MMM-weatherchart sdetweil fork

[MajorC]

@sdetweil thank you.
I cleaned up my configuration. Only MMM-weatherchart is in.

	{
			module: 'mmm-weatherchart',
			position: 'bottom_right', // this can be any of the regions
			config: {
				country: 'Germany', // as determined above
				area: 'Berlin', // as determined above
				city: 'Berlin', // as determined above
				updateInterval: 60 * 60 * 1000, // update every hour
				hideBorder: true, // whether or not a border with city name should be shown
				negativeImage: true, // whether or not the default white image should be inverted
				retryDelay: 2500,
				domain: "www.yr.no",
				path: "/place/",
				mmDirectory: "/home/pi/MagicMirror/", // not sure whether it is possible to ask MM for this path?
				hoursToShow: 24
			}
		},

the error message is:

undefined:1 GET http://192.168.2.16:8080/undefined 404 (Not Found)

I don’t know how I can provide better information to solve this?!?

[MajorC]

I would like to open this topic again.

The error:

undefined:1 GET http://192.168.2.16:8080/undefined 404 (Not Found)

is still present. Any advise is highly appreciated.

[sdetweil]

@majorc where do u see that error? npm start or developers window?

[sdetweil]

@sdetweil where is your mm installed? (path from root)

/home/pi/MagicMirror

??

[MajorC]

@sdetweil

I see the error in the developers window in google chrome if I connect remotely to the pi.

/home/pi/MagicMirror is correct for my setup.

[sdetweil]

@majorc the code tries to build the url from these settings

var mapLocal = this.config.path + this.config.country + "/" + this.config.area + "/" + this.config.city + "/meteogram.png";

the defaults are

		country: 'Germany',
		area: 'North_Rhine-Westphalia',
		city: 'Duisburg',
		path: "/place/",

no spaces allowed in any

[MajorC]

@sdetweil

that is my config:

		{
			module: 'mmm-weatherchart',
			position: 'bottom_right', // this can be any of the regions
			config: {
				country: 'Germany', // as determined above
				area: 'Berlin', // as determined above
				city: 'Berlin', // as determined above
				updateInterval: 60 * 60 * 1000, // update every hour
				hideBorder: true, // whether or not a border with city name should be shown
				negativeImage: false, // whether or not the default white image should be inverted
				retryDelay: 2500,
				domain: "www.yr.no",
				path: "/place/",
				mmDirectory: "/home/pi/MagicMirror/", // not sure whether it is possible to ask MM for this path?
				hoursToShow: 36
			}
		},

Ich wechsle mal kurz ins Deutsche. Das interessante ist, dass mir die Grafik auch angezeigt wird. Also gefühlt läuft der Code ohne Fehler. Mich wundert nur die Fehlermeldung, die in Chrome, wenn ich mich remote auf den Pi/MM einwähle, kommt. Als ob er noch irgend was versucht abzurufen, was nicht gefunden werden kann.

[sdetweil]

@majorc das Interessante ist die Adresse
192.168.2.16 MUSS in Ihrem lokalen Netzwerk sein und ist vielleicht die Adresse des PI. Der Code versucht, Dinge auf der ned_helper-Seite zwischenzuspeichern, und ich weiß nicht, wie diese Informationen verwendet werden.

[MajorC]

@sdetweil you are right. 192.168.2.16 is the IP adress of my PI.

[sdetweil]

@majorc I’ll try to look at the code . busy this week, gone next