Read the statement by Michael Teeuw here.
MMM-Fitbit2
-
@sdetweil I’m not sure that that makes sense. If you have a target resting heart rate of 55, but you’re at 60, what is your progress %?
-
@Vizulize 9% over 1-(60/55), 54 out of 55 would be 2% under 1-(54/55),
absolute value, rounded to 2 decimal places, * 100
if number is negative, you are over target and positive u are under target -
Progress % is from 0-100. You have a start point, an end point, and are between the 2. “9% over” and “2% under” are not records of progress.
If I recorded 9% over as 109%, and rounded to 100%, it would indicate that your progress towards your target resting heart rate (RHR) is 100%. 2% under would mean that you are at 98% “complete”.
They may be percentages, but progress is absolute, and your calculations are relative. It would make more sense to keep the RHR data and create a better representation of it (e.g. a histogram - which is what Fitbit actually does).
-
@Vizulize as youve shown, not everything has a ‘progress’ number. but can still have a target
-
@sdetweil Ok, I see what you’re saying. I’ve added it to the extending functionality GitHub project board. Seems quite minor though.
-
@Vizulize Those icons would look nice in color too.
-
@Vizulize I’m setting this up and almost everything was smooth except when I get to the client secret. It won’t let me paste, or type anything to move forward. Any suggestions?
-
@Fr8Trayne It’s a password entry step - it won’t show up in the terminal. Perhaps that is not clear enough, or just isn’t necessary! Just paste and hit ENTER to continue.
-
Ah thank you! I was confused there. I’ll give it another go and let you know how it turns out.
-
@Vizulize So I clicked continue and it gets stuck at Opening web browser… I’ve tried doing it a few times now, but it’s not moving forward. Advice?
-
@Fr8Trayne Are you SSH’d in to your machine? You need to be on the machine locally, so that the browser can open, and you can log in to Fitbit in the browser.
This is all great feedback though - thanks for being patient!
-
@Vizulize no problem. I’m great at finding the problems 😉. I’ll have to connect directly to the Raspberry pi and try again. I’ll let you know how it goes.
-
Hello,
When I’m asked to enter the “Client Secret”, in ssh (on the pi of the MagicMirror), I cannot type or paste anything.
What’s the solution ? -
@mattx38 - Read two messages above your post. You must work directly on the Pi in order to make it through the Fitbit login process. You can’t do this through an SSH connection.
-
@bhepler I did it directly from the terminal of the MMM Pi, sorry for my wrong explaination.
-
Hello,
I’ve installed MMM-Fitbit2 according the instructions.
Unfortunately on the MM screen the module says “Loading…” instead of showing any symbols.
Could someone help me? -
@chsp - You will probably need to check the logs and see if there are any error messages.
First, get an SSH connection to your Pi (assuming it’s a Pi) and type
pm2 log 0. Look for any errors. If you see none, point a web browser at your Pi’s IP address and use that to pull up the mirror’s interface. Press F12 to open the developer’s window and look in the Console tab for any errors.That should get you started.
-
Hi, the module works fine …:clapping_hands_medium-light_skin_tone:
-
This post is deleted! -
This post is deleted!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login