MMM-Buttons to activate MMM-Assistantmk2 (v3)

[Apartment_Moose]

@sdetweil
Thanks for getting back to me on this. I will check it out over the weekend when I next am free (probably sunday). I will report back on if this fixed it. Thanks again for the support as I couldnt find anything on google.

[sdetweil]

@Apartment_Moose i just did a search on google for “mmap Cannot allocate memory”

[Apartment_Moose]

Hi @sdetweil

thanks for the help so far, I have edited the vm map count as per the link you linked (with the 16gb used in the example)

i am still getting the same log error however

mmap() failed: Cannot allocate memory
Failed to create permanent mapping for memfd region with ID = 738611435
Ignoring received block reference with non-registered memfd ID = 738611435

any ideas as i am stumped…

[Apartment_Moose]

@sdetweil

I seem to have fixed the issue by switching everything to my raspberry 4.
didn’t look like the 3 b+ could handle it for some reason and now it is all working.
thank you for your help, it was greatly appreciated!

@Sean

quick one for you if you don’t, (after upgrading to 3.0.1) When i speak a command and it responds, the google wheel continues to spin as per the picture. (log file doesn’t do anything unless i press the button to activate again)

is this normal? or should it return to the floating bubbles?
also, log files show after any open questions such as “hello google” its status goes to standby after responding with the log showing the continue line on set to “false”.

if i press the button and dont say anything, then it resets due to the timer setting.

[A Former User]

@Apartment_Moose
We found some issues under specific condition about memory shortage. so we are trying another approach to use smaller memory. wait a while. sorry.

[Apartment_Moose]

@Sean

thanks for the response :) i will close this as solve for now.
thank you