MMM-AssistantMk2 / MMM-Hotword Issue

[BJ Duncan]

No dramas at all.

Now you need to double check that you are pointing to the correct device number for your audio with the Assistant module.
In a terminal at the root directory (pi@raspberrypi:~ ) Check the device list for audio input:

arecord -l

This should provide you a list of CAPTURE Hardware Devices. The numbers you want to write down is the Card number, and device number.
As an example on my device I have it as Card: 2 Device: 0

Now within the config.js of the MagicMirror ensure that the device number is the same. Here is what it looks like within my config.js:

{
		  module: "MMM-AssistantMk2",
		  position: "bottom_bar",
		  config: {
		    record: {
		      recordProgram : "arecord",  
		      device        : "plughw:2",
		    },
		
		    notifications: {
		      ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
		      ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
		    },
		  }
		},
		{
		  module: "MMM-Hotword",
		  config: {
		    chimeOnFinish:null,
		    mic: {
		      recordProgram : "arecord",  
		      device        : "plughw:2",
		    },
		    models: [
		      {
		        hotwords    : "smart_mirror",
		        file        : "smart_mirror.umdl",
		        sensitivity : "0.5",
		      },
		    ],
		    defaultCommand: {
		      notificationExec: {
		        notification: "ASSISTANT_ACTIVATE",
		        payload: (detected, afterRecord) => {
		          return {profile:"default"}
		        }
		      },
		      afterRecordLimit:0,
		      restart:false,
		    },
		  },
},

Notice within both my modules because my card number is ‘2’, that the

device : "plughw:2",

So make sure your number corresponds with your Card number.

Give that a test and we will go from there.

[JonoGee]

@BJ-Duncan said in MMM-AssistantMk2 / MMM-Hotword Issue:

arecord -l

I get this…

pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $ 

[JonoGee]

@JonoGee I recognised both devices as 0 so I changed accordingly. Now i get this error message. Mirror opens but closes immediately…

[MMM-PushBulletNotifications][Info] 13:58:15.164 - PushBullet connected
[HOTWORD] begins.
[HOTWORD] Detector starts listening.
/home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-Hotword/snowboy/lib/node/binding/Release/electron-v3.0-linux-arm/snowboy.node: undefined symbol: cblas_sdot
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.7.1 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR! 
npm ERR! Failed at the magicmirror@2.7.1 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-07-01T12_58_15_977Z-debug.log
pi@raspberrypi:~/MagicMirror $ 

[JonoGee]

@JonoGee If devices are set as…

hw:0,0

The mirror works, but Assistant/Hotword doesm’t. I just changed to …```
plughw:0

and it crashes

[BJ Duncan]

What type of microphone is it? Is it USB?
Also, what version of Raspbian are you using? And is it Raspberry Pi 3+ ?

[JonoGee]

@BJ-Duncan
The Mic is a combined Speaker / Mic HAT as see here… https://www.raspiaudio.com/raspiaudio-aiy

I am running Raspberry Pi3+
Version…

pi@raspberrypi:~ $ lsb_release -a
No LSB modules are available.
Distributor ID:	Raspbian
Description:	Raspbian GNU/Linux 9.9 (stretch)
Release:	9.9
Codename:	stretch
pi@raspberrypi:~ $ 

[BJ Duncan]

Sorry @JonoGee mate, I may not be the best person to resolve as I have USB Mic so my settings will be different to yours.

I will attempt to do some research for you though and see if I can assist with a solution.

[JonoGee]

@BJ-Duncan
I realise both Speaker & Mic are on same Hat but does it make sense to you that the ID for aplay and arecord are exactly the same. Code included below…

pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $ 

[JonoGee]

@JonoGee I mean I supposedly I have to set both IDs in config file to hw:0,0.

[JonoGee]

@BJ-Duncan What Mic do you use mate? I might just buy same one.lol