Can't rotate touchinterface to portrait mode HELP!!!

[M1K3rSz]

Anyone know if its possible to get the screen (42") to run in portrait mode “with” touch (USB) functionality? The display and touch work great in landscape mode, but I cannot get it to work in portrait.

Adding the following in the config.txt seem to have no effect on touch:

display_rotate=3

or

lcd_rotate=3

However, lcd_rotate=3 does rotate screen but no luck on touch interface

I’m running the latest MM2 v2.3.1 config, on a Raspberry Pi 3.

Please help!!

[M1K3rSz]

For Real??

Nobody can help me?

[broberg]

@M1K3rSz give xinput_calibrator a try : https://www.raspberrypi.org/forums/viewtopic.php?t=78805

Other than that I can not help you.

[gverbist]

I want to re-up this case as in my opinion this was never solved. I am using the new GL driver and now facing the same issue as the initial poster.

How do you rotate the touch interface. Its a iyama screen with build in touch

[broberg]

@gverbist Try rotating the content of the webpage instead of rotating the entire screen.

https://forum.magicmirror.builders/topic/9707/save-performance-when-rotating-screen-e-g-on-raspberry-pi