MMM-Netatmo updated

Miller

Hi all,
I started with my first MagicMirror, and wasn’t completely happy with the default MMM-Netatmo weather module, so I modified it a bit.

I don’t have a lot of experience with webdesign, but it fits my purposes.
Maybe someone else will find my project usefull as well.

Preview Module

[card:RaymondMolenaar/MMM-Netatmo]

Greetings Raymond Molenaar

sdetweil

@Miller can u describe what your changes enable

Miller

@sdetweil
I tried to upload a picture but it didn’t work
Pictures are also included in my github repository.

In the Original CFenner repo, if a weathermodule wasn’t in reach, the MMM-Module kept loading. This is fixed. All weathermodules are always displayed, even when not in reach, but then with “–” values and possible message.

The haywirecoder fork included AIRQuality, and the Rain and Wind-module were integrated in Outdoor. However, depending on the order in which the weathermodules where displayed, the rain and wind values were not always displayed.

So I changed that first all modules are read from netatmo (then all values are loaded).
Also you can now configure if you want the wind and rain module integrated in “outdoor” or displayed as own weathermodules.

Also it is possible to configure your wind-speed-units (kmh, mph, Bft, ms or Kt)
also i redesigned the modules so that the data is displayed grouped as it is in the android-app).

See also my Readme: https://github.com/RaymondMolenaar/MMM-Netatmo/blob/master/README.md

sdetweil

@Miller great info, thanks…

pics, yes has been reported multiple times so far… site support hasn’t done anything about it (yet)

Miller

@sdetweil said in MMM-Netatmo updated:

@Miller great info, thanks…

pics, yes has been reported multiple times so far… site support hasn’t done anything about it (yet)

You’re welcome, hope i did a half decent job.
Thanks for the info about pics upload.

torte22

This week I switched from CFenner’s netatmo module to this fork. I’m very happy with the new MMM-Netatmo. I had a lot of problems with my old configuration, the module “netatmo” stops updating after approx. 10 - 20 hours. After this period I didn’t got data from my own Netatmo station and the only fix was to restart mm. Now it runs with regularly updated data. And - I Like the different Look and Feel :thumbs_up_medium-light_skin_tone:
Thank you for the “refurbished” module

Miller

@torte22 You’re welcome

zdenek

hi, is there way, how to show rooms in one row, instead of in one column?

thanks
Zdeněk

Miller

@zdenek Not in this version at the moment

zdenek

@Miller thanks, so I’ll have to wait, no problem