Read the statement by Michael Teeuw here.
LG FLatron 2242PE check signal cable PIR Sensor
-
I had a small “problem”, i got the PIR motion sensor to work, when there is no motion the signal to the monitor gets closed. However when this happens my monitor shows the message: Check signal cable. Is there a way to turn this off or is there a work-around?
-
Monitor should get to sleep if there is no signal … this should be configurable somewhere in monitor menu / configuration (try buttons on monitor to set it up)
-
@Justinvd0203
I had a similar problem with my LG Monitor and PIR-Sensor.
In my case i had the following behavior:- Using HDMI Connection: switching off was possible, wake up not
- Using VGA Connection (with HDMI->VGA adapter on RPI side): switching off an wake up was possible
Details see post.
No worry using HDMI->VGA adapter: VGA can also deliver FullHD Resolution.
Maybe your problem could be solved with an adapter.
AxLED
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login