Read the statement by Michael Teeuw here.
Advise for a voice assistant
-
@THeStigh Indeed, using it on a Rasp 3 b+ fully up to date.
-
@ejay-ibm
I was able to run MK2assistant but never managed to install Hotword.
Is there a tutorial out there which shows me how to do it, absolute beginner style? -
@thedoorsfanatic
I think the Readme here : https://github.com/eouia/MMM-Hotword/
is pretty clear, that is what I followed and I have it working directly.
check out the Tip section to include hotword in the mk2 assistant and you should be good.
If you run into issue you can share your config file and I can have a look .Ejay
-
@ejay-ibm
all right, thanks, I will try it again but usually it failed when trying to install snowboy -
@thedoorsfanatic
Give me a telegram When you are stuck on. Telegram:@eouia -
What hardware and OS are you using ?
-
@THeStigh
I am using a Raspi 3 B+ and latest release of Stretch and MagicMirror.
I am a newbie and though I tried all the troubleshooting tipps described I wasn’t able to install Hotword and snowboy. -
@thedoorsfanatic Snowboy can be tricky, but @sean has made some good troubleshooting guides on the page for MMM-Hotword. But you can delete the MMM-Hotword folder and try to re-install it following these instructions to do it quite manually. If it fails, you at least will get a clear picture of where it actually failed:
cd ~/MagicMirror/modules/ sudo apt-get install libmagic-dev libatlas-base-dev sox libsox-fmt-all git clone https://github.com/eouia/MMM-Hotword.git cd MMM-Hotword npm install cd ~/MagicMirror/modules/MMM-Hotword/node_modules/snowboy npm install --save-dev electron-rebuild npm install nan ./node_modules/.bin/electron-rebuild
-
This is the error code:
snowboy@1.3.1 install /home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy
node-pre-gyp install --fallback-to-buildnode-pre-gyp ERR! Tried to download(403): https://snowboy-release-node.s3-us-west-2.amazonaws.com/snowboy/v1.3.1/Release/snowboy-v1.3.1-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for snowboy@1.3.1 and node@10.15.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp)
node-pre-gyp ERR! Tried to download(undefined): https://snowboy-release-node.s3-us-west-2.amazonaws.com/snowboy/v1.3.1/Release/snowboy-v1.3.1-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for snowboy@1.3.1 and node@10.15.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp)
internal/modules/cjs/loader.js:583
throw err;
^Error: Cannot find module ‘nan’
at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15)
at Function.Module._load (internal/modules/cjs/loader.js:507:25)
at Module.require (internal/modules/cjs/loader.js:637:17)
at require (internal/modules/cjs/helpers.js:22:18)
at [eval]:1:1
at Script.runInThisContext (vm.js:96:20)
at Object.runInThisContext (vm.js:303:38)
at Object. ([eval]-wrapper:6:22)
at Module._compile (internal/modules/cjs/loader.js:689:30)
at evalScript (internal/bootstrap/node.js:587:27)
gyp: Call to ‘node -e “require(‘nan’)”’ returned exit status 1 while in binding.gyp. while trying to load binding.gyp
internal/modules/cjs/loader.js:583
throw err;
^Error: Cannot find module ‘nan’
at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15)
at Function.Module._load (internal/modules/cjs/loader.js:507:25)
at Module.require (internal/modules/cjs/loader.js:637:17)
at require (internal/modules/cjs/helpers.js:22:18)
at [eval]:1:1
at Script.runInThisContext (vm.js:96:20)
at Object.runInThisContext (vm.js:303:38)
at Object. ([eval]-wrapper:6:22)
at Module._compile (internal/modules/cjs/loader.js:689:30)
at evalScript (internal/bootstrap/node.js:587:27)
gyp: Call to ‘node -e “require(‘nan’)”’ returned exit status 1 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gypgyp ERR! stack Error:gyp
failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
ERR!gyp ERR!configure error
stack at ChildProcess.emit (events.js:189:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.14.98-v7+
gyp ERR!gyp stack Error:gyp
failed with exit code: 1
ERR!gyp commandERR! “/usr/bin/node” “/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js” “configure” “–fallback-to-build” “–module=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm/snowboy.node” “–module_name=snowboy” “–module_path=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm”
stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
gyp gypERR! ERR!stack at ChildProcess.emit (events.js:189:13)
cwdgyp /home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy
ERR! gypstack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
ERR! node -v v10.15.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
gyp ERR! System Linux 4.14.98-v7+
gyp ERR! command “/usr/bin/node” “/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js” “configure” “–fallback-to-build” “–module=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm/snowboy.node” “–module_name=snowboy” “–module_path=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm”
gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy
gyp ERR! node -v v10.15.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute ‘/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm/snowboy.node --module_name=snowboy --module_path=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm’ (1)
node-pre-gyp ERR! stack at ChildProcess. (/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack at ChildProcess.emit (events.js:189:13)
node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:970:16)
node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.14.98-v7+
node-pre-gyp ERR! command “/usr/bin/node” “/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/.bin/node-pre-gyp” “install” “–fallback-to-build”
node-pre-gyp ERR! cwd /home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy
node-pre-gyp ERR! node -v v10.15.2
node-pre-gyp ERR! node-pre-gyp -v v0.6.39
node-pre-gyp ERR! not ok
Failed to execute ‘/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm/snowboy.node --module_name=snowboy --module_path=/home/pi/MagicMirror/modules/MMM-Hotword/node_modules/snowboy/lib/node/binding/Release/node-v64-linux-arm’ (1)
npm WARN MMM-Hotword@1.1.0 No repository field.npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! snowboy@1.3.1 install:node-pre-gyp install --fallback-to-build
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the snowboy@1.3.1 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above. -
@ejay-ibm, @THeStigh i have installed MMM-Hotword. I hope correctly? as i got only warning via npm like
npm WARN MMM-Hotword@1.1.0 No repository field. pi@raspberrypi:~/MagicMirror/modules/MMM-Hotword $ npm install --save snowboy npm WARN deprecated cryptiles@2.0.5: This version is no longer maintained. Please upgrade to the latest version. npm WARN deprecated boom@2.10.1: This version is no longer maintained. Please upgrade to the latest version. npm WARN deprecated hoek@2.16.3: This version is no longer maintained. Please upgrade to the latest version. npm WARN MMM-Hotword@1.1.0 No repository field.
I am not sure how i can test it tho?
Or there is nothing to expect with only MMM-hotword installed?
(sorry if my question is stupid :) )