Config file not found

sdetweil · Mar 17, 2021, 10:10 PM

@mintpizza again show me the output and the config file

cowboysdude · Mar 17, 2021, 11:30 PM

Just copy your config file here…

mintpizza · Mar 18, 2021, 4:02 AM

pi@raspberrypi:~/MagicMirror/config $ npm run config:check

> magicmirror@2.14.0 config:check /home/pi/MagicMirror
> node js/check_config.js

[18.03.2021 09:29.40.609] [INFO]  Checking file...  /home/pi/MagicMirror/config/config.js
[18.03.2021 09:29.40.676] [ERROR] Your configuration file contains syntax errors :(
[18.03.2021 09:29.40.678] [ERROR] Line 49 col 3 Parsing error: Unexpected token {
pi@raspberrypi:~/MagicMirror/config $

mintpizza · Mar 18, 2021, 4:07 AM

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules:  
		{
			module: "alert",
		},
		
			module: "updatenotification",
			position: "top_bar"
		},
		
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
{
	module: "MMM-cryptocurrency",
	position: "top_right",
	config: {
		apikey: '1234-5678-9009-8765-4321',
		currency: ['ethereum', 'bitcoin'],
		conversion: 'EUR',
		headers: ['change24h', 'change1h', 'change7d'],
		displayType: 'logoWithChanges',
		showGraphs: true
	}
},




	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

BKeyport · Mar 18, 2021, 4:24 AM

@mintpizza said in Config file not found:

	modules:

should be

	modules:  [

As a start.

mintpizza · Mar 18, 2021, 4:28 AM

@BKeyport I wrote this and still check wants me to delete all mdules

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw https://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", 	// Address to listen on, can be:
							// - "localhost", "127.0.0.1", "::1" to listen on loopback interface
							// - another specific IPv4/6 to listen on a specific interface
							// - "0.0.0.0", "::" to listen on any interface
							// Default, when address config is left out or empty, is "localhost"
	port: 8080,
	basePath: "/", 	// The URL path where MagicMirror is hosted. If you are using a Reverse proxy
					// you must set the sub path here. basePath must end with a /
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], 	// Set [] to allow all IP addresses
															// or add a specific IPv4 of 192.168.1.5 :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
															// or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
															// ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "en",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
	// local for armv6l processors, default
	//   starts serveronly and then starts chrome browser
	// false, default for all NON-armv6l devices
	// true, force serveronly mode, because you want to.. no UI on this device

	modules: [  
		{
			module: "alert",
		},
		
			module: "updatenotification",
			position: "top_bar"
		},
		
		{
			module: "calendar",
			header: "US Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics"					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "https://rss.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true,
				broadcastNewsFeeds: true,
				broadcastNewsUpdates: true
			}
		},
{
	module: "MMM-cryptocurrency",
	position: "top_right",
	config: {
		apikey: '1234-5678-9009-8765-4321',
		currency: ['ethereum', 'bitcoin'],
		conversion: 'EUR',
		headers: ['change24h', 'change1h', 'change7d'],
		displayType: 'logoWithChanges',
		showGraphs: true
	}
},




	]
};
]
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

mintpizza · Mar 18, 2021, 4:30 AM

@mintpizza

pi@raspberrypi:~/MagicMirror/config $ npm run config:check

> magicmirror@2.14.0 config:check /home/pi/MagicMirror
> node js/check_config.js

[18.03.2021 09:56.31.426] [INFO]  Checking file...  /home/pi/MagicMirror/config/config.js
[18.03.2021 09:56.31.476] [ERROR] Your configuration file contains syntax errors :(
[18.03.2021 09:56.31.478] [ERROR] Line 45 col 10 Parsing error: Unexpected token :
pi@raspberrypi:~/MagicMirror/config $

BravoOscar · Mar 18, 2021, 7:44 AM

@mintpizza

You are missing a {
before module: “updatenotification”,

It should be:

                {
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},