MMM-windyV2 module installed, but have a problem

[DavidSung]

hellow, I installed MMM-windyV2 and set config.js also.

but when I npm run start, it’s working other modules, but not working MMM-windyV2

just black screen and date, newsfeed etc.

here is my cord.

broadcastNewsUpdates: true
}
},
{
module: ‘MMM-AirQuality’,
position: ‘top_right’,
config: {
location: ‘korea/gyeonggi/gunpo-si/dang-dong/’,
lang: ‘kr’
}
},
{
module: “MMM-WindyV2”,
position: ‘fullscreen_above’, // this must be set to ‘fullscreen_above’
config: {
apiKey: ‘N0KGdbz9qUYjaAbW6X0L311BHBBmGcQk’, // insert your free or paid API key here
initLoadDelay: 50, // optional, default is 50 milliseconds
latitude: 127.7, // example: 69.123
longitude: 36.6, // example: 17.123
zoomLevel: 6, // set your preferred zoom level
showLayer: ‘rain’, // wind, rain, clouds, temp, pressure, currents, waves
rotateLayers: false, // set to true to rotate layers
layersToRotate: [‘wind’,‘rain’], // layers to rotate
delayRotate: 5000, // delay between rotated layers, in milliseconds
wMinZoom: 3, // set minimum zoom level for WindyV2
wMaxZoom: 17, // set maximum zoom level for WindyV2
windyMetric: ‘m/s’, // ‘kt’, ‘bft’, ‘m/s’, ‘km/h’ and ‘mph’
updateTimer: 60 * 60 * 1000 * 6, // update per 6 hours
retainZoom: true // retain zoomlevel between changing overlays
}
},
// {
// module: “MMM-windy”,
// position: ‘fullscreen_above’, // this must be set to ‘fullscreen_above’
// config: {
// apiKey: ‘N0KGdbz9qUYjaAbW6X0L311BHBBmGcQk’,
// initLoadDelay: 50, // optional, default is 50 milliseconds
// location: { // optional location in latitude and longitude
// lat: 36.5,
// lng: 127.7,
// },
// zoom: 3, // optional zoom level, default is 5. Bigger numbers zoom closer
// particlesAnim: ‘on’, // optional, turns particles animation on or off, default ‘on’
// graticule: false, // optional
// englishLabels: false, // optional
// hourFormat: ‘12h’, // optional
// overlay: ‘wave’ //optional
// }
// },

]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== “undefined”) {module.exports = config;}

[cowboysdude]

@davidsung Just a thought here and is very common. If you copied and pasted the config example from Github then it will not work. Go through and edit all your ’ and " and change them. For some reason they do not copy well and create errors.

Give that a try first!

[mumblebaj]

@davidsung Does seem to be related to the quotes. Also, please always remove your API Keys prior to posting. ;-)

[DavidSung]

@cowboysdude thx , I will try that way :)

[DavidSung]

@mumblebaj thx for ur reply, :) I didn’t thought about API key. will remove that