MMM-bergfex not working

Suboshi

Hi ,

sorry for bringing this up again. I also have the bergfex “loading…” issue. However, in the logs I can see the values are retrieved. They just don’t show in the mirror:

0|mm     | 83 snow reports from bergfex.at retrieved.
0|mm     | [2020-11-12 21:40:29.367] [LOG]    searching for Koralpe
0|mm     | [2020-11-12 21:40:29.369] [LOG]    searching for Hintertuxer Gletscher / Hintertux
0|mm     | [2020-11-12 21:40:29.370] [LOG]    searching for Ischgl
0|mm     | [2020-11-12 21:40:29.373] [LOG]    searching for Obergurgl - Hochgurgl
0|mm     | [2020-11-12 21:40:29.375] [LOG]    searching for Seefeld/Rosshütte
0|mm     | [2020-11-12 21:40:29.376] [LOG]    searching for Sölden
0|mm     | [2020-11-12 21:40:29.377] [LOG]    searching for Stubaier Gletscher / Stubaital
0|mm     | [2020-11-12 21:40:29.377] [LOG]    
0|mm     | [
0|mm     |   null,
0|mm     |   {
0|mm     |     skiarea: 'Hintertuxer Gletscher / Hintertux',
0|mm     |     tal: '-',
0|mm     |     berg: '135 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Ischgl',
0|mm     |     tal: '-',
0|mm     |     berg: '20 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Obergurgl - Hochgurgl',
0|mm     |     tal: '-',
0|mm     |     berg: '75 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   null,
0|mm     |   {
0|mm     |     skiarea: 'Sölden',
0|mm     |     tal: '19 cm',
0|mm     |     berg: '72 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   },
0|mm     |   {
0|mm     |     skiarea: 'Stubaier Gletscher / Stubaital',
0|mm     |     tal: '35 cm',
0|mm     |     berg: '110 cm',
0|mm     |     neu: '-',
0|mm     |     lifte: '0',
0|mm     |     update: ''
0|mm     |   }
0|mm     | ]

So the names of the resorts seem to be correct.
Any ideas on this one?

thanks
Chris

Suboshi

Argh… just 2 minutes after posting I found the issue:

I had 2 values “Koralpe” and “Seefeld/Rosshütte”, which were displayed in the log as NULL. Removing these entries made bergfex work…

Again, it was a typo ;)

thanks
Chris

FatTony123

Hi all,
I’ve created a fork and did some updates to the code and config.
You can now select the country where bergfex should choose the values from.

Feel free to test and let me know any feedback.
So far I can show multiple countries and their values…

MajorC

@FatTony123 can you explain how to use the fork? I am a total noob.

FatTony123

@MajorC Same approach as with other modules.
Get the repository via

git clone https://github.com/FatTony123/MMM-bergfex.git

and then run

npm install cheerio

then

npm install

That installs all relevant software. After that you need to setup your config file accordingly.

I’m not that active here, so you can reach me via github too …

sdetweil

@FatTony123 u shouldn’t have to do the separate install of cheerio as it is in the package.json

FatTony123

@sdetweil Thanks for the hint! (still not that familiar with npm ;-))
Updated the install instructions and package.json file accordingly.

MajorC

@FatTony123 said in MMM-bergfex not working:

Hi all,
I’ve created a fork and did some updates to the code and config.
You can now select the country where bergfex should choose the values from.

Feel free to test and let me know any feedback.
So far I can show multiple countries and their values…

Works like a charm. Thank you very much!

FatTony123

Great to hear, thanks!

Let me know if you have any question, comments or ideas for improvements…

Cheers!

MajorC

I never saw values for “neu” maybe they are not provided by the city. Perhaps this would be nice to have this optional to save some unused space.

And I will play around with the CSS at the weekend. I would like to have some more space between each column.