MMM-MarineWeather

[minomit]

@grena

config: {
latitude: 40.10 , // Latitude
longitude: 18.52, // Longitude
appid: “xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx” // StormGlass API key (docs.stormglass.io)
}

[grena]

@minomit

With your MMM-MarineWeather configuration, it works fine !

{
	module: "MMM-MarineWeather",
	position: "top_right",
	config: {
		latitude: 40.10 , // Latitude
		longitude: 18.52, // Longitude
		appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004" // API Key for your tests
	}
},

Since I can’t reproduce your bug, you have to see if there are any error messages in the console! To start MagicMirror with DevTools open, run npm start dev from the MagicMirror folder like this in a terminal cd ~/MagicMirror/ && npm start dev.

[minomit]

@grena I0m copy/past some problem:

{
            module: "MMM-MarineWeather",
            "pages": {
                            "tempo reale": "top_right"
            },
            //position: "top_right",
            config: {
                latitude: 40.10 , // Latitude
                longitude: 18.52, // Longitude
                appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004" // API Key for your tests
            }
        },

edited, PLEASE use the markup around code and config blocks (three backtics on a separate line before and after)

[grena]

@minomit, do you use MMM-Page-Selector ?

I wanted to do a final test to reproduce your bug by installing MMM-Page-Selector, it works ! So, I added some error messages in the module to get more information but you will have to look at the console when starting MagicMirror with DevTools.

[ryanbeljan]

@grena this is a super cool module! I noticed that there are quite a few other weather parameters that the StormGlass API offers (i.e. gust, cloudCover, seaLevel, visibility, etc.) that aren’t yet built into your module. Do you have any tips/guide for how I would go about adding them in?

https://docs.stormglass.io/#/weather

[boivinmi]

@grena I also have the same behavior. Here is my config :

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004",
      dataSource: "sg",
      params: "airTemperature,windSpeed,windDirection"
   }
},

And result is :

[Deckard99]

I’m having the same issue where it just displays “Loading”…….

{
module: “MMM-MarineWeather”,
position: “top_right”,
config: {
latitude: 32.7157,
longitude: 117.16,
appid: “XXXXXXXX-9a15-11ea-b3e2-0242ac130002-9be8a7f6-9a15-11ea-b3e2-0242ac130002” //StormGlass API Key (docs.stormglass.io)
}
},

[grena]

@ryanbeljan : Thank you for your positive feedback. I will work on a new version of the module to use the new information of API v2 (currently the module uses API v1) ;)

@boivinmi : Currently, it’s not possible to choose the information displayed with params. By removing this line from your configuration, it works fine!

@Deckard99 : Indeed, there is a problem with waveHeight at your location (probably because it is a lake and not the sea). In the next version, I will integrate a better detection of this type of error to avoid the total blocking of the module!

[boivinmi]

@grena : Sorry no luck, I removed every config except latitude, longitude et appid and it still shows Loading…

[grena]

@boivinmi
With your MMM-MarineWeather configuration, it works fine! Did you restart the magic mirror?

{
   module: "MMM-MarineWeather",
   header: "Marine Weather",
   position: "top_right",
   config: {
      latitude: 46.829853,  // Latitude 
      longitude: -71.254028, // Longitude
      appid: "414492aa-c717-11e9-a3da-0242ac130004-4144953e-c717-11e9-a3da-0242ac130004"
   }
},

Since I can’t reproduce your bug, you have to see if there are any error messages in the console!