Read the statement by Michael Teeuw here.
Pi power adapter
-
I’m having a difficult time trying to keep the mirror assembly as thin as possible off the wall and one of the main culprits is the large Pi’s bulky power adapter. Can I switch it out for one like the picture below + USB cable. And what do I need to pay attention to if I do…like Amps for example.
thanks
-
@lpgjg use an extension cord so u can turn it sideways.
-
@lpgjg - I just went through this and it’s a bit of a headache.
You are correct in that you need to supply enough power to the Pi and the Pi is relatively thirsty. You want to find a USB adapter that supplies a minimum of 2.5A. Any less than that and you’ll get a lightning bolt in the upper right corner of your mirror. And possibly weird errors.
If you can find a source for 2.5A on a USB plug, you’re golden.
-
@bhepler Thank you, appreciate it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login