A New Chapter for MagicMirror: The Community Takes the Lead
Read the statement by Michael Teeuw here.
Read the statement by Michael Teeuw here.
Need Help - Absolute Beginner - Code Posted!
-
@bumrocks as I said, nothing u can do… u can run audit fix, and u might get better, or might end with it not running…
many of the ‘fixes’ require breaking changes…
-
@sdetweil
Thank you for such a quick response! Going by magicmirrors.builders installation guidelines I was scared out of using any scripts and opted to go the manual route as it was the only way that was technically supported, at least by Michael and his “team”…At this point are you recommending I wipe my current install and use the script you recommend? Does it include Node v10 and I therefore need to wipe it too? -
@bumrocks my scripts are listed as ‘alternative’ right below
it also uses node 10, and would have installed for you … also fixes some odds and ends
you can go ahead, or rename you magicmirror folder to some other name and run the script…
it will also setup pm2 for restart after boot and disable screensaver (if u say yes at the respective prompts)Alternative Installation Methods The following installation methods are not maintained by the MagicMirror² core team. Use these scripts and methods at your own risk. #Automatic Installation Scripts Sam (@sdetweil, long time contributor of the MagicMirror² framework) maintains a easy to use installation and update script: https://github.com/sdetweil/MagicMirror_scripts -
Good looking out! And yes, I saw where you were listed as an alternate “authorized” way to install but let the “manual” message put the grip of fear on me, lol! I will do as you suggested and appreciate the help and tips!
-
vulnerabilities aren’t to be worried about if the project isn’t going to peek out to the internet.
-
@BKeyport
Which makes perfect sense but I am unclear what exactly might be peeking out if it connects to Internet for calendar stuff (intend to connect Google Calendar), updates for weather, Youtube module, and Amazon Alexa (if module is available)…I assume that all of these are in some way peeking and that most Magic Mirrors do in various ways. But, I am just a noob and can not say with any certainty. At the least, it is a daunting statement using the word “vulnerabilities”.Let me also add, it is quite confusing that the developer and his team recommend doing the manual install but leave out such specifics and how to handle them when they arise. I am not the first or last person to make this attempt with a Rasberry Pi 4 and with me following the directions given within the terminal I still end up with…
fixed 15 of 20 vulnerabilities in 1052 scanned packages 3 vulnerabilities required manual review and could not be updated 2 package updates for 2 vulnerabilities involved breaking changes (use `npm audit fix --force` to install breaking changes; or refer to `npm audit` for steps to fix these manually)Which absolutely leaves a noob such as I in a state of confusion as to what to do. Continuing on and leaving that by the wayside I get to the configuration of the config file and low and behold things that the instructions say I can alter or change are not available at all…zoom, electronOptions, & customCss are nonexistent from my config file. I see great care to help absolute beginners in various ways but some of the most basic instructions are either wrong or completely missing. I am thankful, do not get me wrong, for this site, this app, the developers, the input, etc. Figuring out stuff on my own will help me retain the knowledge and only better me in the future but I can’t help but feel bad for those that are less computer savvy as an absolute beginner. Sorry for my slight rant! Not sure why I started on it but my intention is not to be a negative dick. I have spent way more hours and $ on this project that I originally planned or anticipated as I assumed wrongfully that this would be easy. Nobody’s fault but my own.
-
@bumrocks they CAN be altered, but are not there by default… yes, you have to discover them , if u have the need
as for the issues and vulnerabilities, they are not in the MM code, but code it uses and that those use… where the MM owners have little to no control (or exposure to the problem)
but many of the issues you present are why I built up the installer and updater scripts, to get you up and running, regardless of your platform choice
this remains a volunteer project, where, if u are interested you can contribute. It is NOT a ‘product’
-
@bumrocks In this case, if it’s not serving anything to the public, it’s generally fine. Grabbing things off the internet is usually fine… so, as long as you’re just grabbing things from the net, and it’s webports are not outside, you’re golden.
-
@sdetweil Thank you for your response again. In my frustration I took a few days off and am now trying back at it…As far it not being a product and contributing, I understand very well and in what may be a feeble attempt did make remarks and suggestions for changes in a branch? off of the directions to include and/or remove certain information. On the Internet people can say or claim what they want whether truth or not but my intention is to not simply take what I can. I intend to contribute however I might, even if it is just monetarily. Unfortunately, I have not gotten very far and am still trying to figure out why.
In trying to simplify my life, I did as you suggested, changed the MagicMirror directory name and then tried an install from your script. After running the primary command
curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.shI end up with a bunch of return code that ends with this (let me know if you need the full code it gives back)…
t -dpms else echo "lxsession screen saver already disabled" >> $logfile fi fi fi fi echo " " if [ $pm2setup -eq $true ]; then rmessage="pm2 start MagicMirror" else rmessage="DISPLAY=:0 npm start" fi echo -e "\e[92mWe're ready! Run \e[1m\e[97m$rmessage\e[0m\e[92m from the ~/MagicMirror directory to start your MagicMirror.\e[0m" | tee -a $logfile echo " " echo " " date +"install completed - %a %b %e %H:%M:%S %Z %Y" >>$logfile pi@MagicMirror2:~ $It takes a matter of seconds to return all this and therefore is evident that nothing actually was installed. To confirm I have no new MagicMirror folder in my system, at least that I can find. Not within the /home/pi folder nor further back within the root directory. So I am at a loss as to what I now need to do. I tried running some other command but it also told me that Magic Mirror was not installed…
echo echo or git stash pop to restore them all echo echo WARNING.. echo WARNING.. either will overlay the file just installed by the update echo WARNING.. if [ $set_username == $true ]; then git config --global --unset user.name >>/$logfile git config --global --unset user.email >>/$logfile fi fi fi # return to original folder cd - >/dev/null date +"Upgrade ended - %a %b %e %H:%M:%S %Z %Y" >>$logfile else echo It appears MagicMirror has not been installed on this system echo please run the installer, "raspberry.sh" first fiThank you for your time and assistance in the matter. I have no issue starting from scratch if needed. Please advise :exploding_head:
@BKeyport Understood…Makes sense and thank you! I feel a bit better now!
-
Here is the full code as it is returned to me…
pi@MagicMirror2:~ $ curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh #!/bin/bash # This is an installer script for MagicMirror2. It works well enough # that it can detect if you have Node installed, run a binary script # and then download and run MagicMirror2. if [ $USER == 'root' ]; then echo Please login as a user to execute the MagicMirror installation, not root exit 1 fi echo -e "\e[0m" echo '$$\ $$\ $$\ $$\ $$\ $$\ $$$$$$\' echo '$$$\ $$$ | \__| $$$\ $$$ |\__| $$ __$$\' echo '$$$$\ $$$$ | $$$$$$\ $$$$$$\ $$\ $$$$$$$\ $$$$\ $$$$ |$$\ $$$$$$\ $$$$$$\ $$$$$$\ $$$$$$\ \__/ $$ |' echo '$$\$$\$$ $$ | \____$$\ $$ __$$\ $$ |$$ _____|$$\$$\$$ $$ |$$ |$$ __$$\ $$ __$$\ $$ __$$\ $$ __$$\ $$$$$$ |' echo '$$ \$$$ $$ | $$$$$$$ |$$ / $$ |$$ |$$ / $$ \$$$ $$ |$$ |$$ | \__|$$ | \__|$$ / $$ |$$ | \__|$$ ____/' echo '$$ |\$ /$$ |$$ __$$ |$$ | $$ |$$ |$$ | $$ |\$ /$$ |$$ |$$ | $$ | $$ | $$ |$$ | $$ |' echo '$$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ | $$ | \$$$$$$ |$$ | $$$$$$$$\' echo '\__| \__| \_______| \____$$ |\__| \_______|\__| \__|\__|\__| \__| \______/ \__| \________|' echo ' $$\ $$ |' echo ' \$$$$$$ |' echo ' \______/' echo -e "\e[0m" doInstall=1 true=1 false=0 # Define the tested version of Node.js. NODE_TESTED="v10.1.0" NPM_TESTED="V6.0.0" USER=`whoami` PM2_FILE=pm2_MagicMirror.json forced_arch= pm2setup=$false trim() { local var="$*" # remove leading whitespace characters var="${var#"${var%%[![:space:]]*}"}" # remove trailing whitespace characters var="${var%"${var##*[![:space:]]}"}" echo -n "$var" } cd $HOME mac=$(uname -s) if [ 0 -eq 1 ]; then if [ "$0" == "bash" ]; then logdir=. else if [ $mac == 'Darwin' ]; then echo this is a mac >> $logfile logdir=$(dirname "$0") else # put the log where the script is located logdir=$(dirname $(readlink -f "$0")) fi fi # if the script was execute from the web if [[ $logdir != *"MagicMirror/installers"* ]]; then # use the MagicMirror/installers folder, if setup if [ -d MagicMirror ]; then cd ~/MagicMirror/installers >/dev/null logdir=$(pwd) cd - >/dev/null else # use the users home folder if initial install logdir=$HOME fi fi fi logfile=$HOME/install.log echo install log being saved to $logfile # Determine which Pi is running. date +"install starting - %a %b %e %H:%M:%S %Z %Y" >>$logfile ARM=$(uname -m) echo installing on $ARM processor system >>$logfile echo the os is $(lsb_release -a 2>/dev/null) >> $logfile OS=$(lsb_release -a 2>/dev/null | grep name: | awk '{print $2}') # Check the Raspberry Pi version. if [ "$ARM" != "armv7l" ]; then read -p "this appears not to be a Raspberry Pi 2 or 3, do you want to continue installation (y/N)?" choice choice="${choice:-N}" if [[ $choice =~ ^[Nn]$ ]]; then echo user stopped install on $ARM hardware >>$logfile echo -e "\e[91mSorry, your Raspberry Pi is not supported." echo -e "\e[91mPlease run MagicMirror on a Raspberry Pi 2 or 3." echo -e "\e[91mIf this is a Pi Zero, the setup will configure to run in server only mode wih a local browser." exit; fi fi # Define helper methods. function command_exists () { type "$1" &> /dev/null ;} function verlte() { [ "$1" = "`echo -e "$1\n$2" | sort -V | head -n1`" ];} function verlt() { [ "$1" = "$2" ] && return 1 || verlte $1 $2 ;} # Update before first apt-get if [ $mac != 'Darwin' ]; then echo -e "\e[96mUpdating packages ...\e[90m" | tee -a $logfile upgrade=$false update=$(sudo apt-get update 2>&1) # sudo apt-get update --allow-releaseinfo-change echo $update >> $logfile update_rc=$? if [ $(echo $update | grep -i "is not valid yet" | wc -l) -ne 0 ]; then echo -e "\e[91mSystem date/time is in the past, please correct ...\e[90m" | tee -a $logfile exit 1 fi if [ $update_rc -ne 0 ]; then echo -e "\e[91mUpdate failed, retrying installation ...\e[90m" | tee -a $logfile if [ $(echo $update | grep "apt-secure" | wc -l) -eq 1 ]; then update=$(sudo apt-get update --allow-releaseinfo-change 2>&1) update_rc=$? echo $update >> $logfile if [ $update_rc -ne 0 ]; then echo "second apt-get update failed" $update | tee -a $logfile exit 1 else echo "second apt-get update completed ok" >> $logfile upgrade=$true fi fi else echo "apt-get update completed ok" >> $logfile upgrade=$true fi if [ $upgrade -eq $true ]; then echo "apt-get upgrade started" >> $logfile upgrade_result=$(sudo apt-get --assume-yes upgrade 2>&1) upgrade_rc=$? echo apt upgrade result ="rc=$upgrade_rc $upgrade_result" >> $logfile fi # Installing helper tools echo -e "\e[96mInstalling helper tools ...\e[90m" | tee -a $logfile sudo apt-get --assume-yes install curl wget git build-essential unzip >>$logfile fi # Check if we need to install or upgrade Node.js. echo -e "\e[96mCheck current Node installation ...\e[0m" | tee -a $logfile NODE_INSTALL=false if command_exists node; then echo -e "\e[0mNode currently installed. Checking version number." | tee -a $logfile NODE_CURRENT=$(node -v) if [ "$NODE_CURRENT." == "." ]; then NODE_CURRENT="V1.0.0" echo forcing low Node version >> $logfile fi echo -e "\e[0mMinimum Node version: \e[1m$NODE_TESTED\e[0m" | tee -a $logfile echo -e "\e[0mInstalled Node version: \e[1m$NODE_CURRENT\e[0m" | tee -a $logfile if verlte $NODE_CURRENT $NODE_TESTED; then echo -e "\e[96mNode should be upgraded.\e[0m" | tee -a $logfile NODE_INSTALL=true # Check if a node process is currenlty running. # If so abort installation. if pgrep "node" > /dev/null; then echo -e "\e[91mA Node process is currently running. Can't upgrade." | tee -a $logfile echo "Please quit all Node processes and restart the installer." | tee -a $logfile echo $(ps -ef | grep node | grep -v \-\-color) | tee -a $logfile exit; fi else echo -e "\e[92mNo Node.js upgrade necessary.\e[0m" | tee -a $logfile fi else echo -e "\e[93mNode.js is not installed.\e[0m" | tee -a $logfile NODE_INSTALL=true fi # Install or upgrade node if necessary. if $NODE_INSTALL; then echo -e "\e[96mInstalling Node.js ...\e[90m" | tee -a $logfile # Fetch the latest version of Node.js from the selected branch # The NODE_STABLE_BRANCH variable will need to be manually adjusted when a new branch is released. (e.g. 7.x) # Only tested (stable) versions are recommended as newer versions could break MagicMirror. if [ $mac == 'Darwin' ]; then brew install node else NODE_STABLE_BRANCH="10.x" # sudo apt-get install --only-upgrade libstdc++6 node_info=$(curl -sL https://deb.nodesource.com/setup_$NODE_STABLE_BRANCH | sudo -E bash - ) echo Node release info = $node_info >> $logfile if [ "$(echo $node_info | grep "not currently supported")." == "." ]; then sudo apt-get install -y nodejs else echo node $NODE_STABLE_BRANCH version installer not available, doing manually >>$logfile # no longer supported install sudo apt-get install -y --only-upgrade libstdc++6 >> $logfile # have to do it manually node_vnum=$(echo $NODE_STABLE_BRANCH | awk -F. '{print $1}') # get the highest release number in the stable branch line for this processor architecture node_ver=$(curl -sL https://unofficial-builds.nodejs.org/download/release/index.tab | grep $ARM | grep -m 1 v$node_vnum | awk '{print $1}') echo "latest release in the $NODE_STABLE_BRANCH family for $ARM is $node_ver" >> $logfile curl -sL https://unofficial-builds.nodejs.org/download/release/$node_ver/node-$node_ver-linux-$ARM.tar.gz >node_release-$node_ver.tar.gz cd /usr/local echo using release tar file = node_release-$node_ver.tar.gz >> $logfile sudo tar --strip-components 1 -xzf $HOME/node_release-$node_ver.tar.gz cd - >/dev/null rm ./node_release-$node_ver.tar.gz fi # get the new node version number new_ver=$(node -v 2>&1) # if there is a failure to get it due to a missing library if [ $(echo $new_ver | grep "not found" | wc -l) -ne 0 ]; then # sudo apt-get install -y --only-upgrade libstdc++6 >> $logfile fi echo node version is $(node -v 2>&1 >>$logfile) fi echo -e "\e[92mNode.js installation Done! version=$(node -v)\e[0m" | tee -a $logfile fi # Check if we need to install or upgrade npm. echo -e "\e[96mCheck current NPM installation ...\e[0m" | tee -a $logfile NPM_INSTALL=false if command_exists npm; then echo -e "\e[0mNPM currently installed. Checking version number." | tee -a $logfile NPM_CURRENT='V'$(npm -v) echo -e "\e[0mMinimum npm version: \e[1m$NPM_TESTED\e[0m" | tee -a $logfile echo -e "\e[0mInstalled npm version: \e[1m$NPM_CURRENT\e[0m" | tee -a $logfile if verlte $NPM_CURRENT $NPM_TESTED; then echo -e "\e[96mnpm should be upgraded.\e[0m" | tee -a $logfile NPM_INSTALL=true # Check if a node process is currently running. # If so abort installation. if pgrep "npm" > /dev/null; then echo -e "\e[91mA npm process is currently running. Can't upgrade." | tee -a $logfile echo "Please quit all npm processes and restart the installer." | tee -a $logfile exit; fi else echo -e "\e[92mNo npm upgrade necessary.\e[0m" | tee -a $logfile fi else echo -e "\e[93mnpm is not installed.\e[0m" | tee -a $logfile NPM_INSTALL=true fi # Install or upgrade node if necessary. if $NPM_INSTALL; then echo -e "\e[96mInstalling npm ...\e[90m" | tee -a $logfile # Fetch the latest version of npm from the selected branch # The NODE_STABLE_BRANCH variable will need to be manually adjusted when a new branch is released. (e.g. 7.x) # Only tested (stable) versions are recommended as newer versions could break MagicMirror. #NODE_STABLE_BRANCH="9.x" #curl -sL https://deb.nodesource.com/setup_$NODE_STABLE_BRANCH | sudo -E bash - # # if this is a mac, npm was installed with node if [ $mac != 'Darwin' ]; then sudo apt-get install -y npm >>$logfile fi # update to the latest. echo upgrading npm to latest >> $logfile sudo npm i -g npm >>$logfile echo -e "\e[92mnpm installation Done! version=V$(npm -v)\e[0m" | tee -a $logfile fi # Install MagicMirror cd ~ if [ $doInstall == 1 ]; then if [ -d "$HOME/MagicMirror" ] ; then echo -e "\e[93mIt seems like MagicMirror is already installed." | tee -a $logfile echo -e "To prevent overwriting, the installer will be aborted." | tee -a $logfile echo -e "Please rename the \e[1m~/MagicMirror\e[0m\e[93m folder and try again.\e[0m" | tee -a $logfile echo "" echo -e "If you want to upgrade your installation run \e[1m\e[97mupgrade-script\e[0m from the ~/MagicMirror/installers directory." | tee -a $logfile echo "" exit; fi echo -e "\e[96mCloning MagicMirror ...\e[90m" | tee -a $logfile if git clone --depth=1 https://github.com/MichMich/MagicMirror.git; then echo -e "\e[92mCloning MagicMirror Done!\e[90m" | tee -a $logfile # replace faulty run-start.sh curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/run-start.sh >MagicMirror/run-start.sh chmod +x MagicMirror/run-start.sh else echo -e "\e[91mUnable to clone MagicMirror. \e[90m" | tee -a $logfile exit; fi cd ~/MagicMirror || exit if [ $(grep version package.json | awk -F: '{print $2}') == '"2.9.0",' -a $ARM == 'armv6l' ]; then git fetch https://github.com/MichMich/MagicMirror.git develop >/dev/null 2>&1 git branch develop FETCH_HEAD > /dev/null 2>&1 git checkout develop > /dev/null 2>&1 fi # if this is v 2.11 or higher newver=$(grep -i version package.json | awk -F\" '{ print $4 }') if verlte "2.11.0" $newver; then # if one of the older devices, fix the start script to execute in serveronly mode if [ "$ARM" == "armv6l" ]; then # fixup the start script sed '/start/ c \ "start\"\:\"./run-start.sh $1\",' < package.json >new_package.json if [ -s new_package.json ]; then cp new_package.json package.json rm new_package.json echo "package.json update for armv6l completed ok" >>$logfile else echo "package.json update for armv6l failed " >>$logfile fi curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/run-start.sh >run-start.sh chmod +x run-start.sh elif [ "$ARM" == "x86_64" -a "$OS" == 'buster' ]; then cd fonts sed '/roboto-fontface/ c \ "roboto-fontface": "latest"' < package.json >new_package.json if [ -s new_package.json ]; then cp new_package.json package.json rm new_package.json echo "package.json update for x86 fontface completed ok" >>$logfile fi cd - elif [ $mac == 'Darwin' ]; then rm vendor/package-lock.json echo "erase vendor package-lock.json to allow later nan/fsevents install on mac" >>$logfile fi fi if [ ! -e css/custom.css ]; then touch css/custom.css fi echo -e "\e[96mInstalling dependencies ...\e[90m" | tee -a $logfile rm package-lock.json 2>/dev/null npm_i_r=$(npm install $forced_arch --only=prod) npm_i_rc=$? if [ $newver == '2.11.0' ]; then # fixup missing eslint (in dev dependencies) npm install eslint >>$logfile fi if [ $npm_i_rc -eq 0 ]; then echo -e "\e[92mDependencies installation Done!\e[90m" | tee -a $logfile else if [ $(echo $npm_i_r | grep "CERT_NOT_YET_VALID" | wc -l) -ne 0 ]; then echo "\e[91mSystem date/time is in the past, please correct \e[90m" | tee -a $logfile fi echo -e "\e[91mUnable to install dependencies! \e[90m" | tee -a $logfile exit; fi # fixup permissions on sandbox file if it exists if [ -f node_modules/electron/dist/chrome-sandbox ]; then echo "fixing sandbox permissions" >>$logfile sudo chown root node_modules/electron/dist/chrome-sandbox 2>/dev/null sudo chmod 4755 node_modules/electron/dist/chrome-sandbox 2>/dev/null fi # if this an armv6l device (pi 0/1) # if [ $ARM == 'armv6l' ]; then # # if this is the updated release # if ! verlt $(grep -i version package.json | awk -F\" '{ print $4 }') 2.10; then # # replace the start command with the old one # grep -v start package.json | sed '/"scripts": {/a \ \ \ \ "start":\ "bash run-start.sh",' >package.json # fi # fi # Use sample config for start MagicMirror echo setting up initial config.js | tee -a $logfile cp config/config.js.sample config/config.js fi # Check if plymouth is installed (default with PIXEL desktop environment), then install custom splashscreen. echo -e "\e[96mCheck plymouth installation ...\e[0m" | tee -a $logfile if command_exists plymouth; then THEME_DIR="/usr/share/plymouth/themes" echo -e "\e[90mSplashscreen: Checking themes directory.\e[0m" | tee -a $logfile if [ -d $THEME_DIR ]; then echo -e "\e[90mSplashscreen: Create theme directory if not exists.\e[0m" | tee -a $logfile if [ ! -d $THEME_DIR/MagicMirror ]; then sudo mkdir $THEME_DIR/MagicMirror fi if sudo cp ~/MagicMirror/splashscreen/splash.png $THEME_DIR/MagicMirror/splash.png && sudo cp ~/MagicMirror/splashscreen/MagicMirror.plymouth $THEME_DIR/MagicMirror/MagicMirror.plymouth && sudo cp ~/MagicMirror/splashscreen/MagicMirror.script $THEME_DIR/MagicMirror/MagicMirror.script; then echo if [ "$(which plymouth-set-default-theme)." != "." ]; then if sudo plymouth-set-default-theme -R MagicMirror; then echo -e "\e[92mSplashscreen: Changed theme to MagicMirror successfully.\e[0m" | tee -a $logfile else echo -e "\e[91mSplashscreen: Couldn't change theme to MagicMirror!\e[0m" | tee -a $logfile fi fi else echo -e "\e[91mSplashscreen: Copying theme failed!\e[0m" | tee -a $logfile fi else echo -e "\e[91mSplashscreen: Themes folder doesn't exist!\e[0m" | tee -a $logfile fi else echo -e "\e[93mplymouth is not installed.\e[0m" | tee -a $logfile fi # Use pm2 control like a service MagicMirror read -p "Do you want use pm2 for auto starting of your MagicMirror (y/N)?" choice choice="${choice:-N}" if [[ $choice =~ ^[Yy]$ ]]; then echo install and setup pm2 | tee -a $logfile # assume pm2 will be found on the path pm2cmd=pm2 # check to see if already installed pm2_installed=$(which $pm2cmd) up="" if [ $mac == 'Darwin' ]; then up="--unsafe-perm" launchctl=launchctl launchctl_path=$(which $launchctl) `export PATH=$PATH:${launchctl_path%/$launchctl}` fi # check to see if already installed pm2_installed=$(which $pm2cmd) if [ "$pm2_installed." != "." ]; then # does it work? pm2_fails=$(pm2 list | grep -i -m 1 "uptime" | wc -l ) if [ $pm2_fails != 1 ]; then # uninstall it echo pm2 installed, but does not work, uninstalling >> $logfile sudo npm uninstall $up -g pm2 >> $logfile # force reinstall pm2_installed= fi fi # if not installed if [ "$pm2_installed." == "." ]; then # install it. echo pm2 not installed, installing >>$logfile result=$(sudo npm install $up -g pm2 2>&1) echo pm2 install result $result >>$logfile # if this is a mac if [ $mac == 'Darwin' ]; then echo "this is a mac, fixup for path" >>$logfile # get the location of pm2 install # parse the npm install output to get the command pm2cmd=`echo $result | awk -F - '{print $1}' | tr -d '[:space:]'` c='/pm2' # get the path only echo ${pm2cmd%$c} >installers/pm2path fi fi echo "get the pm2 platform specific startup command" >>$logfile # get the platform specific pm2 startup command v=$($pm2cmd startup | tail -n 1) if [ $mac != 'Darwin' ]; then # check to see if we can get the OS package name (Ubuntu) if [ $(which lsb_release| wc -l) >0 ]; then # fix command # if ubuntu 18.04, pm2 startup gets something wrong if [ $(lsb_release -r | grep -m1 18.04 | wc -l) > 0 ]; then v=$(echo $v | sed 's/\/bin/\/bin:\/bin/') fi fi fi echo "startup command = $v" >>$logfile # execute the command returned $v 2>&1 >>$logfile echo "pm2 startup command done" >>$logfile # is this is mac # need to fix pm2 startup, only on catalina if [ $mac == 'Darwin' ]; then if [ $(sw_vers -productVersion | head -c 6) == '10.15.' ]; then # only do if the faulty tag is present (pm2 may fix this, before the script is fixed) if [ $(grep -m 1 UserName /Users/$USER/Library/LaunchAgents/pm2.$USER.plist | wc -l) -eq 1 ]; then # copy the pm2 startup file config cp /Users/$USER/Library/LaunchAgents/pm2.$USER.plist . # edit out the UserName key/value strings sed -e '/UserName/{N;d;}' pm2.$USER.plist > pm2.$USER.plist.new # copy the file back sudo cp pm2.$USER.plist.new /Users/$USER/Library/LaunchAgents/pm2.$USER.plist fi fi fi # if the user is no pi, we have to fixup the pm2 json file echo "configure the pm2 config file for MagicMirror" >>$logfile # if the files we need aren't here, get them if [ ! -e installers/pm2_MagicMirror.json ]; then curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/pm2_MagicMirror.json >installers/pm2_MagicMirror.json curl -sl https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/mm.sh >installers/mm.sh chmod +x installers/mm.sh fi if [ "$USER" != "pi" ]; then echo the user is not pi >>$logfile # go to the installers folder cd installers # edit the startup script for the right user echo change mm.sh >>$logfile if [ ! -e mm_temp.sh ]; then echo save copy of mm.sh >> $logfile cp mm.sh mm_temp.sh fi if [ $(grep pi mm_temp.sh | wc -l) -gt 0 ]; then echo change hard coded pi username >> $logfile sed 's/pi/'$USER'/g' mm_temp.sh >mm.sh else echo change relative home path to hard coded path >> $logfile hf=$(echo $HOME |sed 's/\//\\\//g') sed 's/\~/'$hf'/g' mm_temp.sh >mm.sh fi # edit the pms config file for the right user echo change $PM2_FILE >>$logfile sed 's/pi/'$USER'/g' $PM2_FILE > pm2_MagicMirror_new.json # make sure to use the updated file PM2_FILE=pm2_MagicMirror_new.json # if this is a mac if [ $mac == 'Darwin' ]; then # copy the path file to the system paths list sudo cp ./pm2path /etc/paths.d # change the name of the home path for mac sed 's/home/Users/g' $PM2_FILE > pm2_MagicMirror_new1.json # make sure to use the updated file PM2_FILE=pm2_MagicMirror_new1.json fi echo now using this config file $PM2_FILE >>$logfile # go back one cd level cd - >/dev/null fi echo start MagicMirror via pm2 now >>$logfile # tell pm2 to start the app defined in the config file $pm2cmd start $HOME/MagicMirror/installers/$PM2_FILE # tell pm2 to save that configuration, for start at boot echo save MagicMirror pm2 config now >>$logfile $pm2cmd save echo stop MagicMirror via pm2 now >>$logfile #$pm2cmd stop MagicMirror pm2setup=$true fi # Disable Screensaver read -p "Do you want to disable the screen saver? (y/N)?" choice choice="${choice:-Y}" if [[ $choice =~ ^[Yy]$ ]]; then # if this is a mac if [ $mac == 'Darwin' ]; then # get the current setting setting=$(defaults -currentHost read com.apple.screensaver idleTime) # if its on if [ "$setting" != 0 ] ; then # turn it off echo disable screensaver via mac profile >> $logfile defaults -currentHost write com.apple.screensaver idleTime 0 else echo mac profile screen saver already disabled >> $logfile fi else # find out if some screen saver running # get just the running processes and args # just want the program name (1st token) # find the 1st with 'saver' in it (should only be one) # parse with path char, get the last field ( the actual pgm name) screen_saver_running=$(ps -A -o args | awk '{print $1}' | grep -m1 [s]aver | awk -F\/ '{print $NF}'); # if we found something if [ "$screen_saver_running." != "." ]; then # some screensaver running case "$screen_saver_running" in mate-screensaver) echo 'mate screen saver' >>$logfile gsettings set org.mate.screensaver lock-enabled false 2>/dev/null gsettings set org.mate.screensaver idle-activation-enabled false 2>/dev/null gsettings set org.mate.screensaver lock_delay 0 2>/dev/null echo " $screen_saver_running disabled" >> $logfile DISPLAY=:0 mate-screensaver >/dev/null 2>&1 & ;; gnome-screensaver) echo 'gnome screen saver' >>$logfile gnome_screensaver-command -d >/dev/null 2>&1 echo " $screen_saver_running disabled" >> $logfile ;; xscreensaver) echo 'xscreensaver running' | tee -a $logfile xsetting=$(grep -m1 'mode:' ~/.xscreensaver ) if [ $(echo $xsetting | awk '{print $2}') != 'off' ]; then sed -i "s/$xsetting/mode: off/" "$HOME/.xscreensaver" echo " xscreensaver set to off" >> $logfile else echo " xscreensaver already disabled" >> $logfile fi ;; gsd-screensaver | gsd-screensaver-proxy) setting=$(gsettings get org.gnome.desktop.screensaver lock-enabled 2>/dev/null) setting1=$(gsettings get org.gnome.desktop.session idle-delay 2>/dev/null) if [ "$setting. $setting1." != '. .' ]; then if [ "$setting $setting1" != 'false uint32 0' ]; then echo "disable screensaver via gsettings was $setting and $setting1" >> $logfile gsettings set org.gnome.desktop.screensaver lock-enabled false gsettings set org.gnome.desktop.screensaver idle-activation-enabled false gsettings set org.gnome.desktop.session idle-delay 0 else echo "gsettings screen saver already disabled" >> $logfile fi fi ;; *) echo "some other screensaver $screen_saver_running" found | tee -a $logfile echo "please configure it manually" | tee -a $logfile ;; esac fi if [ $(which gsettings | wc -l) == 1 ]; then setting=$(gsettings get org.gnome.desktop.screensaver lock-enabled 2>/dev/null) setting1=$(gsettings get org.gnome.desktop.session idle-delay 2>/dev/null) if [ "$setting. $setting1." != '. .' ]; then if [ "$setting $setting1" != 'false uint32 0' ]; then echo "disable screensaver via gsettings was $setting and $setting1">> $logfile gsettings set org.gnome.desktop.screensaver lock-enabled false gsettings set org.gnome.desktop.screensaver idle-activation-enabled false gsettings set org.gnome.desktop.session idle-delay 0 else echo "gsettings screen saver already disabled" >> $logfile fi fi fi if [ -e "/etc/lightdm/lightdm.conf" ]; then # if screen saver NOT already disabled? if [ $(grep 'xserver-command=X -s 0 -dpms' /etc/lightdm/lightdm.conf | wc -l) == 0 ]; then echo "disable screensaver via lightdm.conf" >> $logfile sudo sed -i '/^\[Seat:/a xserver-command=X -s 0 -dpms' /etc/lightdm/lightdm.conf else echo "screensaver via lightdm already disabled" >> $logfile fi fi if [ -d "/etc/xdg/lxsession/LXDE-pi" ]; then currently_set=$(grep -m1 '\-dpms' /etc/xdg/lxsession/LXDE-pi/autostart) if [ "$currently_set." == "." ]; then echo "disable screensaver via lxsession" >> $logfile # turn it off for the future sudo su -c "echo -e '@xset s noblank\n@xset s off\n@xset -dpms' >> /etc/xdg/lxsession/LXDE-pi/autostart" # turn it off now export DISPLAY=:0; xset s noblank;xset s off;xset -dpms else echo "lxsession screen saver already disabled" >> $logfile fi fi fi fi echo " " if [ $pm2setup -eq $true ]; then rmessage="pm2 start MagicMirror" else rmessage="DISPLAY=:0 npm start" fi echo -e "\e[92mWe're ready! Run \e[1m\e[97m$rmessage\e[0m\e[92m from the ~/MagicMirror directory to start your MagicMirror.\e[0m" | tee -a $logfile echo " " echo " " date +"install completed - %a %b %e %H:%M:%S %Z %Y" >>$logfile pi@MagicMirror2:~ $
