updated installer script available for testing
@Neebotol great work!! Yeh, having a bad card will.make things very challenging.
Thanks for the feedback
Forgot I did not get back to you. After much testing it was not feasible to use an rpi zero. Actually the ram/memory was ok, the main limitation was the cpu.
I was using htop to monitor this during boot and normal usage, is was constantly at 100%. This caused really slow boot time and could not load the modules fully even if left for several hours.
As soon as I went back to my rpi3 with the same modules it started very quick in comparison with no boot issues.
@NathTheDude thank you for the feedback. Yes Pi 0 is really limited in what it can do.
electron has become unavailable for armv6l and node >8, so we’ve had to go split mode
Do anyone know if the link bash -c “$(curl -sL https://www.dropbox.com/s/izj6dz2z9557oga/raspberry.sh?dl=0)” can be found elsewhere?
It worked great on Raspberry Pi (1) but now it’s 404:-/
As they were removed from the last release
This was also corrected on the 1st post of this topic.
Sowwy I didn’t see that…
@PinkPumpkin no problem!.. its hard to keep stuff up to date here… lots of folks use 3 year old ‘cookbooks’, that no longer work…
@sdetweil Hi, when I install your MM installer script on my Mac, does it install pm2 automatically.
@Stoffbeuteluwe it will if u select yes when prompted