Almost done need to active my mirror by Phrase

[otto]

@Sean thanks for reply

  commands: {
    "hideall": {
      moduleExec: {
        **module: [],**
        exec: (module) => { module.hide()}````
Do i need write all of the module namn? or is that module [], inculude all of my module? 


if so i "just need to"
1. record audio file using tranier
2  add the file to models directory
2. add the recipe file to  recipes directory
3. add config js : recipes: ["hide_show_all"]

any it that right?

[A Former User]

@otto
module: [] will point all modules.
if you want, you can add specific module names in it. like module:["clock", "calendar"]

Your attempt is right. Wish you good luck.
If you have trouble, contact me via these;

• mail : eouia0819@gmail.com
• Telegram : @eouia
  Or github issue board.

[smassy]

@otto

The way I did it is by using MMM-Assistantmk2, hotword and google voice reco. There is an already build ‘recipe’ in Assistantmk2 that do what you want.

The module is hide_and_show_all_modules.js

var recipe = {
  transcriptionHook: {
    "HIDE_ALL_MODULES": {
      pattern: "Go to sleep",
      command: "HIDEMODULES"
    },
    "SHOW_ALL_MODULES": {
      pattern: "Wake up",
      command: "SHOWMODULES"
    },
  },
  command: {
    "HIDEMODULES": {
      moduleExec: {
        module:()=>{
          return []
        },
        exec: (module, params, key) => {
          module.hide(1000, null, {lockString:"AMK2"})
        }
      }
    },
    "SHOWMODULES": {
      moduleExec: {
        module:()=>{
          return []
        },
        exec: (module, params, key) => {
          module.show(1000, null, {lockString:"AMK2"})
        }
      }
    },
  },
}

exports.recipe = recipe

In your config.js file , within the MMM-AssistantMk2 section, there is a line where you have to put all your ‘recipes’

recipes: ["hide_and_show_all_modules.js","playlist.js","volume.js"],

When I say ‘Jarvis Go to sleep’ my screen goes black and then when I say ‘Jarvis Wake up’ all my modules appear.

For the record I’m french :smiling_face: so the phrases there are not the one I’m using, it may need some test so you don’t use google reserved words.

[otto]

yes i am doing almost the same, i found the hide_and show all… i did make new hotword, and have edit the recipes… so all i have left now, was to start it and see it work but, cant some error in the config…

[otto]

i cant post my code, the forum is saying its spam:/

	               position: "top_right",
	               config: {
                       recipes: ["hiden_show_all.js",]
		       chimeOnFinish: null,
		       mic: {
			recordProgram: "arecord",
			device: "plughw:1"
		},
		models: [
			{
				hotwords    : "smart_mirror",
				file        : "smart_mirror.umdl",
				sensitivity : "0.5",
			},
		],
		commands: {
			"smart_mirror": {
				notificationExec: {
					notification: "ASSISTANT_ACTIVATE",
					payload: (detected, afterRecord) => {
						return {profile:"default"}
					}
				},
				restart:false,
				afterRecordLimit:0 ```

i am geting error on **chimeOnFinish: null,**

[A Former User]

@otto
First, you should confirm how it works; With MMM-Hotword itself? or With MMM-AssistantMk2? both are slightly different. I think you have some confusing at this moment.

[otto]

@Sean dont relly understand you post. and dont rely know what i sholde do next, this is the first boot up afteri have create hotword, recipes, dont know if its wrong in my config or in my files,

this is my config:
https://pastebin.com/bw4QpXnL

it feels like my config is a bit messy?

[otto]

@smassy can u post your config, whant to see whear u add the recipes line,

[otto]

so i got some time over today, to test it all,

if i say: hide all module it dosent work
but it if i say :Smart mirror hide all modules it works
but mirror mirror on the wall i just get some saying from it, not show the modules.
i need to say :smart mirror show all module it works

can i some way change so i dont need to say smart mirror, just hide all module?

i now need to trying found out what is wrong…dont know wher to start, i guees the .pdl i a good one

[A Former User]

@otto
You can use MMM-Hotword standalone without MMM-AsistantMk2 just to call simple Hotword as a command.
Make your own .pmdl(“hide modules”). Then make a command of MMM-Hotword to be executed when “hide modules” be called.