MMM-AssistantMk2 / MMM-Hotword Issue

JonoGee

@JonoGee I recognised both devices as 0 so I changed accordingly. Now i get this error message. Mirror opens but closes immediately…

[MMM-PushBulletNotifications][Info] 13:58:15.164 - PushBullet connected
[HOTWORD] begins.
[HOTWORD] Detector starts listening.
/home/pi/MagicMirror/node_modules/electron/dist/electron js/electron.js: symbol lookup error: /home/pi/MagicMirror/modules/MMM-Hotword/snowboy/lib/node/binding/Release/electron-v3.0-linux-arm/snowboy.node: undefined symbol: cblas_sdot
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.7.1 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR! 
npm ERR! Failed at the magicmirror@2.7.1 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-07-01T12_58_15_977Z-debug.log
pi@raspberrypi:~/MagicMirror $

JonoGee

@JonoGee If devices are set as…

hw:0,0

The mirror works, but Assistant/Hotword doesm’t. I just changed to …```
plughw:0

and it crashes

BJ Duncan

What type of microphone is it? Is it USB?
Also, what version of Raspbian are you using? And is it Raspberry Pi 3+ ?

JonoGee

@BJ-Duncan
The Mic is a combined Speaker / Mic HAT as see here… https://www.raspiaudio.com/raspiaudio-aiy

I am running Raspberry Pi3+
Version…

pi@raspberrypi:~ $ lsb_release -a
No LSB modules are available.
Distributor ID:	Raspbian
Description:	Raspbian GNU/Linux 9.9 (stretch)
Release:	9.9
Codename:	stretch
pi@raspberrypi:~ $

BJ Duncan

Sorry @JonoGee mate, I may not be the best person to resolve as I have USB Mic so my settings will be different to yours.

I will attempt to do some research for you though and see if I can assist with a solution.

JonoGee

@BJ-Duncan
I realise both Speaker & Mic are on same Hat but does it make sense to you that the ID for aplay and arecord are exactly the same. Code included below…

pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: sndrpigooglevoi [snd_rpi_googlevoicehat_soundcar], device 0: Google voiceHAT SoundCard HiFi voicehat-codec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~ $

JonoGee

@JonoGee I mean I supposedly I have to set both IDs in config file to hw:0,0.

JonoGee

@BJ-Duncan What Mic do you use mate? I might just buy same one.lol

BJ Duncan

Hey @JonoGee, mate I have been researching but to no avail. Sorry mate on that. I’m just not too familiar with your set up.
The Mic and Speakers I got are just some cheap USB type models.
Speakers | Mic

If you do go by this type of setup then the previous code I placed up should work #fingersCrossed ;-)