MMM-RTSPStream dosent work in my case

[alverman]

hi barnosch,
the string is just that inserted in the forum has taken this look.
The string in the configuration is right.
One test I did not do is the one you have proposed.
after I put the video file on my desktop I changed the form string with:

{
module: "MMM-RTSPStream",
position: "slide1mods_bottom_left",
header: "Video Surveillance",
config: {
autoStart: true,
rotateStreams: true,
rotateStreamTimeout: 10,
moduleWidth: 3,
moduleHeight: 240,
localPlayer: "omxplayer",
remotePlayer: "ffmpeg",
showSnapWhenPaused: true,
remoteSnaps: true,
stream1: {
name: 'Cam1',
// url: "rtsp://10.0.0.60:554/h264/?ch=1&subtype=1&authbasic=admin:123456"
url: '/home/pi/Desktop/test.h264',
frameRate: '15',
protocol: 'tcp',
hdUrl: 'none',
snapshotType: 'url',
snapshotRefresh: 10,
width: undefined,
height: undefined,
ffmpegPort: 9999,
},
}
},

But you see nothing.
Performing the console test file with:

omxplayer /home/pi/Desktop/test.h264

I see the movie !!
I do not know what else to try !!

[barnosch]

have you installed the dependencies from the module?
“npm install” within the MMM-RTSP folder

Could it maybe be a issue with your custom made CSS “postition”?
Maybe you should try a ordinary original one for testing

[alverman]

Hi barnosch,
I ran npm install in the module MMM-RTSPStram folder.
I had already tried the normal MagicMirror css and went the same way.
On pi3 I have two versions of MagicMirror installed.
An original and one with all the modules I need.
To try one or the other version, rename the Home/pi/MagicMirror folder and test it

Thanks for your attenction, Alberto

[alverman]

Good morning,
I made a small step but I have not been able to solve it yet.
Until now I have tried console to display rtsp stream from my dvr without result.
Just putting the line -n -1 (no audio) succeeded, from the command line, to display the flow.
Then in the configuration file (config.js) or the MMM-RTSTStream module you should enter the parsing -n -1 !!
But how do I do it?

Thank you, Alberto

[alverman]

Another problem, always in console, is that if the stream tends to lower itself, the omxplayer closes

[alverman]

So I think I’ve solved the problem of why the console flow is interrupted!
from console I have to give this command:

omxplayer -g -n -1 --timeout 0 --avdict rtsp_transport: tcp "rtsp://10.0.0.60:554/h264/?ch=1&subtype=1& authbasic = admin:123456"

So now how can I add the switches:

-g -1 --timeout 0 --avdict rtsp_transport: tcp 

in config.js?

Any help please?

Thank you, Alberto

[alverman]

@alverman said in MMM-RTSPStream dosent work in my case:

So I think I’ve solved the problem of why the console flow is interrupted!
from console I have to give this command:
omxplayer -n -1 --timeout 0 --avdict rtsp_transport: tcp “rtsp://10.0.0.60:554/h264/?ch=1&subtype=1& authbasic = admin:123456”

So now how can I add the switches:
-n -1 --timeout 0 --avdict rtsp_transport: tcp

in config.js?
Any help please?
Thank you, Alberto

[alverman]

Sorry if I keep on this monologue but I’m going crazy !!
I’ve tried MagicMirror with only the standard modules and the MMM-RSPSream module.
Created the code to enter in config.js
Enter the code in config.js
Starting npm start I see the frame of rtsp stream but I do not see anything.
If I hit the frame I see the play icon if I get it I see the pause icon as if the stream was played but I see nothing.

I’m really tired of this thing.
I know it might go but it does not go and I just miss this form to close the project.

Really give me a hand please

Thank you, Alberto

[barnosch]

Here is my working config.

 {
                module: 'MMM-RTSPStream',
                position: 'bottom_left',
                config: {
                        autoStart: true,
                        rotateStreams: false,
                        rotateStreamTimeout: 10,
                        showSnapWhenPaused: false,
                        moduleWidth: 352,
                        moduleHeight: 240,
                        moduleOffset: -20,
                        localPlayer: 'omxplayer',  //omxplayer oder ffmpeg
                stream1: {
                        name: 'Door',
                        url: 'rtsp://10.30.10.28', //update with your IP
                        snapshotUrl: '',
                        snapshotRefresh: 10, // Seconds
                        frameRate: "30",
                        port: 9999,
                         }
                        }
                },

i would suggest, you only change the IP adress, without port or the authbasic stuff…
I also have password set, but for some reason, i do not need to pass it to the module.
I played around a little bit, but as soon as i change the port or something… it does not work anymore.
Maybe worth a try.
Otherwise, bring the developer in here… he is very helpful and has for sure another tips you can try.

[alverman]

Thanks barnosch,
I think I’ve solved the problem: D
I think because I’m working remotely and I can not see if the stream is shown or not but I trust.
I practically lost a pass that eliminated the sound.
So I think that everything is resolved.
I see the stable connection from the remote console and then almost for sure that the module now works.
I find it in issue.
The command it solves is:
git fetch - all
git checkout nosound

I’ll let you know as soon as I see it with my eyes
:)

[alverman]

Solved !!

[shbatm]

@alverman – I’m the creator of the module and I wanted to apologize, I’ve been working on other projects and not following this forum very closely the past few months. I’m glad you got everything solved, I’m sorry I wasn’t able to assist.

In the future, if you have any issues with one of the modules I created, please tag me (@shbatm) or open an issue on the module’s Issue page at github.com so I get a notification and will be happy to assist.

[sepulvar]

Can you share your final configuration?