error"}
{"message": "Getting a new access token", "type": "status"}
{"message": "Error getting new access token", "type": "error"}
{"message": {"400": {"errors": [{"message": "Refresh token invalid: 4292cf037821b9441122e432bdd92a238fac61028dfbd6be982d2e6b73474c32. Visit https://dev.fitbit.com/docs/oauth2 for more information on the Fitbit Web API authorization process.", "errorType": "invalid_grant"}], "success": false}}, "type": "error"}

First got an “expired” token notice, then the process tries to get a new token (possibly using the “refresh” token, I’m not sure at this point). But refresh tokens are valid for one use only, so it’s like the updated token is getting updated in the token.ini file.

plumcraft

Also interested with the cron mechanism, the module could execute the setupAccess process once a day and trigger a reload on the gui ?

I’m using vnc to connect remotely on the RPI since i don’t have mouse/keyboards connected.

kckndrgn

3 days of syncing without an issue. Not sure what changed, I did pull the latest dev code for MM but made no changes to the fitbit module.
(of course now that I’ve said this, it will error out during the day :) )

kckndrgn

Had my first issues in a while last night. The problem was that my router lost internet connection and when it was restored the tokens were expired. I ran the setupAccess.py and got new tokens.
Seems that there should be a better way to reset the module on restart, like if the tokens are expired, the go get new ones.