Read the statement by Michael Teeuw here.
Magic Mirror updated now doesnt work
-
@sdetweil git pull but I had to stash as I had made changes to the .css file of one of the modules.
-
@bachoo786 did u also do the required npm install after the git pull??
apologize, where did u see the instructions?
many users are having this problem, want to see if I can fix that
-
@sdetweil I just searched on MM forum I did git pull and after that done the npm install but have problems. I cannot also access the mirror on another machine. I have forwarded the mirror ports too.
-
@bachoo786 ok, did the npm install good…
please edit the run-start.sh and change line 1 to
#!/bin/bash -xsave
then npm start againalso, what modules do you have installed?
if they have a package.json, did u do an npm install in those module folders? -
@sdetweil my run-start.sh already contains the # before !bin/bash-x see below:
#!/bin/bash # use bash instead of sh ./untrack-css.sh if [ -z "$DISPLAY" ]; then #If not set DISPLAY is SSH remote or tty export DISPLAY=:0 # Set by default display fi # get the processor architecture arch=$(uname -m) false='false'all my modules have package.json and I did do a npm install. The last module I installed was mmm-remote control via the script that was on the module github page.
-
@bachoo786 you missed the -x at the end… turns on bash debug
#!/bin/bash -x -
@bachoo786 said in Magic Mirror updated now doesnt work:
all my modules have package.json and I did do a npm install.
SINCE you did the magicmirror upgrade?
-
@sdetweil so this is the result:
pi@raspberrypi:~/MagicMirror $ npm start > magicmirror@2.10.0 start /home/pi/MagicMirror > ./run-start.sh + ./untrack-css.sh + '[' -z '' ']' + export DISPLAY=:0 + DISPLAY=:0 ++ uname -m + arch=armv7l + false=false ++ grep -v '^\s//' config/config.js ++ grep -i serveronly: ++ tr -d ',"'\''' ++ awk '{print tolower($2)}' + serveronly= + serveronly=false ++ pgrep Xorg + xorg=519 ++ uname + mac=Linux + '[' false. '!=' false. -o armv7l == armv6l ']' + '[' 519. == . -a Linux '!=' Darwin ']' + electron js/electron.js [15:39:07.703] [LOG] Starting MagicMirror: v2.10.0 [15:39:07.725] [LOG] Loading config ... [15:39:07.735] [LOG] Loading module helpers ... [15:39:07.814] [LOG] Initializing new module helper ... [15:39:07.817] [LOG] Module helper loaded: updatenotification [15:39:07.819] [LOG] No helper found for module: clock. [15:39:08.557] [LOG] Initializing new module helper ... [15:39:08.558] [LOG] Module helper loaded: MMM-SystemStats [15:39:08.559] [LOG] No helper found for module: currentweather. [15:39:08.560] [LOG] No helper found for module: weatherforecast. [15:39:08.561] [LOG] No helper found for module: random_quotes. [15:39:08.564] [LOG] Initializing new module helper ... [15:39:08.564] [LOG] Module helper loaded: MMM-homeassistant-sensors [15:39:09.297] [LOG] Initializing new module helper ... [15:39:09.298] [LOG] Module helper loaded: MMM-UKNationalRail [15:39:09.299] [LOG] No helper found for module: MMM-TFL. [15:39:09.368] [LOG] Initializing new module helper ... [15:39:09.369] [LOG] Module helper loaded: newsfeed [15:39:09.370] [LOG] All module helpers loaded. [15:39:09.372] [LOG] Starting server on port 8181 ... [15:39:09.389] [INFO] You're using a full whitelist configuration to allow for all IPs [15:39:09.408] [LOG] Server started ... [15:39:09.410] [LOG] Connecting socket for: updatenotification [15:39:09.413] [LOG] Connecting socket for: MMM-SystemStats [15:39:09.415] [LOG] Connecting socket for: MMM-homeassistant-sensors [15:39:09.418] [LOG] Connecting socket for: MMM-UKNationalRail [15:39:09.420] [LOG] MMM-UKNationalRail helper started ... [15:39:09.421] [LOG] Connecting socket for: newsfeed [15:39:09.422] [LOG] Starting module: newsfeed [15:39:09.423] [LOG] Sockets connected & modules started ... [15:39:09.587] [LOG] Whoops! There was an uncaught exception... [15:39:09.588] [ERROR] { Error: listen EADDRINUSE 127.0.0.1:8181 at Server.setupListenHandle [as _listen2] (net.js:1330:14) at listenInCluster (net.js:1378:12) at GetAddrInfoReqWrap.doListen [as callback] (net.js:1492:7) at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:55:10) errno: 'EADDRINUSE', code: 'EADDRINUSE', syscall: 'listen', address: '127.0.0.1', port: 8181 } [15:39:09.605] [LOG] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? [15:39:09.605] [LOG] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues [15:39:09.652] [LOG] Launching application. -
@bachoo786 said in Magic Mirror updated now doesnt work:
EADDRINUSE 127.0.0.1:8181
so, it looks like u have another version running,
pm2 status
pm2 stop 0then npm start
-
@sdetweil do I have to do that? I never did update the modules after I upgraded the mirror.
-
@bachoo786 said in Magic Mirror updated now doesnt work:
do I have to do that? I never did update the modules after I upgraded the mirror.
yes… if the base dependencies change, then u should update the dependencies of the modules
my automated upgrade script does all this.
-
@sdetweil nope its only one version
-
-
@sdetweil ok so what shall I do now? I am lost. I always avoid updating my magicmirror as the new update always breaks it.
-
please read my posts
do
pm2 statusif anything is running, not stopped then do
pm2 stop ?? where xx is the name or number of the item runningonce u have nothing running, then redo the npm start from the MagicMirror folder so we can diagnose the rest of the problem
-
@sdetweil ok I have done that and here is the result:
pi@raspberrypi:~/MagicMirror $ npm start > magicmirror@2.10.0 start /home/pi/MagicMirror > ./run-start.sh + ./untrack-css.sh + '[' -z '' ']' + export DISPLAY=:0 + DISPLAY=:0 ++ uname -m + arch=armv7l + false=false ++ grep -v '^\s//' config/config.js ++ grep -i serveronly: ++ awk '{print tolower($2)}' ++ tr -d ',"'\''' + serveronly= + serveronly=false ++ pgrep Xorg + xorg=519 ++ uname + mac=Linux + '[' false. '!=' false. -o armv7l == armv6l ']' + '[' 519. == . -a Linux '!=' Darwin ']' + electron js/electron.js [15:51:26.871] [LOG] Starting MagicMirror: v2.10.0 [15:51:26.879] [LOG] Loading config ... [15:51:26.884] [LOG] Loading module helpers ... [15:51:26.924] [LOG] Initializing new module helper ... [15:51:26.925] [LOG] Module helper loaded: updatenotification [15:51:26.926] [LOG] No helper found for module: clock. [15:51:27.306] [LOG] Initializing new module helper ... [15:51:27.306] [LOG] Module helper loaded: MMM-SystemStats [15:51:27.307] [LOG] No helper found for module: currentweather. [15:51:27.308] [LOG] No helper found for module: weatherforecast. [15:51:27.308] [LOG] No helper found for module: random_quotes. [15:51:27.310] [LOG] Initializing new module helper ... [15:51:27.311] [LOG] Module helper loaded: MMM-homeassistant-sensors [15:51:27.697] [LOG] Initializing new module helper ... [15:51:27.698] [LOG] Module helper loaded: MMM-UKNationalRail [15:51:27.699] [LOG] No helper found for module: MMM-TFL. [15:51:27.735] [LOG] Initializing new module helper ... [15:51:27.735] [LOG] Module helper loaded: newsfeed [15:51:27.736] [LOG] All module helpers loaded. [15:51:27.737] [LOG] Starting server on port 8181 ... [15:51:27.744] [INFO] You're using a full whitelist configuration to allow for all IPs [15:51:27.750] [LOG] Server started ... [15:51:27.751] [LOG] Connecting socket for: updatenotification [15:51:27.752] [LOG] Connecting socket for: MMM-SystemStats [15:51:27.753] [LOG] Connecting socket for: MMM-homeassistant-sensors [15:51:27.754] [LOG] Connecting socket for: MMM-UKNationalRail [15:51:27.754] [LOG] MMM-UKNationalRail helper started ... [15:51:27.755] [LOG] Connecting socket for: newsfeed [15:51:27.756] [LOG] Starting module: newsfeed [15:51:27.756] [LOG] Sockets connected & modules started ... [15:51:27.943] [LOG] Launching application. [15:51:29.943] [LOG] Create new news fetcher for url: http://feeds.bbci.co.uk/news/england/rss.xml - Interval: 300000 [15:51:29.984] [LOG] Create new news fetcher for url: http://feeds.skynews.com/feeds/rss/world.xml - Interval: 300000 -
@bachoo786 ok, so the node_helper side is working ok…
now open the developers window, ctrl-shift-i, select the console tab, and scroll up to see any errors
-
@sdetweil I dont have access to the mirror now as I am not home. The thing that stopped working was when I updated MM I cannot access it anymore remotely. Before updating mm I could as my ports are also forwarded.
-
@bachoo786 said in Magic Mirror updated now doesnt work:
The thing that stopped working was when I updated MM I cannot access it anymore remotely.
i don’t understand that. update app has nothing to do with ssh type access…
if u mean MMM-remotecontrol type access, correct, the mirror app is down for some reason… that is what we are debugging
-
from the prior message, the backend is happy (node_helpers, web server)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login