MagicMirror project for sister

banbutcher

hi again,

loking at your video and i was wondering how you got hotword or assistant to show the speech to txt? with mine i say the hotword followed by command which brings up the assistant rather than automatically onsceen like yours. i hope this makes sense to you!

Richie

blaukon

@banbutcher hey, I’m using Version 2 from https://github.com/eouia/MMM-AssistantMk2 and the newest version of https://github.com/eouia/MMM-Hotword. Removed the presence on the mirror of both when nothing is decected and I belive that’s all I’ve changed :)

bachoo786

@blaukon hey well done man. Amazing job.
Please help me understand the following:

how did you attach the monitor and the mirror together?
How did you hold the monitor to the frame?
Is the frame strong enough to hold the mirror and the monitor?
Thanks.

blaukon

@bachoo786
sadly, I do not have more pictures or access to the mirror at the moment - alt text

But I made 3d modell in tinkercad to show you the necessary construction:

front:
alt text
-> orange: mirrorglass (bigger than the hole)

-> monitor right onto the glass
alt text

backside:
alt text

the frame is massiv, about 2-2.5cm wood, I have absolutly no worries that this frame would brake by itself :)
and that’s basically how it’s mounted:
alt text

thoeng

Hi, I have seen the video and its great work.

I have similar setup with yours i.e.: AssistantMK2 and Kinobo USB mic (not Akiro but that mini USB one) and it is nowhere as sensitive as yours. I have to speak almost next to the microphone for the hotword to activate AssistantMK2. This reduce the mirror usability considerably.

Can you please let me know what you have done to increase the sensitivity? so far, I have increased mic to max sensitivity with ALSA mixer but still nowhere near yours.

Regards,

blaukon

hi, all I did is to set a higher but not too high sensitivity via alsa mixer or on desktop - right click on audio - audio input - input device settings and adjust the sesitivity:
alt text

did you test your mic? arecord test.wav -> aplay test.wav?

thoeng

Thanks @blaukon

Yes, i tried to raise the sensitivity via UI and Terminal. Volume from arecord is still very low.

If I replace the mic, is it direct replacement or any configuration required?

blaukon

if your recoding is still quiet, even when you’ve raised the sensitivity, it’s mostlikly your microphone :/
I’ve bought this one https://www.amazon.de/Kinobo-Mini-Akiro-Mikrofon-Windows/dp/B00NSOWWIS
and also one that looked like 99% the same, was cheaper, but wayyy worse in comparison.

amsuvarna27

@blaukon I’m doing also same project.
Sir can you please share the Back up file of this project.
I’m trying from last 3 months but unable to complete.
Please share with me.

thoeng

@blaukon yep its definetely the mic. I will change and reply back.

Thanks!