Currentweather,doesn't appear.

[broberg]

The only thing that I see wrong is that the position doesn’t exist.

These are the positions that you can choose from :

top_bar, top_left, top_center, top_right, upper_third, middle_center, lower_third, bottom_left, bottom_center, bottom_right, bottom_bar, fullscreen_above, and fullscreen_below

A reference for the positions (regions) can be found here :
https://forum.magicmirror.builders/topic/286/regions/2

[A Former User]

There is no center_right position.

Read about regions here: https://forum.magicmirror.builders/topic/286/regions

[samson_82]

Changed it to bottom_right.
doesn’t appear.

there is no error message or anything else

[broberg]

@samson_82

I tested this with my mirror (2.9.0)

{
	module: "currentweather",
	position: "bottom_right",
	config: {
	location: "Alzey,Germany",
	locationID: "2956710",
	appid: "my api code",
			}
},

And had no issues, Double check your API code and the Mirrors internet connection.

[samson_82]

The raspberry is connected to the internet by cable

I have replaced the ID with XXXX.
In the config I have it.

Everything works, only the module does not want to

[samson_82]

so. I was able to fix the problem.
an error must have crept in during installation.
once ran over the upgrade bash.

bash -c “$ (curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)” force

After a new installation of the basic modules, the weather module now works correctly.