MMM-RTSPStream dosent work in my case

[barnosch]

Here is my working config.

 {
                module: 'MMM-RTSPStream',
                position: 'bottom_left',
                config: {
                        autoStart: true,
                        rotateStreams: false,
                        rotateStreamTimeout: 10,
                        showSnapWhenPaused: false,
                        moduleWidth: 352,
                        moduleHeight: 240,
                        moduleOffset: -20,
                        localPlayer: 'omxplayer',  //omxplayer oder ffmpeg
                stream1: {
                        name: 'Door',
                        url: 'rtsp://10.30.10.28', //update with your IP
                        snapshotUrl: '',
                        snapshotRefresh: 10, // Seconds
                        frameRate: "30",
                        port: 9999,
                         }
                        }
                },

i would suggest, you only change the IP adress, without port or the authbasic stuff…
I also have password set, but for some reason, i do not need to pass it to the module.
I played around a little bit, but as soon as i change the port or something… it does not work anymore.
Maybe worth a try.
Otherwise, bring the developer in here… he is very helpful and has for sure another tips you can try.

[alverman]

Thanks barnosch,
I think I’ve solved the problem: D
I think because I’m working remotely and I can not see if the stream is shown or not but I trust.
I practically lost a pass that eliminated the sound.
So I think that everything is resolved.
I see the stable connection from the remote console and then almost for sure that the module now works.
I find it in issue.
The command it solves is:
git fetch - all
git checkout nosound

I’ll let you know as soon as I see it with my eyes
:)

[alverman]

Solved !!

[shbatm]

@alverman – I’m the creator of the module and I wanted to apologize, I’ve been working on other projects and not following this forum very closely the past few months. I’m glad you got everything solved, I’m sorry I wasn’t able to assist.

In the future, if you have any issues with one of the modules I created, please tag me (@shbatm) or open an issue on the module’s Issue page at github.com so I get a notification and will be happy to assist.

[sepulvar]

Can you share your final configuration?