PI Zero module issues for this beginner

[sdetweil]

erase the current MagicMirror folder (rm -rf MagicMirror )

and run the install script again , they changed some upstream library to hard fail…
but we didn’t need it anyhow…

[sdetweil]

@wagon40 said in PI Zero module issues for this beginner:

I appreciate your help and putting up with a noob

we were all noobs once…

[sdetweil]

@sdetweil my test of installer on buster on pi 0, comes up running fine now

[wagon40]

was able to get it to work. only issues is screensaver continues to active.
tried this with no luck

sudo nano /etc/xdg/lxsession/LXDE/autostart

add the following lines:

@xset s noblank
@xset s off
@xset -dpms
Save and close, using the commands CTRL-O and CTRL-X.

Go to lightdm.conf:

sudo nano /etc/lightdm/lightdm.conf

add the following lines:

xserver-command=X -s 0 -dpms

[sdetweil]

@wagon40 I noticed that too.

Do this

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)"

[wagon40]

@sdetweil said in PI Zero module issues for this beginner:

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/screensaveroff.sh)”

looks like it worked! working on a my-commute issue at this time.

[sdetweil]

@wagon40 thanks… i’ve copied the same process steps over to the installer… thought I had done that.