Transit module stopped working

[nipper2000h]

@elliob

Thanks for the reply. I guess it’s nice knowing I’m not the only one having trouble. Did you just install it or were you using it beforehand?

Here’s this project’s config for whatever it’s worth.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	timeFormat: 12,
	units: "imperial",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar_monthly",
			position: "top_left",
			config: {
				// The config property is optional
				// Without a config, a default month view is shown
				// Please see the 'Configuration Options' section for more information
			}
		},
		{
			module: "MMM-TimeTreeEvent",//Positions of *_bar and *_third are not support.
			position: "top_left",
			config: {
				appid: "calendarapi",//You need to get the target calender id with Get calender id api[1]
				calenderid: "calendarid",
			}
		},
		{
			module: "MMM-Events",
			position: "top_left",
			config: {
				city: "New York",// Your City
				eventType: "performing_arts,conference_convention,festivals_parades,movies_film,food,fundraisers,support,book,music_alternative,music_dance,music_jazz,music_reggae,music_vocal,music_rap_hiphop,music_rock,music_pop,music_country,",
				when: "This Week",// "All", "Future", "Past", "Today", "Last Week", "This Week", "Next week", and months by name, e.g. "October"
				mode: "noFrame",// "Frame" or "noFrame" (around picture)
				apikey: "eventsapi",
				rotateInterval: 1 * 11 * 1000,// New Event Appears every 5 minutes
				useHeader: false,// Set to true if you want a header
				header: "",
				animationSpeed: 3000,// Event fades in and out
				picture: true,// true, false = no image
			}
		},
		{
			module: "MMM-TwitterTrendsByPlace",
			position: "bottom_right",
			config: {
			// visit the url below for the twitter keys/tokens
			// https://dev.twitter.com/oauth/overview/application-owner-access-tokens
				consumer_key: "twitterapi",
				consumer_secret: "twitterapi",
				access_token_key: "twitterapi",
				access_token_secret: "twitterapi",//set the display name/title for the place
				placeName: "New York, NY",// set the woeid for the place, see documentation for more// http://woeid.rosselliot.co.nz/lookup/
				placeWoeid: "2459115",
			}
		},
		{
			module: "MMM-nyc-transit",
			position: "bottom_left",
			header: "Next Train",
			config: {
				apiKey: "mytransitapi",
				displayType: "list",
				mtaType: "train",
				stations: [
					{
						stationId: 476,
						walkingTime: 0,
						dir: {
							upTown:true,
							downTown: false
						}
					},
				],
				updateInterval: 300000
			}
		},
		{
			module: "MMM-MTA",
			position: "bottom_left",
			header: "MTA",
			config: {
				lines: ["123", "BDFM", "456", "NQR", "ACE"],
				showDelaysOnly: false,
				delayAlertFlash: true,
				fetchInterval: 60000
			}
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "myweatherapi"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "myweatherapi"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "Asbury Park, NJ",
				locationID: "5095281", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "myweatherapi"
			}
		},
		{
			module: "newsfeed",
			position: "lower_third",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					},
					{
						title: "CNN",
						url: "http://rss.cnn.com/rss/cnn_topstories.rss"
					},
					{
						title: "BBC",
						url: "http://feeds.bbci.co.uk/news/world/us_and_canada/rss.xml"
					},
					{
						title: "NBC",
						url: "http://feeds.nbcnews.com/nbcnews/public/news"
					},
					{
						title: "Time News",
						url: "https://time.com/newsfeed/feed/"
					},
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[sdetweil]

@nipper2000h looks like a data change from the provider API

2020-06-30 09:41:59.974] [ERROR]  (node:882) UnhandledPromiseRejectionWarning: Error: Error: Illegal group end indicator for Message .transit_realtime.FeedMessage: 7 (not a group)
0|mm       |     at /home/pi/MagicMirror/modules/MMM-nyc-transit/node_helper.js:106:15

[nipper2000h]

@sdetweil Thank you for the info. You helped me out the first time I had an issue too, I’m very appreciative of your help once again. Does that mean the next step is too hope the contributor releases an update?

[sdetweil]

@nipper2000h yes, probably. I would post an issue to the module GitHub page to inform them

[nipper2000h]

@sdetweil Thanks again.

[Elaniobro]

@sdetweil what makes you think the API changed? ( I am the author, and am looking into it now)

[sdetweil]

@Elaniobro I posted a couple messages back the error info. node_helper line 106 called something which threw an error

2020-06-30 09:41:59.974] [ERROR]  (node:882) UnhandledPromiseRejectionWarning: Error: Error: Illegal group end indicator for Message .transit_realtime.FeedMessage: 7 (not a group)
0|mm       |     at /home/pi/MagicMirror/modules/MMM-nyc-transit/node_helper.js:106:15

[elliob]

@sdetweil how did you get to error message? What’s the CLI?

[sdetweil]

@elliob it was in the pm2 log in the 1st post of this topic

[nipper2000h]

@elliob I’m using pm2 to start MM so from the root directory:

pm2 logs mm